NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
port-amd64/57143: Screen rotation causes loss of acceleration on i915
>Number: 57143
>Category: port-amd64
>Synopsis: Screen rotation causes loss of acceleration on i915
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: port-amd64-maintainer
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Thu Dec 29 04:20:00 +0000 2022
>Originator: Mayuresh
>Release: NetBSD 10.0_BETA (GENERIC) #0: Mon Dec 26 11:25:01 UTC 2022
>Organization:
>Environment:
NetBSD asus2n 10.0_BETA NetBSD 10.0_BETA (GENERIC) #0: Mon Dec 26 11:25:01 UTC 2022 mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC amd64
>Description:
If I rotate the x11 screen (either eDP1 or HDMI1) using e.g.
xrandr --output HDMI1 --rotate left # Equally applies to eDP1 screen as well
it leads to slow refresh, even on simple client like xterm. E.g. if I open vi, I can see ~ character appearing line by line.
In the default orientation the screen works fine, simple videos play fine.
Only intel driver is seen working with UXA acceleration. SNA/None do not work. Other drivers such as modesetting, wsfb do not work.
On Linux X11 uses intel driver with SNA acceleration and it doesn't have this issue.
xorg.conf
---------
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/pkg/lib/xorg/modules"
FontPath "/usr/pkg/share/fonts/X11/misc"
FontPath "/usr/pkg/share/fonts/X11/TTF"
FontPath "/usr/pkg/share/fonts/X11/OTF"
FontPath "/usr/pkg/share/fonts/X11/Type1"
FontPath "/usr/pkg/share/fonts/X11/100dpi"
FontPath "/usr/pkg/share/fonts/X11/75dpi"
FontPath "/usr/pkg/share/fonts/X11/cyrillic"
FontPath "/usr/pkg/lib/X11/fonts/misc"
FontPath "/usr/pkg/lib/X11/fonts/TTF"
FontPath "/usr/pkg/lib/X11/fonts/OTF"
FontPath "/usr/pkg/lib/X11/fonts/Type1"
FontPath "/usr/pkg/lib/X11/fonts/100dpi"
FontPath "/usr/pkg/lib/X11/fonts/75dpi"
FontPath "/usr/pkg/lib/X11/fonts/cyrillic"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor-eDP1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor-HDMI1"
EndSection
Section "Device"
Identifier "Card0"
Option "AccelMethod" "UXA"
Driver "intel"
BusID "PCI:0:2:0"
Option "Monitor-eDP1" "Monitor-eDP1"
Option "Monitor-HDMI1" "Monitor-HDMI1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg.log on NetBSD
-------------------
[ 31.235] (==) intel(0): Default visual is TrueColor
[ 31.235] (**) intel(0): Option "AccelMethod" "UXA"
[ 31.235] (--) intel(0): gen9 engineering sample
[ 31.236] (**) intel(0): Relaxed fencing enabled
[ 31.236] (**) intel(0): Wait on SwapBuffers? enabled
[ 31.236] (**) intel(0): Triple buffering? enabled
[ 31.236] (**) intel(0): Framebuffer tiled
[ 31.236] (**) intel(0): Pixmaps tiled
[ 31.236] (**) intel(0): 3D buffers tiled
[ 31.236] (**) intel(0): SwapBuffers wait enabled
[ 31.236] (==) intel(0): video overlay key set to 0x101fe
[ 31.257] (II) intel(0): Output eDP1 using monitor section Monitor0
[ 31.260] (II) intel(0): Output HDMI1 has no monitor section
[ 31.281] (II) intel(0): EDID for output eDP1
[ 31.281] (II) intel(0): Manufacturer: CMN Model: 15db Serial#: 0
[ 31.281] (II) intel(0): Year: 2020 Week: 34
[ 31.281] (II) intel(0): EDID Version: 1.4
[ 31.281] (II) intel(0): Digital Display Input
[ 31.281] (II) intel(0): 6 bits per channel
[ 31.281] (II) intel(0): Digital interface is DisplayPort
[ 31.281] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 31.281] (II) intel(0): Gamma: 2.20
[ 31.281] (II) intel(0): No DPMS capabilities specified
[ 31.281] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 31.281] (II) intel(0): First detailed timing is preferred mode
[ 31.281] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 31.281] (II) intel(0): redX: 0.569 redY: 0.332 greenX: 0.328 greenY: 0.581
[ 31.281] (II) intel(0): blueX: 0.163 blueY: 0.147 whiteX: 0.313 whiteY: 0.329
[ 31.281] (II) intel(0): Manufacturer's mask: 0
[ 31.281] (II) intel(0): Supported detailed timing:
[ 31.281] (II) intel(0): clock: 76.4 MHz Image Size: 344 x 193 mm
[ 31.281] (II) intel(0): h_active: 1366 h_sync: 1434 h_sync_end 1479 h_blank_end 1592 h_border: 0
[ 31.281] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 779 v_blanking: 800 v_border: 0
[ 31.281] (II) intel(0): N156BGA-EA2
[ 31.281] (II) intel(0): CMN
[ 31.281] (II) intel(0): N156BGA-EA2
[ 31.281] (II) intel(0): EDID (in hex):
[ 31.281] (II) intel(0): 00ffffffffffff000daedb1500000000
[ 31.281] (II) intel(0): 221e01049522137802c3f59155549429
[ 31.281] (II) intel(0): 25505400000001010101010101010101
[ 31.281] (II) intel(0): 010101010101da1d56e250002030442d
[ 31.281] (II) intel(0): 470058c110000018000000fe004e3135
[ 31.281] (II) intel(0): 364247412d4541320a20000000fe0043
[ 31.281] (II) intel(0): 4d4e0a202020202020202020000000fe
[ 31.281] (II) intel(0): 004e3135364247412d4541320a2000fa
[ 31.282] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "320x180" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "320x180" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "360x202" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "360x202" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "432x243" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "432x243" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "480x270" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "480x270" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "512x288" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "512x288" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "640x360" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "640x360" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "684x384" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "684x384" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "800x450" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "800x450" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "1024x576" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "1024x576" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "1280x720" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "1280x720" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "640x400" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "640x400" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "700x450" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "700x450" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 31.282] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 31.282] (II) intel(0): Printing probed modes for output eDP1
[ 31.282] (II) intel(0): Modeline "1366x768"x60.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 31.282] (II) intel(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 31.282] (II) intel(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 31.282] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 31.282] (II) intel(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 31.282] (II) intel(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 31.282] (II) intel(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 31.282] (II) intel(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 31.282] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 31.282] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 31.282] (II) intel(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 31.282] (II) intel(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 31.283] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 31.283] (II) intel(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 31.283] (II) intel(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 31.283] (II) intel(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 31.283] (II) intel(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 31.285] (II) intel(0): EDID for output HDMI1
[ 31.285] (II) intel(0): Output eDP1 connected
[ 31.286] (II) intel(0): Output HDMI1 disconnected
[ 31.286] (II) intel(0): Using exact sizes for initial modes
[ 31.286] (II) intel(0): Output eDP1 using initial mode 1366x768 +0+0
[ 31.286] (II) intel(0): Kernel page flipping support detected, enabling
[ 31.286] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 31.286] (==) intel(0): DPI set to (96, 96)
[ 31.286] (II) Loading sub module "fb"
[ 31.286] (II) LoadModule: "fb"
[ 31.286] (II) Module "fb" already built-in
[ 31.286] (II) Loading sub module "dri2"
[ 31.286] (II) LoadModule: "dri2"
[ 31.286] (II) Module "dri2" already built-in
[ 31.286] (II) intel(0): Allocated new frame buffer 1366x768 stride 5632, tiled
[ 31.287] (II) UXA(0): Driver registered support for the following operations:
[ 31.287] (II) solid
[ 31.287] (II) copy
[ 31.287] (II) put_image
[ 31.287] (II) get_image
[ 31.288] (II) intel(0): [DRI2] Setup complete
[ 31.288] (II) intel(0): [DRI2] DRI driver: i965
[ 31.288] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 31.288] (==) intel(0): Backing store enabled
[ 31.288] (==) intel(0): Silken mouse enabled
[ 31.288] (II) intel(0): Initializing HW Cursor
[ 31.289] (==) intel(0): DPMS enabled
[ 31.289] (==) intel(0): Intel XvMC decoder enabled
[ 31.289] (WW) intel(0): Disabling Xv because no adaptors could be initialized.
[ 31.289] (II) intel(0): DRI2: Enabled
[ 31.289] (II) intel(0): DRI3: Disabled
[ 31.311] (II) Initializing extension Generic Event Extension
[ 31.311] (II) Initializing extension SHAPE
[ 31.311] (II) Initializing extension MIT-SHM
[ 31.311] (II) Initializing extension XInputExtension
[ 31.311] (II) Initializing extension XTEST
[ 31.311] (II) Initializing extension BIG-REQUESTS
[ 31.311] (II) Initializing extension SYNC
[ 31.311] (II) Initializing extension XKEYBOARD
[ 31.311] (II) Initializing extension XC-MISC
[ 31.311] (II) Initializing extension XFIXES
[ 31.311] (II) Initializing extension RENDER
[ 31.311] (II) Initializing extension RANDR
[ 31.311] (II) Initializing extension COMPOSITE
[ 31.311] (II) Initializing extension DAMAGE
[ 31.311] (II) Initializing extension MIT-SCREEN-SAVER
[ 31.312] (II) Initializing extension DOUBLE-BUFFER
[ 31.312] (II) Initializing extension RECORD
[ 31.312] (II) Initializing extension DPMS
[ 31.312] (II) Initializing extension Present
[ 31.312] (II) Initializing extension DRI3
[ 31.312] (II) Initializing extension X-Resource
[ 31.312] (II) Initializing extension XVideo
[ 31.312] (II) Initializing extension XVideo-MotionCompensation
[ 31.312] (II) Initializing extension GLX
[ 31.751] (II) AIGLX: Loaded and initialized i965
[ 31.751] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 31.751] (II) Initializing extension XFree86-VidModeExtension
[ 31.751] (II) Initializing extension XFree86-DGA
[ 31.751] (II) Initializing extension XFree86-DRI
[ 31.752] (II) Initializing extension DRI2
[ 31.752] (II) intel(0): Setting screen physical size to 361 x 203
[ 32.474] (II) Using input driver 'mouse' for 'Mouse0'
[ 32.474] (**) Option "CorePointer"
[ 32.474] (**) Mouse0: always reports core events
[ 32.474] (**) Option "Protocol" "wsmouse"
[ 32.474] (**) Option "Device" "/dev/wsmouse"
[ 32.474] (**) Mouse0: Protocol: "wsmouse"
[ 32.474] (**) Mouse0: always reports core events
[ 32.477] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 32.477] (**) Option "ZAxisMapping" "4 5 6 7"
[ 32.477] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 32.477] (**) Mouse0: Buttons: 11
[ 32.477] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6)
[ 32.477] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 32.477] (**) Mouse0: (accel) acceleration profile 0
[ 32.477] (**) Mouse0: (accel) acceleration factor: 2.000
[ 32.477] (**) Mouse0: (accel) acceleration threshold: 4
[ 32.480] (II) Using input driver 'kbd' for 'Keyboard0'
[ 32.480] (**) Option "CoreKeyboard"
[ 32.480] (**) Keyboard0: always reports core events
[ 32.480] (**) Keyboard0: always reports core events
[ 32.480] (**) Option "Protocol" "standard"
[ 32.480] (**) Option "XkbRules" "base"
[ 32.480] (**) Option "XkbModel" "pc105"
[ 32.480] (**) Option "XkbLayout" "us"
[ 32.480] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 7)
[ 32.679] (II) intel(0): EDID vendor "CMN", prod id 5595
[ 32.679] (II) intel(0): Printing DDC gathered Modelines:
[ 32.679] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 32.914] (II) intel(0): EDID vendor "CMN", prod id 5595
[ 32.914] (II) intel(0): Printing DDC gathered Modelines:
[ 32.914] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
Xorg log on Linux
-----------------
[ 120.150]
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[ 120.152] Current Operating System: Linux asus2 6.0.10_1 #1 SMP PREEMPT_DYNAMIC Mon Nov 28 03:42:58 UTC 2022 x86_64
[ 120.152] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.10_1 root=UUID=4147e9fb-400b-449c-a1b0-a64b6b720900 ro loglevel=4
[ 120.153]
[ 120.154] Current version of pixman: 0.40.0
[ 120.156] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 120.156] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 120.159] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Dec 28 20:55:08 2022
[ 120.180] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 120.181] (==) No Layout section. Using the first Screen section.
