Re: port-evbarm/57135

To: port-evbarm-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,stadtkind2%gmx.de@localhost
Subject: Re: port-evbarm/57135
From: Stefan Krüger <stadtkind2%gmx.de@localhost>
Date: Tue, 27 Dec 2022 18:10:02 +0000 (UTC)
The following reply was made to PR port-evbarm/57135; it has been noted by GNATS.

From: Stefan =?iso-8859-1?Q?Kr=FCger?= <stadtkind2%gmx.de@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: port-evbarm/57135
Date: Tue, 27 Dec 2022 19:08:58 +0100

 Hi,
 
 thanks for your help Martin, but I'm still getting a kernel panic on boot =
 :(
 
 Here's the u-boot output you requested, notice that I have changed the u-b=
 oot
 env vars:
 
 ```
 U-Boot SPL 2018.11-00078-g0dd51748c2a (Dec 16 2018 - 18:35:18 +0100)
 PMIC:  PFUZE100 ID=3D0x10
 Normal Boot
 Trying to boot from MMC2
 NOTICE:  Configureing TZASC380
 NOTICE:  BL31: v1.6(release):v1.6-110-g0eb2df45
 NOTICE:  BL31: Built : 13:56:07, Nov 29 2018
 NOTICE:  sip svc init
 
 
 U-Boot 2018.11-00078-g0dd51748c2a (Dec 16 2018 - 18:35:18 +0100)
 
 CPU:   Freescale i.MX8MQ rev2.0 at 1000 MHz
 Reset cause: POR
 Model: SolidRun i.MX8MQ HummingBoard Pulse
 DRAM:  3 GiB
 MMC:   FSL_SDHC: 0, FSL_SDHC: 1
 Loading Environment from MMC... *** Warning - bad CRC, using default envir=
 onment
 
 In:    serial
 Out:   serial
 Err:   serial
 Net:
 Error: ethernet@30be0000 address not set.
 eth-1: ethernet@30be0000
 Hit any key to stop autoboot:  0
 Hit any key to stop autoboot:  0
 =3D> printenv efi_dtb_prefixes
 efi_dtb_prefixes=3D=3D /dtb/ /dtb/freescale/
 =3D> printenv fdt_file
 fdt_file=3D=3D imx8mq-hummingboard-pulse.dtb
 =3D> printenv fdtfile
 fdtfile=3D=3D imx8mq-hummingboard-pulse.dtb
 ```
 
 
 booting netbsd - starting in 0 seconds.
 8503536+3657568+4173152+1740184 [586815+1179216+706231]=3D0x15fff50
 [   1.0000000] NetBSD/evbarm (fdt) booting ...
 [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 200=
 3, 2004, 2005,
 [   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2=
 015, 2016, 2017,
 [   1.0000000]     2018, 2019, 2020, 2021, 2022
 [   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
 [   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [   1.0000000]     The Regents of the University of California.  All right=
 s reserved.
 
