Re: kern/51797: iwm(4) does not work after if_iwm.c rev. 1.45

[Ryo ONODERA <ryo_on%yk.rim.or.jp@localhost>]

The following reply was made to PR kern/51797; it has been noted by GNATS.

From: Ryo ONODERA <ryo_on%yk.rim.or.jp@localhost>
To: nonakap%gmail.com@localhost
Cc: gnats-bugs%netbsd.org@localhost
Subject: Re: kern/51797: iwm(4) does not work after if_iwm.c rev. 1.45
Date: Sun, 08 Jan 2017 18:48:11 +0900 (JST)

 Hi,
 
 From: Kimihiro Nonaka <nonakap%gmail.com@localhost>, Date: Sun, 8 Jan 2017 18:22:37 +0900
 
 >> $ pcictl pci0 list | grep -i wireless
 >> 002:00:0: Intel Dual Band Wireless AC 7265 (miscellaneous network, revision 0x59)
 > 
 > Could you send a full dmesg?
 
 Here is full dmesg with if_iwm.c rev. 1.51.
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 7.99.56 (DTRACE7) #1: Sun Jan  8 18:43:08 JST 2017
 	ryo_on@brownie:/usr/world/7.99/amd64/obj/sys/arch/amd64/compile/DTRACE7
 total memory = 8103 MB
 avail memory = 7847 MB
 cpu_rng: RDSEED
 rnd: seeded with 128 bits
 timecounter: Timecounters tick every 10.000 msec
 Kernelized RAIDframe activated
 running cgd selftest aes-xts-256 aes-xts-512 done
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 TOSHIBA dynabook R63/PS (PRB63PS-NDC)
 mainbus0 (root)
 ACPI: RSDP 0x00000000000F0030 000014 (v00 TOSHIB)
 ACPI: RSDT 0x00000000D90ED000 000068 (v01 TOSHIB A0096    00000003      01000013)
 ACPI: FACP 0x00000000D90EC000 00010C (v05 TOSHIB A0096    00000003 LOHR 0000005F)
 ACPI: DSDT 0x00000000D90CF000 01264F (v02 TOSHIB A0096    20150216 INTL 20130927)
 ACPI: FACS 0x00000000D9099000 000040
 ACPI: HPET 0x00000000D90EB000 000038 (v01 TOSHIB A0096    00000001 LOHR 0000005F)
 ACPI: APIC 0x00000000D90EA000 0000BC (v01 TOSHIB A0096    00000001 LOHR 0000005F)
 ACPI: MCFG 0x00000000D90E9000 00003C (v01 TOSHIB A0096    00000001 LOHR 0000005F)
 ACPI: ASF! 0x00000000D90E8000 0000A0 (v32 TOSHIB A0096    00000001 LOHR 0000005F)
 ACPI: TCPA 0x00000000D90E7000 000032 (v02 TOSHIB A0096    00000000 LOHR 0000005F)
 ACPI: BOOT 0x00000000D90E6000 000028 (v01 TOSHIB A0096    00000000 LOHR 0000005F)
 ACPI: MSDM 0x00000000D90E5000 000055 (v03 TOSHIB A0096    00000000 LOHR 0000005F)
 ACPI: SLIC 0x00000000D90E4000 000176 (v01 TOSHIB A0096    00000000 LOHR 0000005F)
 ACPI: DBGP 0x00000000D90E3000 000034 (v01 TOSHIB A0096    00000000 LOHR 0000005F)
 ACPI: SSDT 0x00000000D90CE000 0003F9 (v02 TOSHIB SataAhci 00001000 INTL 20130927)
 ACPI: SSDT 0x00000000D90C8000 00060D (v02 TOSHIB MacUniq2 00001000 INTL 20130927)
 ACPI: SSDT 0x00000000D90C7000 0005E6 (v02 PmRef  Cpu0Ist  00003000 INTL 20130927)
 ACPI: SSDT 0x00000000D90C6000 000B60 (v02 CpuRef CpuSsdt  00003000 INTL 20130927)
 ACPI: SSDT 0x00000000D90C4000 0012DF (v02 SaSsdt SaSsdt   00003000 INTL 20130927)
 ACPI: DMAR 0x00000000D90C3000 0000D8 (v01 INTEL  BDW      00000001 INTL 00000001)
 ACPI: FPDT 0x00000000D90E2000 000044 (v01 TOSHIB A0096    00000000 LOHR 0000005F)
 ACPI: Executed 9 blocks of module-level executable AML code
 ACPI: Executed 2 blocks of module-level executable AML code
 ACPI: 6 ACPI AML tables successfully acquired and loaded
 ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 40 pins
 cpu0 at mainbus0 apid 0
 cpu0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, id 0x306d4
 cpu1 at mainbus0 apid 1
 cpu1: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, id 0x306d4
 cpu2 at mainbus0 apid 2
 cpu2: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, id 0x306d4
 cpu3 at mainbus0 apid 3
