NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: port-amd64/57144: No HDMI output, no touchpad recognized on AMD Radeon based laptop



The following reply was made to PR port-amd64/57144; it has been noted by GNATS.

From: Mayuresh <mayuresh%acm.org@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: port-amd64/57144: No HDMI output, no touchpad recognized on AMD
 Radeon based laptop
Date: Sat, 31 Dec 2022 07:38:53 +0530

 --bzdvejfuwolmzzhv
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: inline
 
 I tried enabling these kernel options and I do see output on HDMI now.
 
     amdgpu*       at pci? dev ? function ?
     amdgpufb*     at amdgpufbbus?
 
 However there are a few problems
 
 1. Now eDP output (laptop monitor) looks very faint, almost invisible,
 immediately after the display mode switch during boot.
 
 2. HDMI screen has a slow refresh issue.
 
 Attaching dmesg, xorg.conf and Xorg.0.log.
 
 EE lines from the log indicate absence of radeonsi_dri.so. Not sure if it
 is in pkg. Or does base X11 provide one?
 
     [   505.533] (EE) AMDGPU(1): [drm] Failed to open DRM device for pci:0000:00:01.1: Operation not supported by device
     [   505.533] (EE) Screen 1 deleted because of no matching config section.
     [   505.775] (EE) AIGLX error: dlopen of /usr/pkg/lib/dri/radeonsi_dri.so failed (Cannot open "/usr/pkg/lib/dri/radeonsi_dri.so")
     [   505.775] (EE) AIGLX error: unable to load driver radeonsi
     [   506.675] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counter
     [   507.224] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counte
 
 --bzdvejfuwolmzzhv
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: attachment; filename="dmesg.lenovo.amdgpu"
 
 etached
 [   580.083016] midi0: detached
 [   580.083016] pchb8: detached
 [   580.083016] pchb7: detached
 [   580.083016] pchb6: detached
 [   580.083016] pchb5: detached
 [   580.083016] pchb4: detached
 [   580.083016] pchb3: detached
 [   580.083016] pchb2: detached
 [   580.083016] pchb1: detached
 [   580.083016] ppb1: detached
 [   580.083016] pchb0: detached
 [   580.083016] dk1 at wd0 (80818f9f-4d94-4ffa-b29a-74c30754a155) deleted
 [   580.083016] dk1: detached
 [   580.083016] dk0 at wd0 (bed6b46c-83bc-4e7f-86ef-dc4aa73b187a) deleted
 [   580.083016] dk0: detached
 [     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
 [     1.000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
 [     1.000000]     2018, 2019, 2020, 2021, 2022
 [     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
 [     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
 [     1.000000]     The Regents of the University of California.  All rights reserved.
 
 [     1.000000] NetBSD 10.0_BETA (MYKERNEL) #0: Fri Dec 30 23:04:04 IST 2022
 [     1.000000] 	root@lenovon:/usr/src/sys/arch/amd64/compile/MYKERNEL
 [     1.000000] total memory = 7647 MB
 [     1.000000] avail memory = 7364 MB
 [     1.000000] timecounter: Timecounters tick every 10.000 msec
 [     1.000000] Kernelized RAIDframe activated
 [     1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 [     1.000004] efi: systbl at pa df4be018
 [     1.000004] mainbus0 (root)
 [     1.000004] ACPI: RSDP 0x00000000DFBFE014 000024 (v02 LENOVO)
 [     1.000004] ACPI: XSDT 0x00000000DFBD9188 0000C4 (v01 LENOVO CB-01    00000001      01000013)
 [     1.000004] ACPI: FACP 0x00000000DFBF9000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: DSDT 0x00000000DFBEB000 008D37 (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: FACS 0x00000000DFB85000 000040
 [     1.000004] ACPI: UEFI 0x00000000DFBFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: ASF! 0x00000000DFBFB000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: BOOT 0x00000000DFBFA000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: HPET 0x00000000DFBF8000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: APIC 0x00000000DFBF7000 000090 (v03 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: MCFG 0x00000000DFBF6000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: SPCR 0x00000000DFBF5000 000050 (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: UEFI 0x00000000DFBF4000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: SSDT 0x00000000DFBEA000 0006B2 (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: SSDT 0x00000000DFBE5000 004B5B (v02 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: IVRS 0x00000000DFBE4000 0000D0 (v02 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: CRAT 0x00000000DFBE3000 0002E8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: SSDT 0x00000000DFBE2000 000482 (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: TPM2 0x00000000DFBE1000 000034 (v03 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: SSDT 0x00000000DFBE0000 000174 (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: SSDT 0x00000000DFBDE000 0015B7 (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: SSDT 0x00000000DFBDC000 00165E (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: FPDT 0x00000000DFBDB000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: BGRT 0x00000000DFBDA000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
 [     1.000004] ACPI: 7 ACPI AML tables successfully acquired and loaded
 [     1.000004] ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
 [     1.000004] ioapic1 at mainbus0 apid 5: pa 0xfec01000, version 0x21, 32 pins
 [     1.000004] cpu0 at mainbus0 apid 16