[ 120.181] (==) No screen section available. Using defaults.
[ 120.181] (**) |-->Screen "Default Screen Section" (0)
[ 120.181] (**) | |-->Monitor "<default monitor>"
[ 120.181] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 120.181] (==) Automatically adding devices
[ 120.181] (==) Automatically enabling devices
[ 120.181] (==) Automatically adding GPU devices
[ 120.181] (==) Automatically binding GPU devices
[ 120.181] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 120.181] (WW) The directory "/usr/share/fonts/X11/OTF" does not exist.
[ 120.181] Entry deleted from font path.
[ 120.181] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/TTF,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi
[ 120.181] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 120.181] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 120.181] (II) Module ABI versions:
[ 120.181] X.Org ANSI C Emulation: 0.4
[ 120.181] X.Org Video Driver: 25.2
[ 120.181] X.Org XInput driver : 24.4
[ 120.181] X.Org Server Extension : 10.0
[ 120.181] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 120.181] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 120.192] (--) PCI:*(0@0:2:0) 8086:3184:1043:1232 rev 6, Mem @ 0xa0000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 120.192] (II) Open ACPI successful (/var/run/acpid.socket)
[ 120.192] (II) LoadModule: "glx"
[ 120.192] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 120.269] (II) Module glx: vendor="X.Org Foundation"
[ 120.269] compiled for 1.21.1.4, module version = 1.0.0
[ 120.269] ABI class: X.Org Server Extension, version 10.0
[ 120.269] (==) Matched intel as autoconfigured driver 0
[ 120.270] (==) Matched modesetting as autoconfigured driver 1
[ 120.270] (==) Matched fbdev as autoconfigured driver 2
[ 120.270] (==) Matched vesa as autoconfigured driver 3
[ 120.270] (==) Assigned the driver to the xf86ConfigLayout
[ 120.270] (II) LoadModule: "intel"
[ 120.270] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 120.271] (II) Module intel: vendor="X.Org Foundation"
[ 120.271] compiled for 1.21.1.3, module version = 2.99.917
[ 120.271] Module class: X.Org Video Driver
[ 120.271] ABI class: X.Org Video Driver, version 25.2
[ 120.271] (II) LoadModule: "modesetting"
[ 120.272] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 120.273] (II) Module modesetting: vendor="X.Org Foundation"
[ 120.273] compiled for 1.21.1.4, module version = 1.21.1
[ 120.274] Module class: X.Org Video Driver
[ 120.274] ABI class: X.Org Video Driver, version 25.2
[ 120.274] (II) LoadModule: "fbdev"
[ 120.274] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 120.274] (II) Module fbdev: vendor="X.Org Foundation"
[ 120.274] compiled for 1.21.1.3, module version = 0.5.0
[ 120.274] Module class: X.Org Video Driver
[ 120.274] ABI class: X.Org Video Driver, version 25.2
[ 120.274] (II) LoadModule: "vesa"
[ 120.275] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 120.275] (II) Module vesa: vendor="X.Org Foundation"
[ 120.275] compiled for 1.21.1.3, module version = 2.5.0
[ 120.275] Module class: X.Org Video Driver
[ 120.275] ABI class: X.Org Video Driver, version 25.2
[ 120.275] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 120.276] (II) intel: Driver for Intel(R) HD Graphics
[ 120.276] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 120.276] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 120.276] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 120.276] (II) FBDEV: driver for framebuffer: fbdev
[ 120.277] (II) VESA: driver for VESA chipsets: vesa
[ 120.277] (++) using VT number 1
[ 120.277] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 120.278] (WW) Falling back to old probe method for modesetting
[ 120.278] (WW) Falling back to old probe method for fbdev
[ 120.278] (II) Loading sub module "fbdevhw"
[ 120.278] (II) LoadModule: "fbdevhw"
[ 120.279] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 120.292] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 120.292] compiled for 1.21.1.4, module version = 0.0.2
[ 120.292] ABI class: X.Org Video Driver, version 25.2
[ 120.305] (--) intel(0): gen9 engineering sample
[ 120.305] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 4 threads
[ 120.305] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 120.305] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 120.305] (==) intel(0): RGB weight 888
[ 120.305] (==) intel(0): Default visual is TrueColor
[ 120.307] (II) intel(0): Output eDP1 has no monitor section
[ 120.307] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 120.307] (II) intel(0): Enabled output eDP1
[ 120.307] (II) intel(0): Output HDMI1 has no monitor section
[ 120.308] (II) intel(0): Enabled output HDMI1
[ 120.308] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 120.308] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 120.308] (II) intel(0): Enabled output VIRTUAL1
[ 120.308] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[ 120.313] (==) intel(0): TearFree enabled
[ 120.313] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 120.313] (==) intel(0): DPI set to (96, 96)
[ 120.313] (II) Loading sub module "dri3"
[ 120.313] (II) LoadModule: "dri3"
[ 120.313] (II) Module "dri3" already built-in
[ 120.314] (II) Loading sub module "dri2"
[ 120.314] (II) LoadModule: "dri2"
[ 120.314] (II) Module "dri2" already built-in
[ 120.314] (II) Loading sub module "present"
[ 120.314] (II) LoadModule: "present"
[ 120.314] (II) Module "present" already built-in
[ 120.314] (II) UnloadModule: "modesetting"
[ 120.314] (II) Unloading modesetting
[ 120.314] (II) UnloadModule: "fbdev"
[ 120.314] (II) Unloading fbdev
[ 120.314] (II) UnloadSubModule: "fbdevhw"
[ 120.314] (II) Unloading fbdevhw
[ 120.314] (II) UnloadModule: "vesa"
[ 120.314] (II) Unloading vesa
[ 120.324] (II) intel(0): SNA initialized with Geminilake (gen9) backend
[ 120.324] (==) intel(0): Backing store enabled
[ 120.324] (==) intel(0): Silken mouse enabled
[ 120.324] (II) intel(0): HW Cursor enabled
[ 120.324] (==) intel(0): DPMS enabled
[ 120.324] (==) intel(0): Display hotplug detection enabled
[ 120.325] (II) intel(0): [DRI2] Setup complete
[ 120.325] (II) intel(0): [DRI2] DRI driver: i965
[ 120.325] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 120.325] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 120.325] (II) intel(0): hardware support for Present enabled
[ 120.325] (II) Initializing extension Generic Event Extension
[ 120.325] (II) Initializing extension SHAPE
[ 120.325] (II) Initializing extension MIT-SHM
[ 120.325] (II) Initializing extension XInputExtension
[ 120.326] (II) Initializing extension XTEST
[ 120.326] (II) Initializing extension BIG-REQUESTS
[ 120.326] (II) Initializing extension SYNC
[ 120.326] (II) Initializing extension XKEYBOARD
[ 120.326] (II) Initializing extension XC-MISC
[ 120.326] (II) Initializing extension SECURITY
[ 120.326] (II) Initializing extension XFIXES
[ 120.326] (II) Initializing extension RENDER
[ 120.327] (II) Initializing extension RANDR
[ 120.327] (II) Initializing extension COMPOSITE
[ 120.327] (II) Initializing extension DAMAGE
[ 120.327] (II) Initializing extension MIT-SCREEN-SAVER
[ 120.327] (II) Initializing extension DOUBLE-BUFFER
[ 120.327] (II) Initializing extension RECORD
[ 120.327] (II) Initializing extension DPMS
[ 120.328] (II) Initializing extension Present
[ 120.328] (II) Initializing extension DRI3
[ 120.328] (II) Initializing extension X-Resource
[ 120.328] (II) Initializing extension XVideo
[ 120.328] (II) Initializing extension XVideo-MotionCompensation
[ 120.328] (II) Initializing extension GLX
[ 120.329] (EE) AIGLX error: dlopen of /usr/lib64/dri/i965_dri.so failed (/usr/lib64/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[ 120.329] (EE) AIGLX error: unable to load driver i965
[ 120.950] (II) IGLX: Loaded and initialized swrast
[ 120.950] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 120.950] (II) Initializing extension XFree86-VidModeExtension
[ 120.950] (II) Initializing extension XFree86-DGA
[ 120.950] (II) Initializing extension XFree86-DRI
[ 120.950] (II) Initializing extension DRI2
[ 120.966] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 120.972] (II) intel(0): Setting screen physical size to 361 x 203
[ 121.374] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event6)
[ 121.374] (**) Asus Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[ 121.374] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 121.374] (II) LoadModule: "libinput"
[ 121.374] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 121.426] (II) Module libinput: vendor="X.Org Foundation"
[ 121.426] compiled for 1.21.1.3, module version = 1.2.1
[ 121.426] Module class: X.Org XInput Driver
[ 121.426] ABI class: X.Org XInput driver, version 24.4
[ 121.426] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[ 121.426] (**) Asus Wireless Radio Control: always reports core events
[ 121.426] (**) Option "Device" "/dev/input/event6"
[ 121.451] (II) event6 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 121.451] (II) event6 - Asus Wireless Radio Control: device is a keyboard
[ 121.451] (II) event6 - Asus Wireless Radio Control: device removed
[ 121.466] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input6/event6"
[ 121.466] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 6)
[ 121.467] (II) event6 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 121.467] (II) event6 - Asus Wireless Radio Control: device is a keyboard
[ 121.467] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 121.467] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 121.467] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 121.467] (II) Using input driver 'libinput' for 'Video Bus'
[ 121.467] (**) Video Bus: always reports core events
[ 121.468] (**) Option "Device" "/dev/input/event5"
[ 121.468] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 121.468] (II) event5 - Video Bus: device is a keyboard
[ 121.468] (II) event5 - Video Bus: device removed
[ 121.476] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[ 121.476] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 121.477] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 121.477] (II) event5 - Video Bus: device is a keyboard
[ 121.477] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 121.478] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 121.478] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 121.478] (II) Using input driver 'libinput' for 'Power Button'
[ 121.478] (**) Power Button: always reports core events
[ 121.478] (**) Option "Device" "/dev/input/event1"
[ 121.478] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 121.478] (II) event1 - Power Button: device is a keyboard
[ 121.479] (II) event1 - Power Button: device removed
[ 121.492] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/PNP0C09:01/PNP0C0C:00/input/input1/event1"
[ 121.492] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 121.493] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 121.493] (II) event1 - Power Button: device is a keyboard
[ 121.494] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 121.494] (II) No input driver specified, ignoring this device.