 [   1.0000000] NetBSD 10.0_BETA (GENERIC64) #0: Sat Dec 24 17:18:51 UTC 20=
 22
 [   1.0000000]  mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/evbarm/compil=
 e/GENERIC64
 [   1.0000000] total memory =3D 3051 MB
 [   1.0000000] avail memory =3D 2941 MB
 [   1.0000000] armfdt0 (root)
 [   1.0000000] simplebus0 at armfdt0: SolidRun i.MX8MQ HummingBoard Pulse
 [   1.0000000] cpus0 at simplebus0
 [   1.0000000] simplebus1 at simplebus0
 [   1.0000000] psci0 at simplebus0: PSCI 1.1
 [   1.0000000] simplebus2 at simplebus0
 [   1.0000000] cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0
 [   1.0000000] cpu0: package 0, core 0, smt 0
 [   1.0000000] cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1
 [   1.0000000] cpu1: package 0, core 1, smt 0
 [   1.0000000] cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2
 [   1.0000000] cpu2: package 0, core 2, smt 0
 [   1.0000000] cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3
 [   1.0000000] cpu3: package 0, core 3, smt 0
 [   1.0000000] gicvthree0 at simplebus0: GICv3
 [   1.0000000] syscon0 at simplebus0: System Controller Registers
 [   1.0000000] syscon1 at simplebus0: System Controller Registers
 [   1.0000000] syscon2 at simplebus0: System Controller Registers
 [   1.0000000] imx7gpc0 at simplebus0: General Power Controller
 [   1.0000000] imx8mqccm0 at simplebus0: Clock Control Module
 [   1.0000000] imxiomux0 at simplebus0: IOMUX Controller
 [   1.0000000] gtmr0 at simplebus0: Generic Timer
 [   1.0000000] gtmr0: interrupting on GICv3 irq 27
 [   1.0000000] armgtmr0 at gtmr0: Generic Timer (8333 kHz, virtual)
 [   1.0000040] imxgpio0 at simplebus0: GPIO (gpio@30210000)
 [   1.0000040] imxgpio0: interrupting on irq 98
 [   1.0000040] imxgpio0: interrupting on irq 99
 [   1.0000040] imxgpio0: interrupts 16384..16415
 [   1.0000040] gpio0 at imxgpio0: 32 pins
 [   1.0000040] imxgpio1 at simplebus0: GPIO (gpio@30200000)
 [   1.0000040] imxgpio1: interrupting on irq 96
 [   1.0000040] imxgpio1: interrupting on irq 97
 [   1.0000040] imxgpio1: interrupts 16416..16447
 [   1.0000040] gpio1 at imxgpio1: 32 pins
 [   1.0000040] imxgpio2 at simplebus0: GPIO (gpio@30220000)
 [   1.0000040] imxgpio2: interrupting on irq 100
 [   1.0000040] imxgpio2: interrupting on irq 101
 [   1.0000040] imxgpio2: interrupts 16448..16479
 [   1.0000040] gpio2 at imxgpio2: 32 pins
 [   1.0000040] imxgpio3 at simplebus0: GPIO (gpio@30230000)
 [   1.0000040] imxgpio3: interrupting on irq 102
 [   1.0000040] imxgpio3: interrupting on irq 103
 [   1.0000040] imxgpio3: interrupts 16480..16511
 [   1.0000040] gpio3 at imxgpio3: 32 pins
 [   1.0000040] imxgpio4 at simplebus0: GPIO (gpio@30240000)
 [   1.0000040] imxgpio4: interrupting on irq 104
 [   1.0000040] imxgpio4: interrupting on irq 105
 [   1.0000040] imxgpio4: interrupts 16512..16543
 [   1.0000040] gpio4 at imxgpio4: 32 pins
 [   1.0000040] fregulator0 at simplebus1: VSD_3V3
 [   1.0000040] imxuart0 at simplebus0
 [   1.0000040] imxuart0: interrupting on irq 58
 [   1.0000040] imxuart0: console
 [   1.0000040] imxuart1 at simplebus0
 [   1.0000040] imxuart1: interrupting on irq 59
 [   1.0000040] imxi2c0 at simplebus0: couldn't get clock
 [   1.0000040] imx8mqusbphy0 at simplebus0: couldn't enable phy clock
 [   1.0000040] imx8mqusbphy1 at simplebus0: couldn't enable phy clock
 [   1.0000040] /tmu@30260000 at simplebus0 not configured
 [   1.0000040] /sdma@30bd0000 at simplebus0 not configured
 [   1.0000040] /power-controller at simplebus0 not configured
 [   1.0000040] enet0 at simplebus0: couldn't get clock ipg
 [   1.0000040] panic: Trap: Data Abort (EL1): Translation Fault L0 with re=
 ad access for 0000000000000000: pc ffffc00000041970: ldr x0, [x3]
 