 [     1.000004] cpu0: Use mfence to serialize rdtsc
 [     1.000004] cpu0: AMD A6-9225 RADEON R4, 5 COMPUTE CORES 2C+3G   , id 0x670f00
 [     1.000004] cpu0: node 0, package 0, core 0, smt 0
 [     1.000004] cpu1 at mainbus0 apid 17
 [     1.000004] cpu1: AMD A6-9225 RADEON R4, 5 COMPUTE CORES 2C+3G   , id 0x670f00
 [     1.000004] cpu1: node 0, package 0, core 1, smt 0
 [     1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
 [     1.000004] acpi0: X/RSDT: OemId <LENOVO,CB-01   ,00000001>, AslId <    ,01000013>
 [     1.000004] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
 [     1.000004] acpi0: SCI interrupting at int 9
 [     1.000004] acpi0: fixed power button present
 [     1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 [     1.045352] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
 [     1.045352] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
 [     1.046839] acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
 [     1.046839] acpivga0 at acpi0 (VGA): ACPI Display Adapter
 [     1.046839] acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
 [     1.046839] acpiout0: brightness levels: [2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68,70,72,74,76,78,80,82,84,86,88,90,92,94,96,98,100]
 [     1.046839] I2SC at acpivga0 not configured
 [     1.046839] acpivga0: connected output devices:
 [     1.046839] acpivga0:   0x0100: Ext. Monitor, head 0, bios detect
 [     1.046839] acpivga0:   0x0110 (acpiout0): LCD Panel, head 0, bios detect
 [     1.046839] acpivga0:   0x0200: TV, head 0
 [     1.046839] acpivga0:   0x0210: Unknown Output Device, head 0, bios detect
 [     1.046839] acpivga0:   0x0220: Unknown Output Device, head 0, bios detect
 [     1.046839] RTKC (RTK0000) at acpi0 not configured
 [     1.046839] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 [     1.046839] spkr0 at pcppi1: PC Speaker
 [     1.046839] wsbell at spkr0 not configured
 [     1.046839] midi0 at pcppi1: PC speaker
 [     1.046839] sysbeep0 at pcppi1
 [     1.046839] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
 [     1.046839] pckbc1 at acpi0 (KBC0, FUJ7401) (kbd port): io 0x60,0x64 irq 1
 [     1.046839] MEM (PNP0C01) at acpi0 not configured
 [     1.046839] VPC0 (VPC2004) at acpi0 not configured
 [     1.046839] acpibat0 at acpi0 (BAT1, PNP0C0A-0): ACPI Battery
 [     1.046839] acpibat0: ACPI 4.0 functionality present
 [     1.046839] acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
 [     1.046839] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
 [     1.046839] acpilid1 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
 [     1.046839] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 [     1.046839] GPIO (AMD0030) at acpi0 not configured
 [     1.046839] GPS0 (BCM4752) at acpi0 not configured
 [     1.046839] dwiic0 at acpi0 (I2CA, AMD0010-0): mem 0xfedc2000-0xfedc2fff irq 3
 [     1.046839] resource type 0x11 ignored
 [     1.046839] iic0 at dwiic0: I2C bus
 [     1.046839] ihidev0 at iic0 addr 0x15: vendor 0x4f3 product 0x400, TPD1
 [     1.046839] ihidev0: 11 report ids
 [     1.046839] ihidev0: autoconfiguration error: no IRQ resource
 [     1.046839] NFC1 (BCM2F25) at acpi0 not configured
 [     1.046839] acpiwmi0 at acpi0 (WMI4, PNP0C14-WBAT): ACPI WMI Interface
 [     1.046839] acpiwmibus at acpiwmi0 not configured
 [     1.046839] TPM (MSFT0101) at acpi0 not configured
 [     1.046839] attimer1: attached to pcppi1
 [     1.046839] pckbd0 at pckbc1 (kbd slot)
 [     1.046839] pckbc1: using irq 1 for kbd slot
 [     1.046839] wskbd0 at pckbd0: console keyboard
 [     1.046839] pci0 at mainbus0 bus 0: configuration mode 1
 [     1.046839] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 [     1.046839] amdsmn0 at pci0 dev 0 function 0: AMD System Management Network
 [     1.046839] amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family15h)
 [     1.046839] AMD 15h/6xh IOMMU (IOMMU system) at pci0 dev 0 function 2 not configured
 [     1.046839] amdgpu0 at pci0 dev 1 function 0: ATI Technologies Radeon R2/R3/R4/R5 Graphics (rev. 0xea)
 [     1.046839] hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
 [     1.046839] hdaudio0: interrupting at msi0 vec 0
 [     1.046839] hdaudio0: HDA ver. 1.0, OSS 2, ISS 0, BSS 0, SDO 1, 64-bit
 [     1.046839] hdafg0 at hdaudio0: ATI R6xx HDMI
 [     1.046839] hdafg0: HDMI00 2ch: Digital Out [Jack]
 [     1.046839] hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
 [     1.046839] audio0 at hdafg0: playback
 [     1.046839] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
 [     1.046839] spkr1 at audio0: PC Speaker (synthesized)
 [     1.046839] wsbell at spkr1 not configured
 [     1.046839] pchb0 at pci0 dev 2 function 0: AMD 15h/6xh Host Bridge (rev. 0x00)
 [     1.046839] ppb0 at pci0 dev 2 function 2: AMD 15h/6xh Root Port (rev. 0x00)
 [     1.046839] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
 [     1.046839] ppb0: link is x1 @ 2.5GT/s
 [     1.046839] pci1 at ppb0 bus 1
 [     1.046839] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 [     1.046839] re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x15)
 [     1.046839] re0: interrupting at msix1 vec 0
 [     1.046839] re0: RTL8168H/8111H (0x5400)
 [     1.046839] re0: Ethernet address 9c:5a:44:79:91:8d
 [     1.046839] re0: using 256 tx descriptors
 [     1.046839] rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