[ 121.494] (II) This device may have been added with another device file.
[ 121.494] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 121.494] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 121.494] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 121.494] (II) Using input driver 'libinput' for 'Power Button'
[ 121.494] (**) Power Button: always reports core events
[ 121.494] (**) Option "Device" "/dev/input/event4"
[ 121.494] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 121.495] (II) event4 - Power Button: device is a keyboard
[ 121.495] (II) event4 - Power Button: device removed
[ 121.506] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:01/input/input4/event4"
[ 121.506] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 121.507] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 121.507] (II) event4 - Power Button: device is a keyboard
[ 121.507] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 121.507] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 121.507] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 121.507] (II) Using input driver 'libinput' for 'Sleep Button'
[ 121.507] (**) Sleep Button: always reports core events
[ 121.507] (**) Option "Device" "/dev/input/event3"
[ 121.508] (II) event3 - Sleep Button: is tagged by udev as: Keyboard
[ 121.508] (II) event3 - Sleep Button: device is a keyboard
[ 121.508] (II) event3 - Sleep Button: device removed
[ 121.516] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[ 121.516] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 121.517] (II) event3 - Sleep Button: is tagged by udev as: Keyboard
[ 121.517] (II) event3 - Sleep Button: device is a keyboard
[ 121.518] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 121.518] (II) No input driver specified, ignoring this device.
[ 121.518] (II) This device may have been added with another device file.
[ 121.518] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[ 121.518] (II) No input driver specified, ignoring this device.
[ 121.518] (II) This device may have been added with another device file.
[ 121.518] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[ 121.518] (II) No input driver specified, ignoring this device.
[ 121.518] (II) This device may have been added with another device file.
[ 121.518] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event13)
[ 121.518] (II) No input driver specified, ignoring this device.
[ 121.518] (II) This device may have been added with another device file.
[ 121.519] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event14)
[ 121.519] (II) No input driver specified, ignoring this device.
[ 121.519] (II) This device may have been added with another device file.
[ 121.519] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[ 121.519] (II) No input driver specified, ignoring this device.
[ 121.519] (II) This device may have been added with another device file.
[ 121.519] (II) config/udev: Adding input device USB2.0 VGA UVC WebCam: USB2.0 V (/dev/input/event15)
[ 121.519] (**) USB2.0 VGA UVC WebCam: USB2.0 V: Applying InputClass "evdev keyboard catchall"
[ 121.519] (**) USB2.0 VGA UVC WebCam: USB2.0 V: Applying InputClass "libinput keyboard catchall"
[ 121.519] (II) Using input driver 'libinput' for 'USB2.0 VGA UVC WebCam: USB2.0 V'
[ 121.519] (**) USB2.0 VGA UVC WebCam: USB2.0 V: always reports core events
[ 121.519] (**) Option "Device" "/dev/input/event15"
[ 121.520] (II) event15 - USB2.0 VGA UVC WebCam: USB2.0 V: is tagged by udev as: Keyboard
[ 121.520] (II) event15 - USB2.0 VGA UVC WebCam: USB2.0 V: device is a keyboard
[ 121.520] (II) event15 - USB2.0 VGA UVC WebCam: USB2.0 V: device removed
[ 121.538] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/usb1/1-5/1-5:1.0/input/input15/event15"
[ 121.538] (II) XINPUT: Adding extended input device "USB2.0 VGA UVC WebCam: USB2.0 V" (type: KEYBOARD, id 11)
[ 121.539] (II) event15 - USB2.0 VGA UVC WebCam: USB2.0 V: is tagged by udev as: Keyboard
[ 121.539] (II) event15 - USB2.0 VGA UVC WebCam: USB2.0 V: device is a keyboard
[ 121.540] (II) config/udev: Adding input device ELAN1200:00 04F3:3067 Mouse (/dev/input/event16)
[ 121.540] (**) ELAN1200:00 04F3:3067 Mouse: Applying InputClass "evdev pointer catchall"
[ 121.540] (**) ELAN1200:00 04F3:3067 Mouse: Applying InputClass "libinput pointer catchall"
[ 121.540] (II) Using input driver 'libinput' for 'ELAN1200:00 04F3:3067 Mouse'
[ 121.540] (**) ELAN1200:00 04F3:3067 Mouse: always reports core events
[ 121.540] (**) Option "Device" "/dev/input/event16"
[ 121.540] (II) event16 - ELAN1200:00 04F3:3067 Mouse: is tagged by udev as: Mouse
[ 121.541] (II) event16 - ELAN1200:00 04F3:3067 Mouse: device is a pointer
[ 121.541] (II) event16 - ELAN1200:00 04F3:3067 Mouse: device removed
[ 121.558] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:17.1/i2c_designware.1/i2c-6/i2c-ELAN1200:00/0018:04F3:3067.0001/input/input18/event16"
[ 121.558] (II) XINPUT: Adding extended input device "ELAN1200:00 04F3:3067 Mouse" (type: MOUSE, id 12)
[ 121.558] (**) Option "AccelerationScheme" "none"
[ 121.558] (**) ELAN1200:00 04F3:3067 Mouse: (accel) selected scheme none/0
[ 121.558] (**) ELAN1200:00 04F3:3067 Mouse: (accel) acceleration factor: 2.000
[ 121.558] (**) ELAN1200:00 04F3:3067 Mouse: (accel) acceleration threshold: 4
[ 121.559] (II) event16 - ELAN1200:00 04F3:3067 Mouse: is tagged by udev as: Mouse
[ 121.559] (II) event16 - ELAN1200:00 04F3:3067 Mouse: device is a pointer
[ 121.560] (II) config/udev: Adding input device ELAN1200:00 04F3:3067 Mouse (/dev/input/mouse0)
[ 121.560] (II) No input driver specified, ignoring this device.
[ 121.560] (II) This device may have been added with another device file.
[ 121.560] (II) config/udev: Adding input device ELAN1200:00 04F3:3067 Touchpad (/dev/input/event17)
[ 121.560] (**) ELAN1200:00 04F3:3067 Touchpad: Applying InputClass "evdev touchpad catchall"
[ 121.560] (**) ELAN1200:00 04F3:3067 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 121.560] (**) ELAN1200:00 04F3:3067 Touchpad: Applying InputClass "touchpad catchall"
[ 121.560] (**) ELAN1200:00 04F3:3067 Touchpad: Applying InputClass "Default clickpad buttons"
[ 121.560] (II) LoadModule: "synaptics"
[ 121.560] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 121.579] (II) Module synaptics: vendor="X.Org Foundation"
[ 121.579] compiled for 1.20.0, module version = 1.9.1
[ 121.579] Module class: X.Org XInput Driver
[ 121.579] ABI class: X.Org XInput driver, version 24.1
[ 121.579] (II) Using input driver 'synaptics' for 'ELAN1200:00 04F3:3067 Touchpad'
[ 121.579] (**) ELAN1200:00 04F3:3067 Touchpad: always reports core events
[ 121.579] (**) Option "Device" "/dev/input/event17"
[ 121.593] (II) synaptics: ELAN1200:00 04F3:3067 Touchpad: found clickpad property
[ 121.593] (--) synaptics: ELAN1200:00 04F3:3067 Touchpad: x-axis range 0 - 3200 (res 31)
[ 121.593] (--) synaptics: ELAN1200:00 04F3:3067 Touchpad: y-axis range 0 - 2198 (res 31)
[ 121.593] (II) synaptics: ELAN1200:00 04F3:3067 Touchpad: device does not report pressure, will use touch data.
[ 121.593] (II) synaptics: ELAN1200:00 04F3:3067 Touchpad: device does not report finger width.
[ 121.593] (--) synaptics: ELAN1200:00 04F3:3067 Touchpad: buttons: left double triple
[ 121.593] (--) synaptics: ELAN1200:00 04F3:3067 Touchpad: Vendor 0x4f3 Product 0x3067
[ 121.593] (--) synaptics: ELAN1200:00 04F3:3067 Touchpad: invalid pressure range. defaulting to 0 - 255
[ 121.593] (--) synaptics: ELAN1200:00 04F3:3067 Touchpad: invalid finger width range. defaulting to 0 - 15
[ 121.593] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 121.593] (--) synaptics: ELAN1200:00 04F3:3067 Touchpad: touchpad found
[ 121.593] (**) ELAN1200:00 04F3:3067 Touchpad: always reports core events
[ 121.605] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:17.1/i2c_designware.1/i2c-6/i2c-ELAN1200:00/0018:04F3:3067.0001/input/input19/event17"
[ 121.605] (II) XINPUT: Adding extended input device "ELAN1200:00 04F3:3067 Touchpad" (type: TOUCHPAD, id 13)
[ 121.605] (**) synaptics: ELAN1200:00 04F3:3067 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 121.605] (**) synaptics: ELAN1200:00 04F3:3067 Touchpad: (accel) MaxSpeed is now 1.75
[ 121.605] (**) synaptics: ELAN1200:00 04F3:3067 Touchpad: (accel) AccelFactor is now 0.052
[ 121.605] (**) ELAN1200:00 04F3:3067 Touchpad: (accel) keeping acceleration scheme 1
[ 121.605] (**) ELAN1200:00 04F3:3067 Touchpad: (accel) acceleration profile 1
[ 121.605] (**) ELAN1200:00 04F3:3067 Touchpad: (accel) acceleration factor: 2.000
[ 121.605] (**) ELAN1200:00 04F3:3067 Touchpad: (accel) acceleration threshold: 4
[ 121.605] (--) synaptics: ELAN1200:00 04F3:3067 Touchpad: touchpad found
[ 121.606] (II) config/udev: Adding input device ELAN1200:00 04F3:3067 Touchpad (/dev/input/mouse1)
[ 121.606] (**) ELAN1200:00 04F3:3067 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 121.606] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[ 121.606] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 121.606] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 121.606] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 121.606] (**) Asus WMI hotkeys: always reports core events
[ 121.606] (**) Option "Device" "/dev/input/event8"
[ 121.607] (II) event8 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 121.607] (II) event8 - Asus WMI hotkeys: device is a keyboard
[ 121.607] (II) event8 - Asus WMI hotkeys: device removed
[ 121.615] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input9/event8"
[ 121.615] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 14)
[ 121.616] (II) event8 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 121.616] (II) event8 - Asus WMI hotkeys: device is a keyboard
[ 121.616] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 121.616] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 121.616] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 121.616] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 121.616] (**) AT Translated Set 2 keyboard: always reports core events
[ 121.616] (**) Option "Device" "/dev/input/event0"
[ 121.617] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 121.617] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 121.618] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 121.629] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 121.629] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 121.630] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 121.630] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 121.631] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 121.631] (II) No input driver specified, ignoring this device.
