-----Original Message-----
From: John Refling [mailto:netbsdrat%gmail.com@localhost]
Sent: Friday, August 14, 2015 3:12 AM
To: 'netbsd-bugs%netbsd.org@localhost'
Subject: netbsd 7.0 rc3 amd64 fails on HP dc5700
Tried the rc3 and it crashes very early in the attempted boot. see screen
shot attached.
Tried option #3, no ACPI or SMP, same thing.
USB keybd is unresponsive after the crash.
Machine booted the following OK:
Pentoo64, Ubuntu Amd 64, XP 64, FreeBSD 10.0 Amd 64, Jibbed (NetBSD 6.0
live Amd64).
Dmesg from Jibbed 6.0 below:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.0 (JIBBED6) #0: Fri Nov 2 02:51:50 CET 2012
root%amd64.aydogan.net@localhost:/root/livecd/work/JIBBED6
total memory = 1015 MB
avail memory = 970 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Compaq dc5700 Microtower ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) 4 CPU 3.20GHz, id 0xf65
cpu1 at mainbus0 apid 1: Intel(R) Pentium(R) 4 CPU 3.20GHz, id 0xf65
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,20060831>, AslId < ,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
ECP0 (PNP0401) at acpi0 not configured
COM1 (PNP0501) at acpi0 not configured
FDC0 (PNP0700) at acpi0 not configured
APIC (PNP0003) at acpi0 not configured
SBD1 (PNP0C02) at acpi0 not configured
SBD2 (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
MBRD (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2990 (rev. 0x02)
agp0 at pchb0: detected 7676k stolen memory
agp0: aperture at 0xe0000000, size 0x20000000
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2992 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
i915drm0 at vga0: Intel i965Q
i915drm0: AGP at 0xe0000000 256MB
i915drm0: Initialized i915 1.6.0 20080730
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x02)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 21
hdafg0 at hdaudio0: Realtek ALC260
hdafg0: DAC00 2ch: Speaker [Jack], HP Out [Jack]
hdafg0: ADC02 2ch: Line In [Jack], AUX [Built-In], Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x02)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 32
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x02)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 63
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci2 dev 0 function 0: Broadcom BCM5755 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 17
bge0: adjust device control 0x102004 -> 0x105004
bge0: ASIC BCM5755 A2 (0xa002), Ethernet address 00:1a:4b:45:7d:dc
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5755 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 20
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 21
usb4 at uhci3: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x02)
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3
usb5 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xf2)
pci3 at ppb2 bus 7
pci3: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2810 (rev.
0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 2: Intel 82801H Serial ATA Controller
(ICH8) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 5: Intel 82801H Serial ATA Controller
(ICH8) (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using ioapic0 pin 18 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel wired to native-PCI mode
atabus3 at piixide1 channel 1
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: Broadcom BCM0102 rev 0x2
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: I/O, lat 160 us, pow 135000 mW, 3200 MHz
acpicpu0: P1: I/O, lat 160 us, pow 109784 mW, 2800 MHz
acpicpu0: P2: I/O, lat 160 us, pow 86400 mW, 2400 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3192143360 Hz quality 3000
uhub0 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr
1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr
1
uhub3: 4 ports with 4 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
1
uhub4: 2 ports with 2 removable, self powered
acpicpu1: failed to set frequency to 2400 (err 35)
uhub5 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr
1
uhub5: 2 ports with 2 removable, self powered
acpicpu0: failed to set frequency to 2400 (err 35)
acpicpu0: failed to set frequency to 2400 (err 35)
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Microsoft Wired Keyboard 600, rev 1.10/1.10, addr 2, iclass 3/1
ukbd0 at uhidev0
uhidev1 at uhub4 port 1 configuration 1 interface 0
uhidev1: vendor 0x15d9 USB Mouse, rev 1.10/1.00, addr 2, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub1 port 2 configuration 1 interface 1
uhidev2: Microsoft Wired Keyboard 600, rev 1.10/1.10, addr 2, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=1, output=0, feature=0
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorp CD-RW/DVD-ROM TS-H493B, , D300> cdrom
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using
DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: cd0
root on cd0a
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
i915drm0: interrupting at ioapic0 pin 16
set{u,g}id pid 265 (gnome-pty-helper) was invoked by uid 1000 ppid 998
(Terminal) with fd 2 closed