 [     1.046839] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
 [     1.046839] ppb1 at pci0 dev 2 function 4: AMD 15h/6xh Root Port (rev. 0x00)
 [     1.046839] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
 [     1.046839] ppb1: link is x1 @ 2.5GT/s
 [     1.046839] pci2 at ppb1 bus 2
 [     1.046839] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 [     1.046839] Realtek Semiconductor RTL8821CE 802.11ac PCIe NIC (miscellaneous network) at pci2 dev 0 function 0 not configured
 [     1.046839] pchb1 at pci0 dev 3 function 0: AMD 15h/6xh Host Bridge (rev. 0x00)
 [     1.046839] AMD 15h/6xh PSP (miscellaneous crypto) at pci0 dev 8 function 0 not configured
 [     1.046839] pchb2 at pci0 dev 9 function 0: AMD 15h/6xh Host Bridge (rev. 0x00)
 [     1.046839] hdaudio1 at pci0 dev 9 function 2: HD Audio Controller
 [     1.046839] hdaudio1: interrupting at ioapic1 pin 22
 [     1.046839] hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
 [     1.046839] hdafg1 at hdaudio1: Realtek product 0236
 [     1.046839] hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
 [     1.046839] hdafg1: ADC01 2ch: Mic In [Built-In]
 [     1.046839] hdafg1: ADC02 2ch: Mic In [Jack]
 [     1.046839] hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
 [     1.046839] audio1 at hdafg1: playback, capture, full duplex, independent
 [     1.046839] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
 [     1.046839] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
 [     1.046839] spkr2 at audio1: PC Speaker (synthesized)
 [     1.046839] wsbell at spkr2 not configured
 [     1.046839] xhci0 at pci0 dev 16 function 0: AMD FCH xHCI (rev. 0x20)
 [     1.046839] xhci0: 64-bit DMA
 [     1.046839] xhci0: interrupting at msix2 vec 0
 [     1.046839] xhci0: xHCI version 1.0
 [     1.046839] usb0 at xhci0: USB revision 3.0
 [     1.046839] usb1 at xhci0: USB revision 2.0
 [     1.046839] ahcisata0 at pci0 dev 17 function 0: AMD FCH SATA AHCI (rev. 0x4b)
 [     1.046839] ahcisata0: 64-bit DMA
 [     1.046839] ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xf733ff01<PSC,SSC,PMD,FBSS,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
 [     1.046839] ahcisata0: interrupting at ioapic0 pin 19
 [     1.046839] atabus0 at ahcisata0 channel 0
 [     1.046839] atabus1 at ahcisata0 channel 1
 [     1.046839] ehci0 at pci0 dev 18 function 0: AMD FCH EHCI (rev. 0x49)
 [     1.046839] ehci0: 32-bit DMA
 [     1.046839] ehci0: interrupting at ioapic0 pin 18
 [     1.046839] ehci0: BIOS has given up ownership
 [     1.046839] ehci0: EHCI version 1.0
 [     1.046839] ehci0: Using DMA subregion for control data structures
 [     1.046839] usb2 at ehci0: USB revision 2.0
 [     1.046839] piixpm0 at pci0 dev 20 function 0: AMD X370/X399 SMBus Controller (rev. 0x4b)
 [     1.046839] piixpm0: interrupting at SMI, 
 [     1.046839] iic1 at piixpm0 port 0: I2C bus
 [     1.046839] iic2 at piixpm0 port 1: I2C bus
 [     1.046839] pcib0 at pci0 dev 20 function 3: AMD FCH LPC (rev. 0x11)
 [     1.046839] pchb3 at pci0 dev 24 function 0: AMD 15h/7xh HyperTransport Configuration (rev. 0x00)
 [     1.046839] pchb4 at pci0 dev 24 function 1: AMD 15h/7xh Address Map Configuration (rev. 0x00)
 [     1.046839] pchb5 at pci0 dev 24 function 2: AMD 15h/7xh DRAM Configuration (rev. 0x00)
 [     1.046839] pchb6 at pci0 dev 24 function 3: AMD 15h/7xh North Bridge Configuration (rev. 0x00)
 [     1.046839] pchb7 at pci0 dev 24 function 4: AMD 15h/7xh CPU C-state Configuration (rev. 0x00)
 [     1.046839] pchb8 at pci0 dev 24 function 5: AMD 15h/7xh Miscellaneous Configuration (rev. 0x00)
 [     1.046839] isa0 at pcib0
 [     1.046839] acpicpu0 at cpu0: ACPI CPU
 [     1.046839] acpicpu0: C1: HLT, lat   0 us, pow     0 mW
 [     1.046839] acpicpu0: C2: I/O, lat 400 us, pow     0 mW
 [     1.046839] acpicpu0: P0: FFH, lat   4 us, pow  9460 mW, 2600 MHz
 [     1.046839] acpicpu0: P1: FFH, lat   4 us, pow  7380 mW, 2400 MHz
 [     1.046839] acpicpu0: P2: FFH, lat   4 us, pow  5795 mW, 2200 MHz
 [     1.046839] acpicpu0: P3: FFH, lat   4 us, pow  4500 mW, 1900 MHz
 [     1.046839] acpicpu0: P4: FFH, lat   4 us, pow  3217 mW, 1600 MHz
 [     1.046839] acpicpu0: P5: FFH, lat   4 us, pow  2598 mW, 1300 MHz
 [     1.046839] acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
 [     1.046839] acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
 [     1.046839] acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
 [     1.046839] acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
 [     1.046839] acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
 [     1.046839] acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
 [     1.046839] acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
 [     1.046839] acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
 [     1.046839] acpicpu1 at cpu1: ACPI CPU
 [     1.046839] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 [     1.046839] timecounter: Timecounter "TSC" frequency 2595125000 Hz quality 3000
 [     1.619508] acpibat0: LENOVO  Li-Ion rechargeable battery
 [     1.619508] acpibat0: granularity: low->warn 0.264 Wh, warn->full 3.780 Wh
 [     1.619508] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
 [     1.628976] uhub0: 4 ports with 4 removable, self powered
 [     1.628976] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
 [     1.638975] uhub1: 4 ports with 4 removable, self powered
 [     1.638975] acpiacad0: AC adapter online.