[ 121.631] (II) This device may have been added with another device file.
[ 121.837] (II) intel(0): EDID vendor "CMN", prod id 5595
[ 121.837] (II) intel(0): Printing DDC gathered Modelines:
[ 121.837] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
~
dmesg on Linux
--------------
[ 0.000000] Linux version 6.0.10_1 (voidlinux@voidlinux) (gcc (GCC) 10.2.1 20201203, GNU ld (GNU Binutils) 2.35.1) #1 SMP PREEMPT_DYNAMIC Mon Nov 28 03:42:58 UTC 2022
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.0.10_1 root=UUID=4147e9fb-400b-449c-a1b0-a64b6b720900 ro loglevel=4
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 2032
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x000000007603ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000076040000-0x0000000079a20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079a21000-0x0000000079a64fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000079a65000-0x0000000079ac4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079ac5000-0x0000000079e6efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079e6f000-0x0000000079f55fff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000079f56000-0x000000007a972fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a973000-0x000000007a973fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007a974000-0x000000007a975fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a976000-0x000000007aa40fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007aa41000-0x000000007aac0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007aac1000-0x000000007affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI=0x79a64000 ACPI 2.0=0x79a64014 TPMFinalLog=0x79a91000 SMBIOS=0x79d2c000 SMBIOS 3.0=0x79d2b000 ESRT=0x728d9a18
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. VivoBook_ASUSLaptop X540MAR_X543MA/X540MAR, BIOS X540MAR.301 03/31/2022
[ 0.000000] tsc: Detected 1094.400 MHz processor
[ 0.000000] [Firmware Bug]: TSC ADJUST: CPU0: -126441715 force to 0
[ 0.000026] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000030] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000046] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000088] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000242] last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[ 0.005207] esrt: Reserving ESRT space from 0x00000000728d9a18 to 0x00000000728d9a50.
[ 0.005214] e820: update [mem 0x728d9000-0x728d9fff] usable ==> reserved
[ 0.005244] Using GB pages for direct mapping
[ 0.006118] Secure boot disabled
[ 0.006119] RAMDISK: [mem 0x2e451000-0x3321ffff]
[ 0.006125] ACPI: Early table checksum verification disabled
[ 0.006130] ACPI: RSDP 0x0000000079A64014 000024 (v02 _ASUS_)
[ 0.006135] ACPI: XSDT 0x0000000079A63728 0000EC (v01 _ASUS_ Notebook 01072009 AMI 01000013)
[ 0.006141] ACPI: FACP 0x0000000079A62000 000114 (v06 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.006148] ACPI: DSDT 0x0000000079A51000 0104FE (v02 _ASUS_ Notebook 01072009 INTL 20160930)
[ 0.006153] ACPI: FACS 0x0000000079AC3000 000040
[ 0.006157] ACPI: FPDT 0x0000000079A50000 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.006161] ACPI: FIDT 0x0000000079A4F000 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.006165] ACPI: MCFG 0x0000000079A4E000 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.006169] ACPI: ECDT 0x0000000079A4D000 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.006173] ACPI: MSDM 0x0000000079A4C000 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.006177] ACPI: SSDT 0x0000000079A4B000 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20160930)
[ 0.006182] ACPI: DBG2 0x0000000079A4A000 000072 (v00 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.006186] ACPI: DBGP 0x0000000079A49000 000034 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.006190] ACPI: HPET 0x0000000079A47000 000038 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.006195] ACPI: LPIT 0x0000000079A46000 00005C (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.006199] ACPI: APIC 0x0000000079A45000 000084 (v04 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.006203] ACPI: NPKT 0x0000000079A44000 000065 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.006207] ACPI: SSDT 0x0000000079A39000 00408E (v02 INTEL DptfTab 00000003 BRXT 0100000D)
[ 0.006211] ACPI: SSDT 0x0000000079A38000 00014E (v01 Intel_ Platform 00001000 INTL 20160930)
[ 0.006215] ACPI: SSDT 0x0000000079A37000 000517 (v02 PmRef Cpu0Ist 00003000 INTL 20160930)
[ 0.006220] ACPI: SSDT 0x0000000079A36000 000775 (v02 CpuRef CpuSsdt 00003000 INTL 20160930)
[ 0.006224] ACPI: SSDT 0x0000000079A35000 00035F (v02 PmRef Cpu0Tst 00003000 INTL 20160930)
[ 0.006228] ACPI: SSDT 0x0000000079A34000 0001E6 (v02 PmRef ApTst 00003000 INTL 20160930)
[ 0.006232] ACPI: SSDT 0x0000000079A31000 00286F (v02 SaSsdt SaSsdt 00003000 INTL 20160930)
[ 0.006236] ACPI: TPM2 0x0000000079A2F000 000034 (v04 _ASUS_ Notebook 00000001 AMI 00000000)
[ 0.006240] ACPI: BGRT 0x0000000079A30000 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.006245] ACPI: DMAR 0x0000000079A48000 0000A8 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.006249] ACPI: WDAT 0x0000000079A2E000 000104 (v01 00000000 00000000)
[ 0.006253] ACPI: WSMT 0x0000000079A43000 000028 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.006256] ACPI: Reserving FACP table memory at [mem 0x79a62000-0x79a62113]
[ 0.006258] ACPI: Reserving DSDT table memory at [mem 0x79a51000-0x79a614fd]
[ 0.006259] ACPI: Reserving FACS table memory at [mem 0x79ac3000-0x79ac303f]
[ 0.006261] ACPI: Reserving FPDT table memory at [mem 0x79a50000-0x79a50043]
[ 0.006262] ACPI: Reserving FIDT table memory at [mem 0x79a4f000-0x79a4f09b]
[ 0.006263] ACPI: Reserving MCFG table memory at [mem 0x79a4e000-0x79a4e03b]
[ 0.006264] ACPI: Reserving ECDT table memory at [mem 0x79a4d000-0x79a4d0c0]
[ 0.006266] ACPI: Reserving MSDM table memory at [mem 0x79a4c000-0x79a4c054]
[ 0.006267] ACPI: Reserving SSDT table memory at [mem 0x79a4b000-0x79a4b0b0]
[ 0.006268] ACPI: Reserving DBG2 table memory at [mem 0x79a4a000-0x79a4a071]
[ 0.006269] ACPI: Reserving DBGP table memory at [mem 0x79a49000-0x79a49033]
[ 0.006271] ACPI: Reserving HPET table memory at [mem 0x79a47000-0x79a47037]
[ 0.006272] ACPI: Reserving LPIT table memory at [mem 0x79a46000-0x79a4605b]
[ 0.006273] ACPI: Reserving APIC table memory at [mem 0x79a45000-0x79a45083]
[ 0.006274] ACPI: Reserving NPKT table memory at [mem 0x79a44000-0x79a44064]
[ 0.006276] ACPI: Reserving SSDT table memory at [mem 0x79a39000-0x79a3d08d]
[ 0.006277] ACPI: Reserving SSDT table memory at [mem 0x79a38000-0x79a3814d]
[ 0.006278] ACPI: Reserving SSDT table memory at [mem 0x79a37000-0x79a37516]
[ 0.006279] ACPI: Reserving SSDT table memory at [mem 0x79a36000-0x79a36774]
[ 0.006281] ACPI: Reserving SSDT table memory at [mem 0x79a35000-0x79a3535e]
[ 0.006282] ACPI: Reserving SSDT table memory at [mem 0x79a34000-0x79a341e5]
[ 0.006283] ACPI: Reserving SSDT table memory at [mem 0x79a31000-0x79a3386e]
[ 0.006284] ACPI: Reserving TPM2 table memory at [mem 0x79a2f000-0x79a2f033]
[ 0.006286] ACPI: Reserving BGRT table memory at [mem 0x79a30000-0x79a30037]
[ 0.006287] ACPI: Reserving DMAR table memory at [mem 0x79a48000-0x79a480a7]
[ 0.006289] ACPI: Reserving WDAT table memory at [mem 0x79a2e000-0x79a2e103]
[ 0.006290] ACPI: Reserving WSMT table memory at [mem 0x79a43000-0x79a43027]
[ 0.006415] No NUMA configuration found
[ 0.006416] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.006421] NODE_DATA(0) allocated [mem 0x17fffb000-0x17fffffff]
[ 0.006456] Zone ranges:
[ 0.006458] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.006460] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.006462] Normal [mem 0x0000000100000000-0x000000017fffffff]
[ 0.006465] Device empty
[ 0.006466] Movable zone start for each node
[ 0.006467] Early memory node ranges
[ 0.006468] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.006470] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.006471] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.006473] node 0: [mem 0x0000000012151000-0x000000007603ffff]
[ 0.006474] node 0: [mem 0x0000000079f56000-0x000000007a972fff]
[ 0.006475] node 0: [mem 0x000000007a976000-0x000000007aa40fff]
[ 0.006477] node 0: [mem 0x000000007aac1000-0x000000007affffff]
[ 0.006478] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.006480] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[ 0.006485] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.006488] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.006520] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.010592] On node 0, zone DMA32: 8529 pages in unavailable ranges
[ 0.010824] On node 0, zone DMA32: 16150 pages in unavailable ranges
[ 0.010828] On node 0, zone DMA32: 3 pages in unavailable ranges
[ 0.010841] On node 0, zone DMA32: 128 pages in unavailable ranges
[ 0.015579] On node 0, zone Normal: 20480 pages in unavailable ranges
[ 0.015601] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.015798] ACPI: PM-Timer IO Port: 0x408
[ 0.015809] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.015812] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.015813] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.015815] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.015849] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[ 0.015853] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.015855] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.015861] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.015862] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.015875] e820: update [mem 0x73579000-0x73591fff] usable ==> reserved
[ 0.015898] TSC deadline timer available
[ 0.015899] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.015947] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.015950] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.015954] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.015957] PM: hibernation: Registered nosave memory: [mem 0x10000000-0x12150fff]
[ 0.015960] PM: hibernation: Registered nosave memory: [mem 0x728d9000-0x728d9fff]
[ 0.015963] PM: hibernation: Registered nosave memory: [mem 0x73579000-0x73591fff]
[ 0.015966] PM: hibernation: Registered nosave memory: [mem 0x76040000-0x79a20fff]
[ 0.015967] PM: hibernation: Registered nosave memory: [mem 0x79a21000-0x79a64fff]
[ 0.015968] PM: hibernation: Registered nosave memory: [mem 0x79a65000-0x79ac4fff]
[ 0.015969] PM: hibernation: Registered nosave memory: [mem 0x79ac5000-0x79e6efff]
[ 0.015970] PM: hibernation: Registered nosave memory: [mem 0x79e6f000-0x79f55fff]
[ 0.015973] PM: hibernation: Registered nosave memory: [mem 0x7a973000-0x7a973fff]
[ 0.015974] PM: hibernation: Registered nosave memory: [mem 0x7a974000-0x7a975fff]
[ 0.015977] PM: hibernation: Registered nosave memory: [mem 0x7aa41000-0x7aac0fff]
[ 0.015980] PM: hibernation: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
[ 0.015981] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xcfffffff]
[ 0.015982] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
[ 0.015983] PM: hibernation: Registered nosave memory: [mem 0xd1000000-0xd3708fff]
[ 0.015984] PM: hibernation: Registered nosave memory: [mem 0xd3709000-0xd3709fff]
[ 0.015985] PM: hibernation: Registered nosave memory: [mem 0xd370a000-0xdfffffff]
[ 0.015986] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.015987] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
[ 0.015988] PM: hibernation: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
[ 0.015989] PM: hibernation: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
[ 0.015990] PM: hibernation: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
[ 0.015992] PM: hibernation: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
[ 0.015993] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.015994] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.015995] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.015996] PM: hibernation: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
[ 0.015997] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.015998] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.015999] PM: hibernation: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.016001] [mem 0x80000000-0xcfffffff] available for PCI devices
[ 0.016002] Booting paravirtualized kernel on bare hardware
[ 0.016007] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.021514] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.021866] percpu: Embedded 56 pages/cpu s191464 r8192 d29720 u524288
[ 0.021879] pcpu-alloc: s191464 r8192 d29720 u524288 alloc=1*2097152
[ 0.021883] pcpu-alloc: [0] 0 1 2 3
[ 0.021928] Fallback order for Node 0: 0
[ 0.021935] Built 1 zonelists, mobility grouping on. Total pages: 987353
[ 0.021937] Policy zone: Normal
[ 0.021939] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.10_1 root=UUID=4147e9fb-400b-449c-a1b0-a64b6b720900 ro loglevel=4
[ 0.022012] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.0.10_1", will be passed to user space.
