Re: install/54929 (NetBSD 9.0-RC2 fails to install with GPT partition on ASUS X202E laptop)

["Rajeev V. Pillai" <rajeev_v_pillai%yahoo.com@localhost>]

The following reply was made to PR install/54929; it has been noted by GNATS.

From: "Rajeev V. Pillai" <rajeev_v_pillai%yahoo.com@localhost>
To: <gnats-bugs%netbsd.org@localhost>
Cc: 
Subject: Re: install/54929 (NetBSD 9.0-RC2 fails to install with GPT
 partition on ASUS X202E laptop)
Date: Tue, 4 Feb 2020 08:18:52 +0000 (UTC)

 I forgot to mention that I installed from the NetBSD-9.0_RC2-amd64-uefi-ins=
 tall.img.
 
 Also, the linux kernel produces this message when you plug in the USB-stick=
  with the
  dd(1)'d image above:
 
 [ 1167.302352] usb 3-3: new high-speed USB device number 3 using xhci_hcd
 [ 1167.450867] usb 3-3: New USB device found, idVendor=3D0781, idProduct=3D=
 5567, bcdDevice=3D 1.27
 [ 1167.450874] usb 3-3: New USB device strings: Mfr=3D1, Product=3D2, Seria=
 lNumber=3D3
 [ 1167.450877] usb 3-3: Product: Cruzer Blade
 [ 1167.450880] usb 3-3: Manufacturer: SanDisk
 [ 1167.450883] usb 3-3: SerialNumber: 4C530301371123117230
 [ 1167.542951] usb-storage 3-3:1.0: USB Mass Storage device detected
 [ 1167.543321] scsi host6: usb-storage 3-3:1.0
 [ 1167.543711] usbcore: registered new interface driver usb-storage
 [ 1167.561066] usbcore: registered new interface driver uas
 [ 1168.563751] scsi 6:0:0:0: Direct-Access=C2=A0=C2=A0=C2=A0=C2=A0 SanDisk=
 =C2=A0 Cruzer Blade=C2=A0=C2=A0=C2=A0=C2=A0 1.27 PQ: 0 ANSI: 6
 [ 1168.565307] sd 6:0:0:0: Attached scsi generic sg1 type 0
 [ 1168.567131] sd 6:0:0:0: [sdb] 15330304 512-byte logical blocks: (7.85 GB=
 /7.31 GiB)
 [ 1168.568155] sd 6:0:0:0: [sdb] Write Protect is off
 [ 1168.568158] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
 [ 1168.568517] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled=
 , doesn't support DPO or FUA
 [ 1168.591914] GPT:Primary header thinks Alt. header is not at the end of t=
 he disk.
 [ 1168.591918] GPT:3174399 !=3D 15330303
 [ 1168.591919] GPT:Alternate GPT header not at the end of the disk.
 [ 1168.591920] GPT:3174399 !=3D 15330303
 [ 1168.591920] GPT: Use GNU Parted to correct GPT errors.
 [ 1168.591938]=C2=A0 sdb: sdb1 sdb2
 [ 1168.593307] sd 6:0:0:0: [sdb] Attached SCSI removable disk
 
 Does this have any bearing on issue: install/54929?