 cpu3: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz, id 0x306d4
 acpi0 at mainbus0: Intel ACPICA 20160930
 acpi0: X/RSDT: OemId <TOSHIB,A0096   ,00000003>, AslId <    ,01000013>
 acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
 ACPI: Dynamic OEM Table Load:
 ACPI: SSDT 0xFFFFFE821F6DE008 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20130927)
 ACPI: Dynamic OEM Table Load:
 ACPI: SSDT 0xFFFFFE810E7AC808 0005AA (v02 PmRef  ApIst    00003000 INTL 20130927)
 ACPI: Dynamic OEM Table Load:
 ACPI: SSDT 0xFFFFFE810E6B31C8 000119 (v02 PmRef  ApCst    00003000 INTL 20130927)
 acpi0: SCI interrupting at int 9
 timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
 acpivga0 at acpi0 (GFX0): ACPI Display Adapter
 acpiout0 at acpivga0 (DDC1, 0x0400): ACPI Display Output Device
 acpiout0: brightness levels: [0-100]
 acpiout1 at acpivga0 (DDC2, 0x0300): ACPI Display Output Device
 acpiout2 at acpivga0 (DDC3, 0x0301): ACPI Display Output Device
 acpiout3 at acpivga0 (DDC4, 0x0302): ACPI Display Output Device
 acpiout4 at acpivga0 (DDC5, 0x0303): ACPI Display Output Device
 acpiout5 at acpivga0 (DDC6, 0x0006): ACPI Display Output Device
 acpiout6 at acpivga0 (DDC7, 0x0007): ACPI Display Output Device
 acpiout7 at acpivga0 (DDC8, 0x0008): ACPI Display Output Device
 acpiout8 at acpivga0 (DDC9, 0x0009): ACPI Display Output Device
 acpiout9 at acpivga0 (DDCA, 0x000a): ACPI Display Output Device
 acpiout10 at acpivga0 (DDCB, 0x000b): ACPI Display Output Device
 acpiout11 at acpivga0 (DDCC, 0x000c): ACPI Display Output Device
 acpiout12 at acpivga0 (DDCD, 0x000d): ACPI Display Output Device
 acpiout13 at acpivga0 (DDCE, 0x000e): ACPI Display Output Device
 acpiout14 at acpivga0 (DDCF, 0x000f): ACPI Display Output Device
 acpivga0: unknown output device acpiout5
 acpivga0: unknown output device acpiout6
 acpivga0: unknown output device acpiout7
 acpivga0: unknown output device acpiout8
 acpivga0: unknown output device acpiout9
 acpivga0: unknown output device acpiout10
 acpivga0: unknown output device acpiout11
 acpivga0: unknown output device acpiout12
 acpivga0: unknown output device acpiout13
 acpivga0: unknown output device acpiout14
 acpivga0: connected output devices:
 acpivga0:   0x0400 (acpiout0): Int. Digital Flat Panel, index 0, port 0, head 0
 acpivga0:   0x0300 (acpiout1): Ext. Digital Monitor, index 0, port 0, head 0, bios detect
 acpivga0:   0x0301 (acpiout2): Ext. Digital Monitor, index 1, port 0, head 0, bios detect
 acpivga0:   0x0302 (acpiout3): Ext. Digital Monitor, index 2, port 0, head 0, bios detect
 acpivga0:   0x0303 (acpiout4): Ext. Digital Monitor, index 3, port 0, head 0, bios detect
 PDRC (PNP0C02) at acpi0 not configured
 acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
 acpiwmibus at acpiwmi0 not configured
 GTPM (IFX0102) at acpi0 not configured
 LDRC (PNP0C02) at acpi0 not configured
 GEN1 (PNP0C02) at acpi0 not configured
 attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
 pckbc1 at acpi0 (PS2K, TOS7407) (kbd port): io 0x60,0x64 irq 1
 pckbc2 at acpi0 (PS2M, TTP1000) (aux port): irq 12
 SIRC (PNP0C02) at acpi0 not configured
 valz0 at acpi0 (VALZ, TOS6208): Toshiba VALZ
 BT (TOS6205) at acpi0 not configured
 acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
 acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
 acpitz0 at acpi0 (TZ01)
 acpitz0: levels: critical 107.0 C, passive cooling
 ACPI: Enabled 4 GPEs in block 00 to 7F
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc1 (aux slot)