[ 0.022523] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.022794] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.022849] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.022867] software IO TLB: area num 4.
[ 0.053600] Memory: 3604664K/4012744K available (14342K kernel code, 3314K rwdata, 7512K rodata, 1956K init, 2888K bss, 407820K reserved, 0K cma-reserved)
[ 0.054468] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.054498] ftrace: allocating 40511 entries in 159 pages
[ 0.062306] ftrace: allocated 159 pages with 6 groups
[ 0.063227] Dynamic Preempt: voluntary
[ 0.063313] rcu: Preemptible hierarchical RCU implementation.
[ 0.063315] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.063317] Trampoline variant of Tasks RCU enabled.
[ 0.063317] Rude variant of Tasks RCU enabled.
[ 0.063318] Tracing variant of Tasks RCU enabled.
[ 0.063319] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.063320] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.070397] NR_IRQS: 16640, nr_irqs: 1024, preallocated irqs: 16
[ 0.070658] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.070799] random: crng init done
[ 0.070836] Console: colour dummy device 80x25
[ 0.070863] printk: console [tty0] enabled
[ 0.070889] ACPI: Core revision 20220331
[ 0.071211] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.071304] APIC: Switch to symmetric I/O mode setup
[ 0.071307] DMAR: Host address width 39
[ 0.071309] DMAR: DRHD base: 0x000000fed64000 flags: 0x0
[ 0.071318] DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
[ 0.071321] DMAR: DRHD base: 0x000000fed65000 flags: 0x1
[ 0.071328] DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.071332] DMAR: RMRR base: 0x000000799b0000 end: 0x000000799cffff
[ 0.071334] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[ 0.071338] DMAR-IR: IOAPIC id 1 under DRHD base 0xfed65000 IOMMU 1
[ 0.071340] DMAR-IR: HPET id 0 under DRHD base 0xfed65000
[ 0.071341] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.073310] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.073314] x2apic enabled
[ 0.073337] Switched APIC routing to cluster x2apic.
[ 0.077872] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.082264] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[ 0.082276] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=1094400)
[ 0.082280] pid_max: default: 32768 minimum: 301
[ 0.088308] LSM: Security Framework initializing
[ 0.088315] Yama: becoming mindful.
[ 0.088363] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.088375] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.088727] CPU0: Thermal monitoring enabled (TM1)
[ 0.088731] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.088831] process: using mwait in idle threads
[ 0.088834] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.088836] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.088842] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.088845] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.088847] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.088849] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.088851] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.108485] Freeing SMP alternatives memory: 36K
[ 0.108615] smpboot: CPU0: Intel(R) Pentium(R) Silver N5030 CPU @ 1.10GHz (family: 0x6, model: 0x7a, stepping: 0x8)
[ 0.108804] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.108807] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.108829] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.108849] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.108868] Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.108908] ... version: 4
[ 0.108909] ... bit width: 48
[ 0.108910] ... generic registers: 4
[ 0.108910] ... value mask: 0000ffffffffffff
[ 0.108912] ... max period: 00007fffffffffff
[ 0.108913] ... fixed-purpose events: 3
[ 0.108914] ... event mask: 000000070000000f
[ 0.109015] Estimated ratio of average max frequency by base frequency (times 1024): 2885
[ 0.109042] rcu: Hierarchical SRCU implementation.
[ 0.109043] rcu: Max phase no-delay instances is 400.
[ 0.109372] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.109451] smp: Bringing up secondary CPUs ...
[ 0.109586] x86: Booting SMP configuration:
[ 0.109588] .... node #0, CPUs: #1
[ 0.004504] [Firmware Bug]: TSC ADJUST differs within socket(s), fixing all errors
[ 0.110462] #2 #3
[ 0.112358] smp: Brought up 1 node, 4 CPUs
[ 0.112358] smpboot: Max logical packages: 1
[ 0.112358] smpboot: Total of 4 processors activated (8755.20 BogoMIPS)
[ 0.112897] devtmpfs: initialized
[ 0.112897] x86/mm: Memory block size: 128MB
[ 0.113715] ACPI: PM: Registering ACPI NVS region [mem 0x79a65000-0x79ac4fff] (393216 bytes)
[ 0.113715] ACPI: PM: Registering ACPI NVS region [mem 0x7a973000-0x7a973fff] (4096 bytes)
[ 0.113715] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.113715] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.113715] pinctrl core: initialized pinctrl subsystem
[ 0.114706] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.114820] audit: initializing netlink subsys (disabled)
[ 0.114858] audit: type=2000 audit(1672281196.040:1): state=initialized audit_enabled=0 res=1
[ 0.114858] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.114858] thermal_sys: Registered thermal governor 'step_wise'
[ 0.114858] thermal_sys: Registered thermal governor 'user_space'
[ 0.114858] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.114858] cpuidle: using governor ladder
[ 0.114858] cpuidle: using governor menu
[ 0.114858] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.114858] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.114858] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.114858] PCI: Using configuration type 1 for base access
[ 0.116725] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.117287] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.117289] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.117291] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.117292] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.117369] ACPI: Added _OSI(Module Device)
[ 0.117371] ACPI: Added _OSI(Processor Device)
[ 0.117372] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.117374] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.117375] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.117376] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.117378] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.129816] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.130622] ACPI: EC: EC started
[ 0.130623] ACPI: EC: interrupt blocked
[ 0.131735] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.131737] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.134986] ACPI: Dynamic OEM Table Load:
[ 0.134996] ACPI: SSDT 0xFFFF96C4C0DEC600 000190 (v02 PmRef Cpu0Cst 00003001 INTL 20160930)
[ 0.135933] ACPI: Dynamic OEM Table Load:
[ 0.135940] ACPI: SSDT 0xFFFF96C4C0DED600 0001E6 (v02 PmRef ApIst 00003000 INTL 20160930)
[ 0.136724] ACPI: Dynamic OEM Table Load:
[ 0.136731] ACPI: SSDT 0xFFFF96C4C118EE00 0000C9 (v02 PmRef ApCst 00003000 INTL 20160930)
[ 0.138173] ACPI: Interpreter enabled
[ 0.138211] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.138213] ACPI: Using IOAPIC for interrupt routing
[ 0.138250] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.138252] PCI: Using E820 reservations for host bridge windows
[ 0.138617] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.142721] ACPI: PM: Power Resource [DRST]
[ 0.142960] ACPI: PM: Power Resource [DRST]
[ 0.143192] ACPI: PM: Power Resource [DRST]
[ 0.143438] ACPI: PM: Power Resource [DRST]
[ 0.143673] ACPI: PM: Power Resource [DRST]
[ 0.143912] ACPI: PM: Power Resource [DRST]
[ 0.144290] ACPI: PM: Power Resource [WRST]
[ 0.148673] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.148683] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.149458] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[ 0.150409] PCI host bridge to bus 0000:00
[ 0.150412] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.150414] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.150416] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.150418] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.150420] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[ 0.150422] pci_bus 0000:00: root bus resource [mem 0x7c000001-0xcfffffff window]
[ 0.150424] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[ 0.150425] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
[ 0.150427] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
[ 0.150429] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
[ 0.150430] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
[ 0.150432] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
[ 0.150436] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
[ 0.150438] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
[ 0.150439] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
[ 0.150441] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
[ 0.150443] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.150474] pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
[ 0.150611] pci 0000:00:00.1: [8086:318c] type 00 class 0x118000
[ 0.150635] pci 0000:00:00.1: reg 0x10: [mem 0x80000000-0x80007fff 64bit]
[ 0.150774] pci 0000:00:00.3: [8086:3190] type 00 class 0x088000
[ 0.150786] pci 0000:00:00.3: reg 0x10: [mem 0xa1224000-0xa1224fff 64bit]
[ 0.150908] pci 0000:00:02.0: [8086:3184] type 00 class 0x030000
[ 0.150918] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[ 0.150924] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.150929] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.150946] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.150950] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.151171] pci 0000:00:0e.0: [8086:3198] type 00 class 0x040300
[ 0.151190] pci 0000:00:0e.0: reg 0x10: [mem 0xa1210000-0xa1213fff 64bit]
[ 0.151211] pci 0000:00:0e.0: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
[ 0.151261] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[ 0.152479] pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
[ 0.152506] pci 0000:00:0f.0: reg 0x10: [mem 0xa1223000-0xa1223fff 64bit]