 [     1.638975] acpivga0: connected output devices:
 [     1.638975] acpivga0:   0x0100: Ext. Monitor, head 0, bios detect
 [     1.638975] acpivga0:   0x0110 (acpiout0): LCD Panel, head 0, bios detect
 [     1.638975] acpivga0:   0x0200: TV, head 0
 [     1.638975] acpivga0:   0x0210: Unknown Output Device, head 0, bios detect
 [     1.638975] acpivga0:   0x0220: Unknown Output Device, head 0, bios detect
 [     1.638975] acpivga0: connected output devices:
 [     1.638975] acpivga0:   0x0100: Ext. Monitor, head 0, bios detect
 [     1.638975] acpivga0:   0x0110 (acpiout0): LCD Panel, head 0, bios detect
 [     1.638975] acpivga0:   0x0200: TV, head 0
 [     1.638975] acpivga0:   0x0210: Unknown Output Device, head 0, bios detect
 [     1.638975] acpivga0:   0x0220: Unknown Output Device, head 0, bios detect
 [     1.638975] IPsec: Initialized Security Association Processing.
 [     1.659076] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
 [     1.659076] uhub2: 2 ports with 2 removable, self powered
 [     1.739075] ahcisata0 port 0: device present, speed: 6.0Gb/s
 [     1.739075] ahcisata0 port 1: device present, speed: 1.5Gb/s
 [     1.769075] wd0 at atabus0 drive 0
 [     1.769075] wd0: <TOSHIBA MQ04ABF100>
 [     1.769075] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 [     1.769075] wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors (4096 bytes/physsect; first aligned sector: 8)
 [     1.849075] wd0: GPT GUID: 829ca912-c411-4bf9-820e-b9ecad0d2553
 [     1.849075] dk0 at wd0: "bed6b46c-83bc-4e7f-86ef-dc4aa73b187a", 614400 blocks at 4096, type: msdos
 [     1.849075] dk1 at wd0: "80818f9f-4d94-4ffa-b29a-74c30754a155", 1258291200 blocks at 618496, type: ext2fs
 [     1.849075] dk2 at wd0: "be1e5856-4e07-2044-bf2a-0efd58efdba0", 694615439 blocks at 1258909696, type: ffs
 [     1.858977] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA, NCQ (32 tags)
 [     1.858977] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags)
 [     1.858977] atapibus0 at atabus1: 1 targets
 [     1.868977] cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GUE0N, KVNJ7GE0413, T.02> cdrom removable
 [     1.879075] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 [     1.879075] cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 [     2.069076] uhub3 at uhub0 port 2: Microchip Tech (0x0424) USB5744 (0x5744), class 9/0, rev 3.10/2.86, addr 1
 [     2.078980] uhub3: 2 ports with 2 removable, self powered
 [     2.129078] uhub4 at uhub1 port 2: Microchip Tech (0x0424) USB2744 (0x2744), class 9/0, rev 2.10/2.86, addr 2
 [     2.129078] uhub4: multiple transaction translators
 [     2.129078] uhub4: 4 ports with 4 removable, self powered
 [     2.649081] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [     2.649081] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [     2.658980] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [     2.668979] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [     2.709080] uhub5 at uhub2 port 1: vendor 0438 (0x0438) product 7900 (0x7900), class 9/0, rev 2.00/0.18, addr 2
 [     2.709080] uhub5: single transaction translator
 [     2.709080] uhub5: 4 ports with 4 removable, self powered
 [     2.889079] uhidev0 at uhub4 port 3 configuration 1 interface 0
 [     2.889079] uhidev0: SIGMACHIP (0x1c4f) USB Keyboard (0x0002), rev 1.10/1.50, addr 3, iclass 3/1
 [     2.889079] ukbd0 at uhidev0
 [     2.899459] wskbd1 at ukbd0 mux 1
 [     2.899459] uhidev1 at uhub4 port 3 configuration 1 interface 1
 [     2.899459] uhidev1: SIGMACHIP (0x1c4f) USB Keyboard (0x0002), rev 1.10/1.50, addr 3, iclass 3/0
 [     2.899459] uhidev1: 2 report ids
 [     2.909357] uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
 [     2.909357] uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
 [     3.329025] uhidev2 at uhub4 port 4 configuration 1 interface 0
 [     3.329025] uhidev2: PixArt (0x17ef) Lenovo USB Optical Mouse (0x608d), rev 2.00/1.00, addr 4, iclass 3/1
 [     3.329025] ums0 at uhidev2: 3 buttons and Z dir
 [     3.339551] wsmouse0 at ums0 mux 0
 [     3.439081] ubt0 at uhub5 port 2
 [     3.448985] ubt0: Realtek (0x0bda) Bluetooth Radio (0xc024), rev 1.10/1.10, addr 3
 [     3.679082] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [     3.679082] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [     3.688985] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [     3.698983] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [     3.809084] urtwn0 at uhub1 port 3
 [     3.809084] urtwn0: Realtek (0x0bda) 802.11n NIC (0x8179), rev 2.00/0.00, addr 5
 [     3.958982] uvideo0 at uhub5 port 3 configuration 1 interface 0: Sonix Technology Co., Ltd. (0x174f) EasyCamera (0x241a), rev 2.00/0.13, addr 4
 [     3.968985] video0 at uvideo0: Sonix Technology Co., Ltd. (0x174f) EasyCamera (0x241a), rev 2.00/0.13, addr 4
 [     3.988984] urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address d0:37:45:e7:11:0f
 [     4.000082] urtwn0: 1 rx pipe, 2 tx pipes
 [     4.000082] swwdog0: software watchdog initialized
 [     4.118984] WARNING: 1 error while detecting hardware; check system log.
 [     4.118984] boot device: wd0
 [     4.118984] root on dk2
 [     4.159084] root file system type: ffs
 [     4.169818] kern.module.path=/stand/amd64/10.0/modules
 [     4.169818] [drm] initializing kernel modesetting (STONEY 0x1002:0x98E4 0x17AA:0x39F5 0xEA).
 [     4.178988] [drm] register mmio base: 0xF0400000
 [     4.178988] [drm] register mmio size: 262144
 [     4.188984] [drm] PCI I/O BAR is not found.