 pckbc1: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1604 (rev. 0x09)
 i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 1616 (rev. 0x09)
 drm: Memory usable by graphics device = 4096M
 drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
 drm: Driver supports precise vblank timestamp query.
 i915drmkms0: interrupting at ioapic0 pin 16 (i915)
 intelfb0 at i915drmkms0
 i915drmkms0: info: registered panic notifier
 i915drmkms0: More than 8 outputs detected via ACPI
 intelfb0: framebuffer at 0xffff80008ed7c000, size 1920x1080, depth 32, stride 7680
 wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
 hdaudio0: interrupting at msi0 vec 0
 hdaudio0: timeout leaving reset state
 hdaudio0: device driver failed to attach
 xhci0 at pci0 dev 20 function 0: vendor 8086 product 9cb1 (rev. 0x03)
 xhci0: interrupting at msi0 vec 0
 xhci0: xHCI version 1.0
 usb0 at xhci0: USB revision 3.0
 vendor 8086 product 9cba (miscellaneous communications, revision 0x03) at pci0 dev 22 function 0 not configured
 wm0 at pci0 dev 25 function 0: I218 V Ethernet Connection (rev. 0x03)
 wm0: interrupting at msi1 vec 0
 wm0: PCI-Express bus
 wm0: 2048 words FLASH
 wm0: Ethernet address b8:6b:23:86:df:bb
 ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 5
 ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
 hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
 hdaudio1: interrupting at msi2 vec 0
 hdafg0 at hdaudio1: vendor 10ec product 0255
 hdafg0: DAC00 2ch: Speaker [Built-In]
 hdafg0: DAC01 2ch: HP Out [Jack]
 hdafg0: ADC02 2ch: Mic In [Jack]
 hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
 audio0 at hdafg0: full duplex, playback, capture, mmap, independent
 spkr0 at audio0: PC Speaker (synthesized)
 ppb0 at pci0 dev 28 function 0: vendor 8086 product 9c9a (rev. 0xe3)
 ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
 ppb0: link is x1 @ 2.5GT/s
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 rtsx0 at pci1 dev 0 function 0: vendor 10ec product 5227 (rev. 0x01)
 rtsx0: interrupting at msi3 vec 0
 sdmmc0 at rtsx0
 ppb1 at pci0 dev 28 function 2: vendor 8086 product 9c94 (rev. 0xe3)
 ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
 ppb1: link is x1 @ 2.5GT/s
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 iwm0 at pci2 dev 0 function 0: vendor 8086 product 095a (rev. 0x59)
 iwm0: interrupting at msi4 vec 0
 ehci0 at pci0 dev 29 function 0: vendor 8086 product 9ca6 (rev. 0x03)
 ehci0: interrupting at ioapic0 pin 23
 ehci0: EHCI version 1.0
 usb1 at ehci0: USB revision 2.0
 pcib0 at pci0 dev 31 function 0: vendor 8086 product 9cc3 (rev. 0x03)
 ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 9c83 (rev. 0x03)
 ahcisata0: interrupting at ioapic0 pin 19
 ahcisata0: 64-bit DMA
 ahcisata0: AHCI revision 1.30, 3 ports, 32 slots, CAP 0xcf34ff02<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SNCQ,S64A>
 atabus0 at ahcisata0 channel 0
 isa0 at pcib0
 tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x001a15d1 rev 0x10
 pcppi0 at isa0 port 0x61
 spkr1 at pcppi0: PC Speaker
 midi0 at pcppi0: PC speaker
 sysbeep0 at pcppi0
 attimer1: attached to pcppi0
 acpicpu0 at cpu0: ACPI CPU
 acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
 acpicpu0: C2: FFH, lat 148 us, pow   200 mW
 acpicpu0: C3: FFH, lat 233 us, pow   200 mW
 acpicpu0: P0: FFH, lat  10 us, pow 15000 mW, 2401 MHz, turbo boost
 acpicpu0: P1: FFH, lat  10 us, pow 15000 mW, 2400 MHz
 acpicpu0: P2: FFH, lat  10 us, pow 14088 mW, 2300 MHz