 [   1.0000040] cpu0: Begin traceback...
 [   1.0000040] trace fp ffffc00001202460
 [   1.0000040] fp ffffc00001202490 vpanic() at ffffc00000585c38 netbsd:vpa=
 nic+0x178
 [   1.0000040] fp ffffc000012024f0 panic() at ffffc00000585d44 netbsd:pani=
 c+0x44
 [   1.0000040] fp ffffc00001202580 data_abort_handler() at ffffc000000b575=
 c netbsd:data_abort_handler+0x1ec
 [   1.0000040] tf ffffc000012025f0 el1_trap() at ffffc000000b6f84 netbsd:e=
 l1_vectors+0x784
 [   1.0000040] ---- Data Abort (EL1): trapframe 0xffffc000012025f0 (304 by=
 tes) ----
 [   1.0000040]     pc=3Dffffc00000041970,   spsr=3D0000000060000005
 [   1.0000040]    esr=3D0000000096000004,    far=3D0000000000000000
 [   1.0000040]     x0=3D0000000000000001,     x1=3D0000000000000000
 [   1.0000040]     x2=3D0000000000010000,     x3=3D0000000000000000
 [   1.0000040]     x4=3D0000000000000003,     x5=3Dffffc000000a7d50
 [   1.0000040]     x6=3Dffffc000012028e0,     x7=3D00000000ffffffc8
 [   1.0000040]     x8=3D0000000000000040,     x9=3D00000000ffffffe0
 [   1.0000040]    x10=3Dffffc00000b45578,    x11=3D000000000000205c
 [   1.0000040]    x12=3D0000000000000000,    x13=3Dffffc00001254c00
 [   1.0000040]    x14=3D7f60a6a88f2887c6,    x15=3Dffff0000fea77510
 [   1.0000040]    x16=3Dffffc0000003e320,    x17=3D6b835147320ef878
 [   1.0000040]    x18=3D3e194a58448e1f17,    x19=3Dffffc00040012000
 [   1.0000040]    x20=3Dffff0000fe9e4400,    x21=3Dffffc00001202ac0
 [   1.0000040]    x22=3D00000000000031f8,    x23=3Dffff0000fea8f540
 [   1.0000040]    x24=3Dffff0000fed14400,    x25=3Dffffc00000f4c980
 [   1.0000040]    x26=3D0000000000000001,    x27=3Dffffc00000c18a68
 [   1.0000040]    x28=3D00000000fe546a10, fp=3Dx29=3Dffffc00001202920
 [   1.0000040] lr=3Dx30=3Dffffc0000004199c,     sp=3Dffffc00001202920
 [   1.0000040] ------------------------------------------------
 [   1.0000040] fp ffffc00001202920 enet_attach() at ffffc00000041970 netbs=
 d:enet_attach+0x320
 [   1.0000040] fp ffffc00001202980 config_attach_internal() at ffffc000005=
 6577c netbsd:config_attach_internal+0x1b8
 [   1.0000040] fp ffffc000012029e0 config_found() at ffffc000005659d8 netb=
 sd:config_found+0xd8
 [   1.0000040] fp ffffc00001202a50 fdt_scan() at ffffc0000069a590 netbsd:f=
 dt_scan+0x250
 [   1.0000040] fp ffffc00001202be0 fdt_rescan() at ffffc0000069a9c0 netbsd=
 :fdt_rescan+0x50
 [   1.0000040] fp ffffc00001202c10 config_attach_internal() at ffffc000005=
 6577c netbsd:config_attach_internal+0x1b8
 [   1.0000040] fp ffffc00001202c70 config_found() at ffffc000005659d8 netb=
 sd:config_found+0xd8
 [   1.0000040] fp ffffc00001202ce0 arm_fdt_attach() at ffffc00000072c08 ne=
 tbsd:arm_fdt_attach+0x94
 [   1.0000040] fp ffffc00001202d40 config_attach_internal() at ffffc000005=
 6577c netbsd:config_attach_internal+0x1b8
 [   1.0000040] fp ffffc00001202da0 config_rootfound() at ffffc00000565ba4 =
 netbsd:config_rootfound+0x64
 [   1.0000040] fp ffffc00001202e00 cpu_configure() at ffffc0000006e6ec net=
 bsd:cpu_configure+0x4c
 [   1.0000040] fp ffffc00001202e30 main() at ffffc0000081bb64 netbsd:main+=
 0x2d4
 [   1.0000040] fp 0000000000000000 aarch64_start() at ffffc0000000189c net=
 bsd:aarch64_start+0x109c
 [   1.0000040] cpu0: End traceback...
 Stopped in pid 0.0 (system) at  netbsd:cpu_Debugger+0xc:        ldp     x2=
 9, x30
 , [sp],#16
 db{0}>
 ```
Follow-Ups:
- re: port-evbarm/57135
  - From: matthew green
Prev by Date: PR/57132 CVS commit: src/usr.sbin/sysinst
Next by Date: re: port-evbarm/57135
Previous by Thread: PR/57132 CVS commit: src/usr.sbin/sysinst
Next by Thread: re: port-evbarm/57135
Indexes:
Home | Main Index | Thread Index | Old Index