[ 0.152597] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.152711] pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
[ 0.152725] pci 0000:00:12.0: reg 0x10: [mem 0xa1214000-0xa1215fff]
[ 0.152733] pci 0000:00:12.0: reg 0x14: [mem 0xa1222000-0xa12220ff]
[ 0.152740] pci 0000:00:12.0: reg 0x18: [io 0xf090-0xf097]
[ 0.152748] pci 0000:00:12.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.152755] pci 0000:00:12.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.152763] pci 0000:00:12.0: reg 0x24: [mem 0xa1221000-0xa12217ff]
[ 0.152798] pci 0000:00:12.0: PME# supported from D3hot
[ 0.152878] pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400
[ 0.152941] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.153045] pci 0000:00:13.3: [8086:31db] type 01 class 0x060400
[ 0.153106] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
[ 0.153221] pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
[ 0.153238] pci 0000:00:15.0: reg 0x10: [mem 0xa1200000-0xa120ffff 64bit]
[ 0.153307] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.153444] pci 0000:00:17.0: [8086:31b4] type 00 class 0x118000
[ 0.153465] pci 0000:00:17.0: reg 0x10: [mem 0xa1220000-0xa1220fff 64bit]
[ 0.153479] pci 0000:00:17.0: reg 0x18: [mem 0xa121f000-0xa121ffff 64bit]
[ 0.153604] pci 0000:00:17.1: [8086:31b6] type 00 class 0x118000
[ 0.153629] pci 0000:00:17.1: reg 0x10: [mem 0xa121e000-0xa121efff 64bit]
[ 0.153643] pci 0000:00:17.1: reg 0x18: [mem 0xa121d000-0xa121dfff 64bit]
[ 0.153788] pci 0000:00:18.0: [8086:31bc] type 00 class 0x118000
[ 0.153807] pci 0000:00:18.0: reg 0x10: [mem 0xa121c000-0xa121cfff 64bit]
[ 0.153821] pci 0000:00:18.0: reg 0x18: [mem 0xa121b000-0xa121bfff 64bit]
[ 0.153944] pci 0000:00:18.1: [8086:31be] type 00 class 0x118000
[ 0.153965] pci 0000:00:18.1: reg 0x10: [mem 0xa121a000-0xa121afff 64bit]
[ 0.153978] pci 0000:00:18.1: reg 0x18: [mem 0xa1219000-0xa1219fff 64bit]
[ 0.154101] pci 0000:00:18.2: [8086:31c0] type 00 class 0x118000
[ 0.154122] pci 0000:00:18.2: reg 0x10: [mem 0xfea10000-0xfea10fff 64bit]
[ 0.154136] pci 0000:00:18.2: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
[ 0.154258] pci 0000:00:18.3: [8086:31ee] type 00 class 0x118000
[ 0.154280] pci 0000:00:18.3: reg 0x10: [mem 0xa1218000-0xa1218fff 64bit]
[ 0.154312] pci 0000:00:18.3: reg 0x18: [mem 0xa1217000-0xa1217fff 64bit]
[ 0.154473] pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
[ 0.154695] pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
[ 0.154750] pci 0000:00:1f.1: reg 0x10: [mem 0xa1216000-0xa12160ff 64bit]
[ 0.154808] pci 0000:00:1f.1: reg 0x20: [io 0xf040-0xf05f]
[ 0.154969] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.155035] pci 0000:02:00.0: [10ec:c821] type 00 class 0x028000
[ 0.155055] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.155078] pci 0000:02:00.0: reg 0x18: [mem 0xa1100000-0xa110ffff 64bit]
[ 0.155109] pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
[ 0.155115] pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128)
[ 0.155205] pci 0000:02:00.0: supports D1 D2
[ 0.155207] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.155360] pci 0000:00:13.3: PCI bridge to [bus 02]
[ 0.155364] pci 0000:00:13.3: bridge window [io 0xe000-0xefff]
[ 0.155368] pci 0000:00:13.3: bridge window [mem 0xa1100000-0xa11fffff]
[ 0.156715] ACPI: PCI: Interrupt link LNKA configured for IRQ 3
[ 0.156785] ACPI: PCI: Interrupt link LNKB configured for IRQ 4
[ 0.156855] ACPI: PCI: Interrupt link LNKC configured for IRQ 5
[ 0.156923] ACPI: PCI: Interrupt link LNKD configured for IRQ 6
[ 0.156992] ACPI: PCI: Interrupt link LNKE configured for IRQ 7
[ 0.157060] ACPI: PCI: Interrupt link LNKF configured for IRQ 9
[ 0.157128] ACPI: PCI: Interrupt link LNKG configured for IRQ 10
[ 0.157196] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.162785] ACPI: EC: interrupt unblocked
[ 0.162788] ACPI: EC: event unblocked
[ 0.162805] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.162807] ACPI: EC: GPE=0x25
[ 0.162808] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot ECDT EC initialization complete
[ 0.162811] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
[ 0.162874] iommu: Default domain type: Translated
[ 0.162876] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.163005] pps_core: LinuxPPS API ver. 1 registered
[ 0.163006] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti%linux.it@localhost>
[ 0.163009] PTP clock support registered
[ 0.163019] EDAC MC: Ver: 3.0.0
[ 0.163099] Registered efivars operations
[ 0.163468] mctp: management component transport protocol core
[ 0.163470] NET: Registered PF_MCTP protocol family
[ 0.163476] PCI: Using ACPI for IRQ routing
[ 0.192046] PCI: pci_cache_line_size set to 64 bytes
[ 0.192125] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 0.192128] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.192131] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.192133] e820: reserve RAM buffer [mem 0x728d9000-0x73ffffff]
[ 0.192134] e820: reserve RAM buffer [mem 0x73579000-0x73ffffff]
[ 0.192135] e820: reserve RAM buffer [mem 0x76040000-0x77ffffff]
[ 0.192137] e820: reserve RAM buffer [mem 0x7a973000-0x7bffffff]
[ 0.192138] e820: reserve RAM buffer [mem 0x7aa41000-0x7bffffff]
[ 0.192140] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[ 0.192158] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.192158] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.192158] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.192158] vgaarb: loaded
[ 0.192295] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.192304] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[ 0.194311] clocksource: Switched to clocksource tsc-early
[ 0.194465] VFS: Disk quotas dquot_6.6.0
[ 0.194480] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.194561] pnp: PnP ACPI init
[ 0.194649] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.194653] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.194655] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 0.194657] system 00:00: [io 0x0600-0x061f] has been reserved
[ 0.194659] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.194956] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.194959] system 00:02: [mem 0xfea00000-0xfeafffff] could not be reserved
[ 0.194962] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.194964] system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.194966] system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.194969] system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
[ 0.194971] system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
[ 0.194973] system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.194976] system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.195499] pnp: PnP ACPI: found 4 devices
[ 0.202003] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.202104] NET: Registered PF_INET protocol family
[ 0.202211] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.203555] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.203607] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.203663] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.203774] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.203834] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.203915] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.203945] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.203964] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.204013] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.204022] NET: Registered PF_XDP protocol family
[ 0.204050] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009e000-0x000fffff]
[ 0.204057] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffc000001 64bit] for e820 entry [mem 0x7b000000-0x7fffffff]
[ 0.204064] clipped [mem size 0x00050000 64bit] to [mem size 0xffffffffffff0000 64bit] for e820 entry [mem 0x0009e000-0x000fffff]
[ 0.204067] clipped [mem size 0x03ffffff 64bit] to [mem size 0x00000000 64bit] for e820 entry [mem 0x7b000000-0x7fffffff]
[ 0.204071] pci 0000:00:18.2: BAR 2: assigned [mem 0x80008000-0x80008fff 64bit]
[ 0.204087] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.204096] pci 0000:00:13.3: PCI bridge to [bus 02]
[ 0.204099] pci 0000:00:13.3: bridge window [io 0xe000-0xefff]
[ 0.204103] pci 0000:00:13.3: bridge window [mem 0xa1100000-0xa11fffff]
[ 0.204109] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.204111] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.204113] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.204115] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.204117] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
[ 0.204119] pci_bus 0000:00: resource 9 [mem 0x7c000001-0xcfffffff window]
[ 0.204120] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xefffffff window]
[ 0.204122] pci_bus 0000:00: resource 11 [mem 0xfea00000-0xfeafffff window]
[ 0.204124] pci_bus 0000:00: resource 12 [mem 0xfed00000-0xfed003ff window]
[ 0.204126] pci_bus 0000:00: resource 13 [mem 0xfed01000-0xfed01fff window]
[ 0.204127] pci_bus 0000:00: resource 14 [mem 0xfed03000-0xfed03fff window]
[ 0.204129] pci_bus 0000:00: resource 15 [mem 0xfed06000-0xfed06fff window]
[ 0.204131] pci_bus 0000:00: resource 16 [mem 0xfed08000-0xfed09fff window]
[ 0.204132] pci_bus 0000:00: resource 17 [mem 0xfed80000-0xfedbffff window]
[ 0.204134] pci_bus 0000:00: resource 18 [mem 0xfed1c000-0xfed1cfff window]
[ 0.204136] pci_bus 0000:00: resource 19 [mem 0xfee00000-0xfeefffff window]
[ 0.204138] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.204140] pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa11fffff]
[ 0.204668] PCI: CLS 64 bytes, default 64
[ 0.204691] DMAR: No ATSR found
[ 0.204693] DMAR: No SATC found
[ 0.204695] DMAR: IOMMU feature fl1gp_support inconsistent
[ 0.204696] DMAR: IOMMU feature pgsel_inv inconsistent
[ 0.204697] DMAR: IOMMU feature nwfs inconsistent
[ 0.204698] DMAR: IOMMU feature eafs inconsistent
[ 0.204699] DMAR: IOMMU feature prs inconsistent
[ 0.204700] DMAR: IOMMU feature nest inconsistent
[ 0.204701] DMAR: IOMMU feature mts inconsistent
[ 0.204702] DMAR: IOMMU feature sc_support inconsistent
[ 0.204703] DMAR: IOMMU feature dev_iotlb_support inconsistent
[ 0.204704] DMAR: dmar0: Using Queued invalidation
[ 0.204708] DMAR: dmar1: Using Queued invalidation
[ 0.204744] Trying to unpack rootfs image as initramfs...