 [     4.198983] [drm] add ip block number 0 <vi_common>
 [     4.198983] [drm] add ip block number 1 <gmc_v8_0>
 [     4.208983] [drm] add ip block number 2 <cz_ih>
 [     4.208983] [drm] add ip block number 3 <gfx_v8_0>
 [     4.218983] [drm] add ip block number 4 <sdma_v3_0>
 [     4.228984] [drm] add ip block number 5 <powerplay>
 [     4.228984] [drm] add ip block number 6 <dce_v11_0>
 [     4.238983] [drm] add ip block number 7 <uvd_v6_0>
 [     4.248984] [drm] add ip block number 8 <vce_v3_0>
 [     4.248984] [drm] add ip block number 9 <acp_ip>
 [     4.258984] ATOM BIOS: 113-C91400-007
 [     4.268984] [drm] UVD is enabled in physical mode
 [     4.278984] [drm] VCE enabled in VM mode
 [     4.278984] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
 [     4.288984] amdgpu0: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
 [     4.298984] amdgpu0: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
 [     4.308985] [drm] Detected VRAM RAM=512M, BAR=512M
 [     4.308985] [drm] RAM width 64bits UNKNOWN
 [     4.318984] Zone  kernel: Available graphics memory: 9007199254088218 KiB
 [     4.328986] Zone   dma32: Available graphics memory: 2097152 KiB
 [     4.338984] [drm] amdgpu: 512M of VRAM memory ready
 [     4.338984] [drm] amdgpu: 3072M of GTT memory ready.
 [     4.348985] [drm] GART: num cpu pages 262144, num gpu pages 262144
 [     4.358984] [drm] PCIE GART of 1024M enabled (table at 0x000000F400300000).
 [     4.358984] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [     4.368985] [drm] Driver supports precise vblank timestamp query.
 [     4.379542] amdgpu0: interrupting at msi3 vec 0 (amdgpu0)
 [     4.649087] hwmgr_sw_init smu backed is smu8_smu
 [     4.649087] powerplay sw init successfully
 [     4.658988] [drm] AMDGPU Display Connectors
 [     4.668987] [drm] Connector 0:
 [     4.668987] [drm]   eDP-1
 [     4.678986] [drm]   HPD1
 [     4.688986] [drm]   DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
 [     4.688986] [drm]   Encoders:
 [     4.698986] [drm]     LCD1: INTERNAL_UNIPHY
 [     4.708987] [drm] Connector 1:
 [     4.708987] [drm]   HDMI-A-1
 [     4.718987] [drm]   HPD2
 [     4.718987] [drm]   DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
 [     4.728987] [drm]   Encoders:
 [     4.738987] [drm]     DFP1: INTERNAL_UNIPHY
 [     4.738987] [drm] Found UVD firmware Version: 1.43 Family ID: 15
 [     4.748986] [drm] UVD ENC is disabled
 [     4.789087] [drm] Found VCE firmware Version: 34.0 Binary ID: 3
 [     4.798990] smu version 26.17.00
 [     4.858985] [drm] UVD initialized successfully.
 [     4.968986] [drm] VCE initialized successfully.
 [     4.988986] min_core_set_clock not set
 [     4.988986] Setting Deep Sleep Clock: 800
 [     4.998988] enabling ALL SMU features.
 [     5.008987] enable Low Memory PState.
 [     5.008987] min_core_set_clock not set
 [     5.018988] Setting Deep Sleep Clock: 800
 [     5.028988] enable Low Memory PState.
 [     5.658988] amdgpufb0 at amdgpu0
 [     5.668995] min_core_set_clock not set
 [     5.668995] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [     5.668995] Setting Deep Sleep Clock: 800
 [     5.668995] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND)enable Low Memory PState.
 [     5.684785]  (20221020/psparse-580)
 [     5.684785] [drm] Initialized amdgpu 3.36.0 20150101 for amdgpu0 on minor 0
 [     5.692600] ACPI Error: amdgpufb0: framebuffer at 0x1ff76e000, size 1366x768, depth 32, stride 5632
 [     5.699343] Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [     5.699343] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [     6.278990] min_core_set_clock not set
 [     6.288993] Setting Deep Sleep Clock: 800
 [     6.288993] enable Low Memory PState.
 [     6.298992] min_core_set_clock not set
 [     6.308994] Setting Deep Sleep Clock: 800
 [     6.308994] enable Low Memory PState.
 [     6.928993] min_core_set_clock not set
 [     6.938993] Setting Deep Sleep Clock: 800
 [     6.938993] enable Low Memory PState.
 [     6.948994] min_core_set_clock not set
 [     6.958993] Setting Deep Sleep Clock: 800
 [     6.958993] enable Low Memory PState.
 [     7.468995] wsdisplay0 at amdgpufb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
 [     7.598995] wsmux1: connecting to wsdisplay0
 [     7.608997] wskbd1: connecting to wsdisplay0
 [     7.608997] min_core_set_clock not set
 [     7.608997] Setting Deep Sleep Clock: 800
 [     7.608997] enable Low Memory PState.
 [     8.609101] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [     8.609101] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [     8.609101] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [     8.609101] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [     9.609004] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [     9.609004] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [     9.609004] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [     9.609004] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [    16.629034] wsdisplay0: screen 1 added (default, vt100 emulation)
 [    16.629034] wsdisplay0: screen 2 added (default, vt100 emulation)
 [    16.629034] wsdisplay0: screen 3 added (default, vt100 emulation)
 [    16.639034] wsdisplay0: screen 4 added (default, vt100 emulation)
 [    25.439304] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [    25.439304] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [    25.439304] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [    25.439304] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [    26.279221] min_core_set_clock not set
 [    26.279221] Setting Deep Sleep Clock: 800
 [    26.279221] enable Low Memory PState.
