Re: kern/51300: wd* sometimes not detected

[Martin Husemann <martin%duskware.de@localhost>]

The following reply was made to PR kern/51300; it has been noted by GNATS.

From: Martin Husemann <martin%duskware.de@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: kern/51300: wd* sometimes not detected
Date: Thu, 5 Jan 2017 14:49:34 +0100

 OK, this looks better:
 
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 jmide0 at pci2 dev 0 function 0: vendor 0x197b product 0x2363 (rev. 0x10)
 jmide0: 1 PATA port, 2 SATA ports
 jmide0: interrupting at ioapic0 pin 17
 ahcisata0 at jmide0
 ahcisata0: AHCI revision 1.10, 2 ports, 32 slots, CAP 0xc722ff01<PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A>
 atabus0 at ahcisata0 channel 0
 atabus1 at ahcisata0 channel 1
 jmide1 at pci2 dev 0 function 1: vendor 0x197b product 0x0368 (rev. 0x10)
 jmide1: 1 PATA port
 jmide1: interrupting at ioapic0 pin 18
 jmide1: PCI IDE interface used
 jmide1: bus-master DMA support present
 jmide1: primary channel wired to native-PCI mode
 jmide1: primary channel is PATA
 atabus2 at jmide1 channel 0
 jmide1: secondary channel wired to native-PCI mode
 jmide1: secondary channel is unused
 
 ... but unfortunately the IDENTIFY issue remains.
 
 Martin