[ 0.204854] pci 0000:00:00.0: Adding to iommu group 0
[ 0.204864] pci 0000:00:00.1: Adding to iommu group 0
[ 0.204873] pci 0000:00:00.3: Adding to iommu group 0
[ 0.204890] pci 0000:00:02.0: Adding to iommu group 1
[ 0.204901] pci 0000:00:0e.0: Adding to iommu group 2
[ 0.204915] pci 0000:00:0f.0: Adding to iommu group 3
[ 0.204929] pci 0000:00:12.0: Adding to iommu group 4
[ 0.204943] pci 0000:00:13.0: Adding to iommu group 5
[ 0.204955] pci 0000:00:13.3: Adding to iommu group 6
[ 0.204967] pci 0000:00:15.0: Adding to iommu group 7
[ 0.204982] pci 0000:00:17.0: Adding to iommu group 8
[ 0.204993] pci 0000:00:17.1: Adding to iommu group 8
[ 0.205012] pci 0000:00:18.0: Adding to iommu group 9
[ 0.205021] pci 0000:00:18.1: Adding to iommu group 9
[ 0.205031] pci 0000:00:18.2: Adding to iommu group 9
[ 0.205041] pci 0000:00:18.3: Adding to iommu group 9
[ 0.205056] pci 0000:00:1f.0: Adding to iommu group 10
[ 0.205068] pci 0000:00:1f.1: Adding to iommu group 10
[ 0.205080] pci 0000:02:00.0: Adding to iommu group 11
[ 0.206462] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.206465] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.206466] software IO TLB: mapped [mem 0x0000000067000000-0x000000006b000000] (64MB)
[ 0.206528] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
[ 0.206662] clocksource: Switched to clocksource tsc
[ 0.207095] Initialise system trusted keyrings
[ 0.207172] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.208590] zbud: loaded
[ 0.217031] Key type asymmetric registered
[ 0.217033] Asymmetric key parser 'x509' registered
[ 1.080760] Freeing initrd memory: 79676K
[ 1.083576] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 1.083621] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.083666] io scheduler mq-deadline registered
[ 1.083668] io scheduler kyber registered
[ 1.083712] io scheduler bfq registered
[ 1.084302] pcieport 0000:00:13.0: PME: Signaling with IRQ 122
[ 1.084524] pcieport 0000:00:13.3: PME: Signaling with IRQ 123
[ 1.086524] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.087852] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.087854] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.087907] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[ 1.087909] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.093328] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.093508] mousedev: PS/2 mouse device common for all mice
[ 1.093554] rtc_cmos 00:03: RTC can wake from S4
[ 1.094341] rtc_cmos 00:03: registered as rtc0
[ 1.094484] rtc_cmos 00:03: setting system clock to 2022-12-29T02:33:17 UTC (1672281197)
[ 1.094528] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
[ 1.094762] intel_pstate: Intel P-state driver initializing
[ 1.095240] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.095278] efifb: probing for efifb
[ 1.095296] efifb: Ignoring BGRT: unexpected or invalid BMP data
[ 1.095297] efifb: framebuffer at 0x90000000, using 1920k, total 1920k
[ 1.095299] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 1.095301] efifb: scrolling: redraw
[ 1.095302] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.095406] fbcon: Deferring console take-over
[ 1.095408] fb0: EFI VGA frame buffer device
[ 1.108396] NET: Registered PF_INET6 protocol family
[ 1.108828] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.112042] Segment Routing with IPv6
[ 1.112045] RPL Segment Routing with IPv6
[ 1.112056] In-situ OAM (IOAM) with IPv6
[ 1.112081] NET: Registered PF_PACKET protocol family
[ 1.112173] Key type dns_resolver registered
[ 1.112666] microcode: sig=0x706a8, pf=0x1, revision=0x1c
[ 1.112748] microcode: Microcode Update Driver: v2.2.
[ 1.112876] resctrl: L2 allocation detected
[ 1.112884] IPI shorthand broadcast: enabled
[ 1.112910] sched_clock: Marking stable (1109353170, 3504237)->(1114311997, -1454590)
[ 1.113064] registered taskstats version 1
[ 1.113185] Loading compiled-in X.509 certificates
[ 1.113423] zswap: loaded using pool lzo/zbud
[ 1.113714] Key type .fscrypt registered
[ 1.113716] Key type fscrypt-provisioning registered
[ 1.116403] Freeing unused kernel image (initmem) memory: 1956K
[ 1.124591] Write protecting the kernel read-only data: 24576k
[ 1.125459] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.125697] Freeing unused kernel image (rodata/data gap) memory: 680K
[ 1.126454] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.126462] Run /init as init process
[ 1.126464] with arguments:
[ 1.126466] /init
[ 1.126467] with environment:
[ 1.126468] HOME=/
[ 1.126469] TERM=linux
[ 1.126470] BOOT_IMAGE=/boot/vmlinuz-6.0.10_1
[ 1.204320] raid6: sse2x4 gen() 10312 MB/s
[ 1.221321] raid6: sse2x2 gen() 10447 MB/s
[ 1.238315] raid6: sse2x1 gen() 8709 MB/s
[ 1.238317] raid6: using algorithm sse2x2 gen() 10447 MB/s
[ 1.255316] raid6: .... xor() 7065 MB/s, rmw enabled
[ 1.255317] raid6: using ssse3x2 recovery algorithm
[ 1.255960] xor: measuring software checksum speed
[ 1.256622] prefetch64-sse : 14992 MB/sec
[ 1.257398] generic_sse : 12809 MB/sec
[ 1.257400] xor: using function: prefetch64-sse (14992 MB/sec)
[ 1.373101] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=no
[ 1.479708] device-mapper: uevent: version 1.0.3
[ 1.479837] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel%redhat.com@localhost
[ 1.493079] systemd-udevd[304]: starting version 3.2.11
[ 1.494799] udevd[305]: starting eudev-3.2.11
[ 1.514678] dracut: rd.md=0: removing MD RAID activation
[ 1.559919] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/PNP0C09:01/PNP0C0C:00/input/input1
[ 1.559964] ACPI: button: Power Button [PWRB]
[ 1.560029] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/PNP0C09:01/PNP0C0D:01/input/input2
[ 1.560058] ACPI: button: Lid Switch [LID]
[ 1.560124] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.560150] ACPI: button: Sleep Button [SLPB]
[ 1.560189] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:01/input/input4
[ 1.560213] ACPI: button: Power Button [PWRB]
[ 1.585795] ACPI: battery: Slot [BAT0] (battery present)
[ 1.586980] hid: raw HID events driver (C) Jiri Kosina
[ 1.591189] Linux agpgart interface v0.103
[ 1.601005] SCSI subsystem initialized
[ 1.607126] cryptd: max_cpu_qlen set to 1000
[ 1.616696] SSE version of gcm_enc/dec engaged.
[ 1.618223] libata version 3.00 loaded.
[ 1.637488] ACPI: bus type drm_connector registered
[ 1.642415] ACPI: bus type USB registered
[ 1.642449] usbcore: registered new interface driver usbfs
[ 1.642459] usbcore: registered new interface driver hub
[ 1.642476] usbcore: registered new device driver usb
[ 1.644898] ahci 0000:00:12.0: version 3.0
[ 1.655285] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.655295] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst
[ 1.655764] scsi host0: ahci
[ 1.655973] scsi host1: ahci
[ 1.656031] ata1: SATA max UDMA/133 abar m2048@0xa1221000 port 0xa1221100 irq 124
[ 1.656035] ata2: SATA max UDMA/133 abar m2048@0xa1221000 port 0xa1221180 irq 124
[ 1.968882] ata2: SATA link down (SStatus 4 SControl 300)
[ 2.129508] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.131779] ata1.00: ATA-10: TOSHIBA MQ04ABF100, JU0C2J, max UDMA/100
[ 2.132849] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.138321] ata1.00: configured for UDMA/100
[ 2.138680] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ04ABF1 2J PQ: 0 ANSI: 5
[ 2.141408] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 2.141420] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 2.142584] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 2.142921] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 2.142927] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 2.142931] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[ 2.142996] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
[ 2.143000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.143002] usb usb1: Product: xHCI Host Controller
[ 2.143004] usb usb1: Manufacturer: Linux 6.0.10_1 xhci-hcd
[ 2.143006] usb usb1: SerialNumber: 0000:00:15.0
[ 2.143218] hub 1-0:1.0: USB hub found
[ 2.143239] hub 1-0:1.0: 9 ports detected
[ 2.144554] sd 0:0:0:0: [sda] Drive-managed SMR disk
[ 2.144561] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.144564] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.144567] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00
[ 2.144571] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.144574] usb usb2: Product: xHCI Host Controller
[ 2.144576] usb usb2: Manufacturer: Linux 6.0.10_1 xhci-hcd
[ 2.144577] usb usb2: SerialNumber: 0000:00:15.0
[ 2.144580] sd 0:0:0:0: [sda] Write Protect is off
[ 2.144584] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.144607] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.144638] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 2.144753] hub 2-0:1.0: USB hub found
[ 2.144772] hub 2-0:1.0: 7 ports detected
[ 2.218459] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 2.219340] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.387284] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 2.514074] usb 1-1: New USB device found, idVendor=13d3, idProduct=3529, bcdDevice= 1.10
[ 2.514078] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.514080] usb 1-1: Product: Bluetooth Radio
[ 2.514082] usb 1-1: Manufacturer: Realtek
[ 2.514083] usb 1-1: SerialNumber: 00e04c000001
[ 2.576430] i915 0000:00:02.0: [drm] Unknown revid 0x06
[ 2.576833] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 2.576996] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.577056] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 2.577131] i915 0000:00:02.0: [drm] couldn't get memory information
[ 2.577404] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.578578] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[ 2.630289] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 2.688106] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 2.689247] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.689556] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 2.716676] fbcon: i915drmfb (fb0) is primary device
[ 2.716680] fbcon: Deferring console take-over
[ 2.716683] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 2.756599] usb 1-2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
[ 2.756610] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.756613] usb 1-2: Product: 802.11n NIC
[ 2.756615] usb 1-2: Manufacturer: Realtek
[ 2.756617] usb 1-2: SerialNumber: 00E04C0001
[ 2.871444] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 3.023401] usb 1-5: New USB device found, idVendor=13d3, idProduct=5a11, bcdDevice=17.02
[ 3.023420] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.023427] usb 1-5: Product: USB2.0 VGA UVC WebCam
[ 3.023433] usb 1-5: Manufacturer: Azurewave
[ 3.023438] usb 1-5: SerialNumber:
[ 3.140449] usb 1-6: new high-speed USB device number 5 using xhci_hcd
[ 3.267757] usb 1-6: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 3.267766] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.267769] usb 1-6: Product: USB2.0-CRW
[ 3.267771] usb 1-6: Manufacturer: Generic
[ 3.267773] usb 1-6: SerialNumber: 20100201396000000
[ 3.271929] usbcore: registered new interface driver rtsx_usb
[ 3.419142] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: none.
[ 3.640890] EXT4-fs (sda4): unmounting filesystem.
[ 3.648450] dracut: Checking ext4: /dev/disk/by-uuid/4147e9fb-400b-449c-a1b0-a64b6b720900
[ 3.648658] dracut: issuing e2fsck -a /dev/disk/by-uuid/4147e9fb-400b-449c-a1b0-a64b6b720900
[ 4.037365] dracut: /dev/disk/by-uuid/4147e9fb-400b-449c-a1b0-a64b6b720900: clean, 449955/28164096 files, 44321576/112640078 blocks
[ 4.040213] dracut: Mounting /dev/disk/by-uuid/4147e9fb-400b-449c-a1b0-a64b6b720900 with -o defaults,ro
[ 4.064505] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: none.