 [    26.279221] min_core_set_clock not set
 [    26.279221] Setting Deep Sleep Clock: 800
 [    26.279221] enable Low Memory PState.
 [    32.979481] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [    32.979481] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [    32.979481] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [    32.979481] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [    63.360193] wsmouse0: detached
 [    63.360193] ums0: detached
 [    63.360193] uhidev2: detached
 [    63.360193] uhidev2: at uhub4 port 4 (addr 4) disconnected
 [    65.060230] uhidev2 at uhub4 port 4 configuration 1 interface 0
 [    65.060230] uhidev2: PixArt (0x17ef) Lenovo USB Optical Mouse (0x608d), rev 2.00/1.00, addr 4, iclass 3/1
 [    65.060230] ums0 at uhidev2: 3 buttons and Z dir
 [    65.060230] wsmouse0 at ums0 mux 0
 [    68.120199] min_core_set_clock not set
 [    68.120199] Setting Deep Sleep Clock: 800
 [    68.120199] enable Low Memory PState.
 [    68.120199] min_core_set_clock not set
 [    68.120199] Setting Deep Sleep Clock: 800
 [    68.120199] enable Low Memory PState.
 [    68.950219] min_core_set_clock not set
 [    68.950219] Setting Deep Sleep Clock: 800
 [    68.950219] enable Low Memory PState.
 [    68.960218] min_core_set_clock not set
 [    68.960218] Setting Deep Sleep Clock: 800
 [    68.960218] enable Low Memory PState.
 [    73.790434] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [    73.790434] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [    73.790434] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [    73.790434] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [    75.910382] min_core_set_clock not set
 [    75.910382] Setting Deep Sleep Clock: 800
 [    75.910382] enable Low Memory PState.
 [    75.910382] min_core_set_clock not set
 [    75.910382] Setting Deep Sleep Clock: 800
 [    75.910382] enable Low Memory PState.
 [    82.510537] min_core_set_clock not set
 [    82.510537] Setting Deep Sleep Clock: 800
 [    82.510537] enable Low Memory PState.
 [    82.520536] min_core_set_clock not set
 [    82.520536] Setting Deep Sleep Clock: 800
 [    82.520536] enable Low Memory PState.
 [   103.881036] min_core_set_clock not set
 [   103.881036] Setting Deep Sleep Clock: 800
 [   103.881036] enable Low Memory PState.
 [   103.891037] min_core_set_clock not set
 [   103.891037] Setting Deep Sleep Clock: 800
 [   103.891037] enable Low Memory PState.
 [   104.001142] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   104.001142] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   104.001142] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   104.001142] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   115.011298] min_core_set_clock not set
 [   115.011298] Setting Deep Sleep Clock: 800
 [   115.011298] enable Low Memory PState.
 [   115.011298] min_core_set_clock not set
 [   115.011298] Setting Deep Sleep Clock: 800
 [   115.011298] enable Low Memory PState.
 [   140.481895] min_core_set_clock not set
 [   140.481895] Setting Deep Sleep Clock: 800
 [   140.481895] enable Low Memory PState.
 [   140.481895] min_core_set_clock not set
 [   140.481895] Setting Deep Sleep Clock: 800
 [   140.481895] enable Low Memory PState.
 [   155.232240] min_core_set_clock not set
 [   155.232240] Setting Deep Sleep Clock: 800
 [   155.232240] enable Low Memory PState.
 [   155.242240] min_core_set_clock not set
 [   155.242240] Setting Deep Sleep Clock: 800
 [   155.242240] enable Low Memory PState.
 [   162.862522] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   162.862522] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   162.862522] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   162.862522] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   167.382627] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   167.382627] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   167.382627] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   167.382627] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   242.974296] min_core_set_clock not set
 [   242.974296] Setting Deep Sleep Clock: 800
 [   242.974296] enable Low Memory PState.
 [   242.984296] min_core_set_clock not set
 [   242.984296] Setting Deep Sleep Clock: 800
 [   242.984296] enable Low Memory PState.
 [   263.644781] min_core_set_clock not set
 [   263.644781] Setting Deep Sleep Clock: 800
 [   263.644781] enable Low Memory PState.
 [   263.654781] min_core_set_clock not set
 [   263.654781] Setting Deep Sleep Clock: 800
 [   263.654781] enable Low Memory PState.
 [   263.764784] min_core_set_clock not set
 [   263.764784] Setting Deep Sleep Clock: 800
 [   263.764784] enable Low Memory PState.
 [   263.774784] min_core_set_clock not set
 [   263.774784] Setting Deep Sleep Clock: 800
 [   263.774784] enable Low Memory PState.
 [   281.375197] min_core_set_clock not set
 [   281.375197] Setting Deep Sleep Clock: 800
 [   281.375197] enable Low Memory PState.
 [   281.375197] min_core_set_clock not set
 [   281.375197] Setting Deep Sleep Clock: 800
 [   281.375197] enable Low Memory PState.
 [   281.495199] min_core_set_clock not set
 [   281.495199] Setting Deep Sleep Clock: 800
 [   281.495199] enable Low Memory PState.
 [   281.495199] min_core_set_clock not set
 [   281.505199] Setting Deep Sleep Clock: 800
 [   281.505199] enable Low Memory PState.
 [   325.646233] min_core_set_clock not set
 [   325.656233] Setting Deep Sleep Clock: 800
 [   325.656233] enable Low Memory PState.
 [   325.656233] min_core_set_clock not set
 [   325.656233] Setting Deep Sleep Clock: 800
 [   325.656233] enable Low Memory PState.
 [   385.237629] min_core_set_clock not set
 [   385.237629] Setting Deep Sleep Clock: 800
 [   385.237629] enable Low Memory PState.
 [   385.247628] min_core_set_clock not set
 [   385.247628] Setting Deep Sleep Clock: 800
 [   385.247628] enable Low Memory PState.