 acpicpu0: P3: FFH, lat  10 us, pow 12607 mW, 2100 MHz
 acpicpu0: P4: FFH, lat  10 us, pow 11888 mW, 2000 MHz
 acpicpu0: P5: FFH, lat  10 us, pow 11184 mW, 1900 MHz
 acpicpu0: P6: FFH, lat  10 us, pow  9680 mW, 1700 MHz
 acpicpu0: P7: FFH, lat  10 us, pow  9019 mW, 1600 MHz
 acpicpu0: P8: FFH, lat  10 us, pow  7738 mW, 1400 MHz
 acpicpu0: P9: FFH, lat  10 us, pow  7119 mW, 1300 MHz
 acpicpu0: P10: FFH, lat  10 us, pow  6511 mW, 1200 MHz
 acpicpu0: P11: FFH, lat  10 us, pow  5209 mW, 1000 MHz
 acpicpu0: P12: FFH, lat  10 us, pow  4643 mW,  900 MHz
 acpicpu0: P13: FFH, lat  10 us, pow  4090 mW,  800 MHz
 acpicpu0: P14: FFH, lat  10 us, pow  3021 mW,  600 MHz
 acpicpu0: P15: FFH, lat  10 us, pow  2386 mW,  500 MHz
 acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
 acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
 acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
 acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
 acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
 acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
 acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
 acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
 coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
 acpicpu1 at cpu1: ACPI CPU
 acpicpu2 at cpu2: ACPI CPU
 coretemp1 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
 acpicpu3 at cpu3: ACPI CPU
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "TSC" frequency 2394635040 Hz quality 3000
 acpiacad0: AC adapter online.
 uhub0 at usb0: vendor 8086 xHCI Root Hub, class 9/0, rev 1.00/1.00, addr 0
 uhub0: 15 ports with 15 removable, self powered
 IPsec: Initialized Security Association Processing.
 uhub1 at usb1: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 ahcisata0 port 0: device present, speed: 6.0Gb/s
 wd0 at atabus0 drive 0
 wd0: <TOSHIBA THNSNJ256GMCU>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 uhub2 at uhub0 port 6: vendor 05e3 USB2.0 Hub, class 9/0, rev 2.10/88.30, addr 1
 uhub2: single transaction translator
 uhub2: 4 ports with 0 removable, self powered
 uhub3 at uhub1 port 1: vendor 8087 product 8001, class 9/0, rev 2.00/0.03, addr 2
 uhub3: single transaction translator
 uhub3: 8 ports with 8 removable, self powered
 uvideo0 at uhub0 port 7 configuration 1 interface 0: Chicony Electronics Co.,Ltd. TOSHIBA Web Camera - FHD, rev 2.00/83.73, addr 2
 video0 at uvideo0: Chicony Electronics Co.,Ltd. TOSHIBA Web Camera - FHD, rev 2.00/83.73, addr 2
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio1 at pad0: half duplex, playback, capture
 spkr2 at audio1: PC Speaker (synthesized)
 WARNING: 13 errors while detecting hardware; check system log.
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 kern.module.path=/stand/amd64/7.99.56/modules
 iwm0: hw rev 0x210, fw ver 16.242414.0, address 5c:e0:c5:a8:88:ab
 iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
 iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
 wsdisplay0: screen 1 added (default, vt100 emulation)
 wsdisplay0: screen 2 added (default, vt100 emulation)
 wsdisplay0: screen 3 added (default, vt100 emulation)
 wsdisplay0: screen 4 added (default, vt100 emulation)
 cpu 0: ucode 0x19->0x24
 cpu 2: ucode 0x19->0x24
 iwm0: fatal firmware error
 iwm0: device timeout
 iwm0: device timeout
 
 
 > Regards,
 > -- 
 > Kimihiro Nonaka
 
 --
 Ryo ONODERA // ryo_on%yk.rim.or.jp@localhost
 PGP fingerprint = 82A2 DC91 76E0 A10A 8ABB  FD1B F404 27FA C7D1 15F3