[ 4.410809] dracut: Mounted root filesystem /dev/sda4
[ 4.517294] dracut: Switching root
[ 4.685729] fbcon: Taking over console
[ 4.687423] Console: switching to colour frame buffer device 170x48
[ 5.577115] fuse: init (API version 7.36)
[ 5.678610] Non-volatile memory driver v1.3
[ 5.695685] loop: module loaded
[ 5.733499] tun: Universal TUN/TAP device driver, 1.6
[ 5.745270] PPP generic driver version 2.4.2
[ 5.863822] VFIO - User Level meta-driver version: 0.3
[ 6.001366] Bluetooth: Core ver 2.22
[ 6.001403] NET: Registered PF_BLUETOOTH protocol family
[ 6.001405] Bluetooth: HCI device and connection manager initialized
[ 6.001411] Bluetooth: HCI socket layer initialized
[ 6.001414] Bluetooth: L2CAP socket layer initialized
[ 6.001419] Bluetooth: SCO socket layer initialized
[ 6.078390] NET: Registered PF_VSOCK protocol family
[ 6.363183] udevd[614]: starting version 3.2.11
[ 6.895645] udevd[615]: starting eudev-3.2.11
[ 7.061608] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input6
[ 7.077973] Consider using thermal netlink events interface
[ 7.122818] ACPI: AC: AC Adapter [AC0] (off-line)
[ 7.300073] thermal LNXTHERM:00: registered as thermal_zone3
[ 7.300080] ACPI: thermal: Thermal Zone [THRM] (35 C)
[ 7.397819] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 7.399352] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.402270] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.411201] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops __SCT__tp_func_intel_frontbuffer_flush [i915])
[ 7.440137] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 7.440521] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 7.440926] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 7.441353] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 7.447870] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[ 7.447945] i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
[ 7.448037] i2c i2c-4: 4/4 memory slots populated (from DMI)
[ 7.493151] asus_wmi: ASUS WMI generic driver loaded
[ 7.494400] asus_wmi: Initialization: 0x1
[ 7.494444] asus_wmi: BIOS WMI version: 9.0
[ 7.494474] asus_wmi: SFUN value: 0x21
[ 7.494478] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 7.494481] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[ 7.495985] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input8
[ 7.513928] asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19
[ 7.514059] asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19
[ 7.518942] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 7.518946] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 7.518948] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 7.518949] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 7.518950] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 7.523245] ACPI: battery: new extension: ASUS Battery Extension
[ 7.542445] intel_rapl_common: Found RAPL domain package
[ 7.542451] intel_rapl_common: Found RAPL domain core
[ 7.542453] intel_rapl_common: Found RAPL domain uncore
[ 7.542456] intel_rapl_common: Found RAPL domain dram
[ 7.586864] mei_hdcp 0000:00:0f.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops __SCT__tp_func_intel_frontbuffer_flush [i915])
[ 7.588532] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 7.588539] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.588541] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 7.588544] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.588545] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.588547] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 7.588549] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x1b
[ 7.588551] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x13
[ 7.618983] mc: Linux media interface: v0.10
[ 7.682551] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
[ 7.682639] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
[ 7.682711] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
[ 7.682784] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
[ 7.682852] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13
[ 7.682923] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14
[ 7.800817] videodev: Linux video capture interface: v2.00
[ 7.812385] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.831937] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[ 7.840423] rtw_8821ce 0000:02:00.0: enabling device (0000 -> 0003)
[ 7.853775] EEPROM ID = 0x8129
[ 7.854786] usbcore: registered new interface driver r8188eu
[ 7.856230] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.856247] cfg80211: failed to load regulatory.db
[ 7.883165] rtw_8821ce 0000:02:00.0: Firmware version 24.11.0, H2C version 12
[ 7.921713] usbcore: registered new interface driver btusb
[ 8.149754] usb 1-5: Found UVC 1.00 device USB2.0 VGA UVC WebCam (13d3:5a11)
[ 8.152663] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:15.0/usb1/1-5/1-5:1.0/input/input15
[ 8.152815] usbcore: registered new interface driver uvcvideo
[ 8.154524] intel_telemetry_core Init
[ 8.270440] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 8.284754] dw-apb-uart.2: ttyS0 at MMIO 0xa121c000 (irq = 4, base_baud = 115200) is a 16550A
[ 8.288420] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 8.296766] dw-apb-uart.3: ttyS1 at MMIO 0xa121a000 (irq = 5, base_baud = 115200) is a 16550A
[ 8.310361] dw-apb-uart.4: ttyS2 at MMIO 0xfea10000 (irq = 6, base_baud = 115200) is a 16550A
[ 8.314658] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 8.322739] dw-apb-uart.5: ttyS3 at MMIO 0xa1218000 (irq = 7, base_baud = 115200) is a 16550A
[ 8.332203] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 8.468173] rtw_8821ce 0000:02:00.0 wlo1: renamed from wlan1
[ 8.478434] r8188eu 1-2:1.0 wlp0s21f0u2: renamed from wlan0
[ 8.551481] input: ELAN1200:00 04F3:3067 Mouse as /devices/pci0000:00/0000:00:17.1/i2c_designware.1/i2c-6/i2c-ELAN1200:00/0018:04F3:3067.0001/input/input16
[ 8.551795] input: ELAN1200:00 04F3:3067 Touchpad as /devices/pci0000:00/0000:00:17.1/i2c_designware.1/i2c-6/i2c-ELAN1200:00/0018:04F3:3067.0001/input/input17
[ 8.552078] hid-generic 0018:04F3:3067.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3067] on i2c-ELAN1200:00
[ 8.762371] input: ELAN1200:00 04F3:3067 Mouse as /devices/pci0000:00/0000:00:17.1/i2c_designware.1/i2c-6/i2c-ELAN1200:00/0018:04F3:3067.0001/input/input18
[ 8.762854] input: ELAN1200:00 04F3:3067 Touchpad as /devices/pci0000:00/0000:00:17.1/i2c_designware.1/i2c-6/i2c-ELAN1200:00/0018:04F3:3067.0001/input/input19
[ 8.763311] hid-multitouch 0018:04F3:3067.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3067] on i2c-ELAN1200:00
[ 10.175022] EXT4-fs (sda4): re-mounted. Quota mode: none.
[ 11.356803] EXT4-fs (sda4): re-mounted. Quota mode: none.
[ 11.471092] Adding 8191996k swap on /dev/sda5. Priority:-2 extents:1 across:8191996k FS
[ 12.364191] udevd[748]: starting version 3.2.11
[ 12.371718] udevd[748]: starting eudev-3.2.11
[ 17.352767] wlo1: authenticate with ac:37:28:5d:0d:fd
[ 17.849453] wlo1: send auth to ac:37:28:5d:0d:fd (try 1/3)
[ 17.850315] wlo1: authenticated
[ 17.857489] wlo1: associate with ac:37:28:5d:0d:fd (try 1/3)
[ 17.860764] wlo1: RX AssocResp from ac:37:28:5d:0d:fd (capab=0x1911 status=0 aid=2)
[ 17.861119] wlo1: associated
[ 19.172711] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
~
dmesg on NetBSD with boot -vx. Note: Without -vx the display goes blank during mode switch.
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/pkg/lib/xorg/modules"
FontPath "/usr/pkg/share/fonts/X11/misc"
FontPath "/usr/pkg/share/fonts/X11/TTF"
FontPath "/usr/pkg/share/fonts/X11/OTF"
FontPath "/usr/pkg/share/fonts/X11/Type1"
FontPath "/usr/pkg/share/fonts/X11/100dpi"
FontPath "/usr/pkg/share/fonts/X11/75dpi"
FontPath "/usr/pkg/share/fonts/X11/cyrillic"
FontPath "/usr/pkg/lib/X11/fonts/misc"
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020, 2021, 2022
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 10.0_BETA (GENERIC) #0: Mon Dec 26 11:25:01 UTC 2022
[ 1.000000] mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 3918 MB
[ 1.000000] avail memory = 3761 MB
[ 1.000000] pool redzone disabled for 'buf2k'
[ 1.000000] pool redzone disabled for 'buf4k'
[ 1.000000] pool redzone disabled for 'buf32k'
[ 1.000000] pool redzone disabled for 'buf64k'
[ 1.000000] pool redzone disabled for 'sigacts'
[ 1.000000] pool redzone disabled for 'mclpl'
[ 1.000000] pool redzone disabled for 'dirhashblk'
[ 1.000000] pool redzone disabled for 'dirhashblk'
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] RTC BIOS diagnostic error 0x3f<config_unit,memory_size,fixed_disk,invalid_time>
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.000004] efi: systbl at pa 79e6e018
[ 1.000004] efi: systbl mapped at va ffffb3011c9cd018
[ 1.000004] efi: signature 5453595320494249 revision 20046 crc32 65336fdf
[ 1.000004] efi: firmware revision 5000d
[ 1.000004] efi: runtime services at pa 0x79e6eb98
[ 1.000004] efi: boot services at pa 0x0
[ 1.000004] efi: cfgtbl at pa 79e6ec98
[ 1.000004] efi: cfgtbl mapped at va ffffb3011c9cfc98
[ 1.000004] efi: 12 cfgtbl entries:
[ 1.000004] efi: 0x7a26f950 05ad34ba-6f02-4214-952e-4da0398e2bb9
[ 1.000004] efi: 0x75a1a018 7739f24c-93d7-11d4-9a3a-0090273fc14d
[ 1.000004] efi: 0x7a26f2b0 4c19049f-4137-4dd3-9c10-8b97a83ffdfa
[ 1.000004] efi: 0x7a270870 49152e77-1ada-4764-b7a2-7afefed95e8b
[ 1.000004] efi: 0x79e6c398 00781ca1-5de3-405f-abb8-379c3c076984
[ 1.000004] efi: 0x79a64000 eb9d2d30-2d88-11d3-9a16-0090273fc14d ACPI 1.0
[ 1.000004] efi: 0x79a64014 8868e871-e4f1-11d3-bc22-0080c73c8881 ACPI 2.0
[ 1.000004] efi: 0x79a91000 1e2ed096-30e2-4254-bd89-863bbef82325
[ 1.000004] efi: 0x79d2c000 eb9d2d31-2d88-11d3-9a16-0090273fc14d SMBIOS
[ 1.000004] efi: 0x79d2b000 f2fd1544-9794-4a2c-992e-e5bbcf20e394 SMBIOS3
[ 1.000004] efi: 0x799fad98 4e28ca50-d582-44ac-a11f-e3d56526db34
[ 1.000004] efi: 0x728d9a18 b122a263-3661-4f68-9929-78f8b0d62180
[ 1.000004] efi_runtime_init: map 938 pages at 0 to 0x79ac5000 type 6 attrs 0x800000000000000f
[ 1.000004] efi_runtime_init: map 231 pages at 0 to 0x79e6f000 type 5 attrs 0x800000000000000f
[ 1.000004] efi_runtime_init: map 2 pages at 0 to 0x7a974000 type 6 attrs 0x800000000000000f
[ 1.000004] efi_runtime_init: map 128 pages at 0 to 0x7aa41000 type 6 attrs 0x800000000000000f
[ 1.000004] efi_runtime_init: map 4096 pages at 0 to 0xd0000000 type 11 attrs 0x8000000000000001
[ 1.000004] efi_runtime_init: map 1 pages at 0 to 0xd3709000 type 11 attrs 0x8000000000000001
[ 1.000004] efi_runtime_init: map 65536 pages at 0 to 0xe0000000 type 11 attrs 0x8000000000000001
[ 1.000004] efi_runtime_init: map 1 pages at 0 to 0xfe042000 type 11 attrs 0x8000000000000001
[ 1.000004] efi_runtime_init: map 1 pages at 0 to 0xfe043000 type 11 attrs 0x800000000000100d
[ 1.000004] efi_runtime_init: map 1 pages at 0 to 0xfe044000 type 11 attrs 0x8000000000000001
[ 1.000004] efi_runtime_init: map 3 pages at 0 to 0xfe900000 type 11 attrs 0x8000000000000001
[ 1.000004] efi_r
>How-To-Repeat:
Looks specific to this hardware. Rotate screen using xrandr (or using Rotate option in xorg.conf). Try command line operations such as opening vi editor to notice the slow refresh.
>Fix:
Not known.
Home |
Main Index |
Thread Index |
Old Index