 [   399.257957] min_core_set_clock not set
 [   399.267957] Setting Deep Sleep Clock: 800
 [   399.267957] enable Low Memory PState.
 [   399.267957] min_core_set_clock not set
 [   399.267957] Setting Deep Sleep Clock: 800
 [   399.267957] enable Low Memory PState.
 [   399.417961] min_core_set_clock not set
 [   399.417961] Setting Deep Sleep Clock: 800
 [   399.417961] enable Low Memory PState.
 [   399.417961] min_core_set_clock not set
 [   399.427961] Setting Deep Sleep Clock: 800
 [   399.427961] enable Low Memory PState.
 [   439.288895] min_core_set_clock not set
 [   439.288895] Setting Deep Sleep Clock: 800
 [   439.288895] enable Low Memory PState.
 [   439.299007] min_core_set_clock not set
 [   439.299007] Setting Deep Sleep Clock: 800
 [   439.299007] enable Low Memory PState.
 [   439.388898] min_core_set_clock not set
 [   439.388898] Setting Deep Sleep Clock: 800
 [   439.388898] enable Low Memory PState.
 [   439.908909] min_core_set_clock not set
 [   439.908909] Setting Deep Sleep Clock: 800
 [   439.908909] enable Low Memory PState.
 [   439.948911] min_core_set_clock not set
 [   439.948911] Setting Deep Sleep Clock: 800
 [   439.948911] enable Low Memory PState.
 [   439.948911] min_core_set_clock not set
 [   439.948911] Setting Deep Sleep Clock: 800
 [   439.948911] enable Low Memory PState.
 [   439.948911] min_core_set_clock not set
 [   439.948911] Setting Deep Sleep Clock: 800
 [   439.948911] enable Low Memory PState.
 [   439.948911] min_core_set_clock not set
 [   439.948911] Setting Deep Sleep Clock: 800
 [   439.948911] enable Low Memory PState.
 [   440.638929] min_core_set_clock not set
 [   440.638929] Setting Deep Sleep Clock: 800
 [   440.638929] enable Low Memory PState.
 [   440.638929] min_core_set_clock not set
 [   440.648930] Setting Deep Sleep Clock: 800
 [   440.648930] enable Low Memory PState.
 [   440.648930] min_core_set_clock not set
 [   440.648930] Setting Deep Sleep Clock: 800
 [   440.648930] enable Low Memory PState.
 [   440.648930] min_core_set_clock not set
 [   440.648930] Setting Deep Sleep Clock: 800
 [   440.648930] enable Low Memory PState.
 [   440.648930] min_core_set_clock not set
 [   440.648930] Setting Deep Sleep Clock: 800
 [   440.648930] enable Low Memory PState.
 [   440.758929] min_core_set_clock not set
 [   440.758929] Setting Deep Sleep Clock: 800
 [   440.758929] enable Low Memory PState.
 [   440.758929] min_core_set_clock not set
 [   440.758929] Setting Deep Sleep Clock: 800
 [   440.758929] enable Low Memory PState.
 [   441.388944] min_core_set_clock not set
 [   441.388944] Setting Deep Sleep Clock: 800
 [   441.388944] enable Low Memory PState.
 [   441.428945] min_core_set_clock not set
 [   441.428945] Setting Deep Sleep Clock: 800
 [   441.428945] enable Low Memory PState.
 [   441.428945] min_core_set_clock not set
 [   441.428945] Setting Deep Sleep Clock: 800
 [   441.428945] enable Low Memory PState.
 [   450.539263] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   450.539263] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   450.539263] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   450.539263] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   452.049297] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   452.049297] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   452.049297] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   452.049297] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   471.809658] min_core_set_clock not set
 [   471.819658] Setting Deep Sleep Clock: 800
 [   471.819658] enable Low Memory PState.
 [   471.819658] min_core_set_clock not set
 [   471.819658] Setting Deep Sleep Clock: 800
 [   471.819658] enable Low Memory PState.
 [   471.919661] min_core_set_clock not set
 [   471.919661] Setting Deep Sleep Clock: 800
 [   471.919661] enable Low Memory PState.
 [   472.439672] min_core_set_clock not set
 [   472.439672] Setting Deep Sleep Clock: 800
 [   472.439672] enable Low Memory PState.
 [   472.469673] min_core_set_clock not set
 [   472.469673] Setting Deep Sleep Clock: 800
 [   472.469673] enable Low Memory PState.
 [   472.469673] min_core_set_clock not set
 [   472.469673] Setting Deep Sleep Clock: 800
 [   472.469673] enable Low Memory PState.
 [   472.469673] min_core_set_clock not set
 [   472.469673] Setting Deep Sleep Clock: 800
 [   472.469673] enable Low Memory PState.
 [   472.469673] min_core_set_clock not set
 [   472.469673] Setting Deep Sleep Clock: 800
 [   472.469673] enable Low Memory PState.
 [   473.139692] min_core_set_clock not set
 [   473.139692] Setting Deep Sleep Clock: 800
 [   473.139692] enable Low Memory PState.
 [   473.139692] min_core_set_clock not set
 [   473.139692] Setting Deep Sleep Clock: 800
 [   473.139692] enable Low Memory PState.
 [   473.139692] min_core_set_clock not set
 [   473.139692] Setting Deep Sleep Clock: 800
 [   473.139692] enable Low Memory PState.
 [   473.139692] min_core_set_clock not set
 [   473.139692] Setting Deep Sleep Clock: 800
 [   473.139692] enable Low Memory PState.
 [   473.139692] min_core_set_clock not set
 [   473.149690] Setting Deep Sleep Clock: 800
 [   473.149690] enable Low Memory PState.
 [   480.559862] min_core_set_clock not set
 [   480.559862] Setting Deep Sleep Clock: 800
 [   480.559862] enable Low Memory PState.
 [   480.559862] min_core_set_clock not set
 [   480.559862] Setting Deep Sleep Clock: 800
 [   480.559862] enable Low Memory PState.
 [   481.189877] min_core_set_clock not set
 [   481.189877] Setting Deep Sleep Clock: 800
 [   481.189877] enable Low Memory PState.
 [   481.219878] min_core_set_clock not set
 [   481.219878] Setting Deep Sleep Clock: 800
 [   481.219878] enable Low Memory PState.
 [   481.229878] min_core_set_clock not set
 [   481.229878] Setting Deep Sleep Clock: 800
 [   481.229878] enable Low Memory PState.
 [   482.340008] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   482.340008] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   482.340008] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   482.340008] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   494.190285] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   494.190285] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   494.190285] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   494.190285] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   506.510471] min_core_set_clock not set
 [   506.510471] Setting Deep Sleep Clock: 800
 [   506.510471] enable Low Memory PState.
 [   506.520471] min_core_set_clock not set
 [   506.520471] Setting Deep Sleep Clock: 800
 [   506.520471] enable Low Memory PState.
 [   506.670475] min_core_set_clock not set
 [   506.670475] Setting Deep Sleep Clock: 800
 [   506.670475] enable Low Memory PState.
 [   507.180486] min_core_set_clock not set
 [   507.180486] Setting Deep Sleep Clock: 800
 [   507.180486] enable Low Memory PState.
 [   507.220487] min_core_set_clock not set
 [   507.220487] Setting Deep Sleep Clock: 800
 [   507.220487] enable Low Memory PState.
 [   507.220487] min_core_set_clock not set
 [   507.220487] Setting Deep Sleep Clock: 800
 [   507.220487] enable Low Memory PState.
 [   507.220487] min_core_set_clock not set
 [   507.220487] Setting Deep Sleep Clock: 800
 [   507.220487] enable Low Memory PState.
 [   507.220487] min_core_set_clock not set
 [   507.220487] Setting Deep Sleep Clock: 800
 [   507.220487] enable Low Memory PState.
 [   507.870504] min_core_set_clock not set
 [   507.870504] Setting Deep Sleep Clock: 800
 [   507.870504] enable Low Memory PState.
 [   507.870504] min_core_set_clock not set
 [   507.870504] Setting Deep Sleep Clock: 800
 [   507.870504] enable Low Memory PState.
 [   507.870504] min_core_set_clock not set
 [   507.870504] Setting Deep Sleep Clock: 800
 [   507.870504] enable Low Memory PState.
 [   507.870504] min_core_set_clock not set
 [   507.870504] Setting Deep Sleep Clock: 800
 [   507.870504] enable Low Memory PState.
 [   507.870504] min_core_set_clock not set
 [   507.880504] Setting Deep Sleep Clock: 800
 [   507.880504] enable Low Memory PState.
 [   516.770814] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   516.770814] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   516.770814] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   516.770814] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   522.790854] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   522.790854] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   522.790854] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   522.790854] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   524.290991] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   524.290991] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   524.290991] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   524.290991] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   531.821064] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   531.821064] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   531.821064] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   531.821064] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   533.321098] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   533.321098] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   533.321098] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   533.321098] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   552.891656] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   552.891656] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   552.891656] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   552.891656] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   564.961834] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   564.961834] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   564.961834] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   564.961834] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   572.492012] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   572.492012] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   572.492012] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   572.492012] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   584.552294] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   584.552294] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   584.552294] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   584.552294] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   593.612507] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   593.612507] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   593.612507] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   593.612507] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   595.132540] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   595.132540] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   595.132540] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   595.132540] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   605.692890] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   605.692890] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   605.692890] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   605.692890] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   611.733032] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   611.733032] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   611.733032] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   611.733032] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   620.783244] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   620.783244] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   620.783244] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   620.783244] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   628.343320] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   628.343320] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   628.343320] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   628.343320] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   646.473745] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   646.473745] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   646.473745] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   646.473745] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   658.564129] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   658.564129] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   658.564129] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   658.564129] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   666.114306] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   666.114306] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   666.114306] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   666.114306] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   673.674382] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   673.674382] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   673.674382] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   673.674382] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   679.714625] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   679.714625] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   679.714625] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   679.714625] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   726.535621] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   726.535621] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   726.535621] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   726.535621] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   740.116041] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   740.116041] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   740.116041] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   740.116041] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   768.796714] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   768.796714] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   768.796714] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   768.796714] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   792.937278] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   792.937278] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   792.937278] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   792.937278] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   815.597708] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   815.597708] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   815.597708] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   815.597708] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   838.238340] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   838.238340] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   838.238340] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   838.238340] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   842.768447] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   842.768447] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   842.768447] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   842.768447] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   863.918943] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   863.918943] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   863.918943] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   863.918943] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   909.189902] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   909.189902] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   909.189902] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   909.189902] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   943.900717] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   943.900717] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   943.900717] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   943.900717] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   948.430923] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   948.430923] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   948.430923] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   948.430923] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   957.481135] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   957.481135] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   957.481135] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   957.481135] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   986.191808] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   986.191808] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   986.191808] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   986.191808] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   995.262021] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [   995.262021] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   995.262021] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [   995.262021] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1076.763830] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [  1076.763830] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1076.763830] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1076.763830] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1102.424532] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [  1102.424532] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1102.424532] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1102.424532] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1122.064992] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [  1122.064992] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1122.064992] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1122.064992] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1134.145274] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [  1134.145274] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1134.145274] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1134.145274] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1155.275771] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [  1155.275771] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1155.275771] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1155.275771] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1161.305911] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [  1161.305911] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1161.305911] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1161.305911] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1176.406163] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [  1176.406163] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1176.406163] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1176.406163] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1218.707257] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [  1218.707257] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1218.707257] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1218.707257] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1227.777369] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [  1227.777369] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1227.777369] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1227.777369] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1236.847682] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [  1236.847682] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1236.847682] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1236.847682] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1348.630302] Firmware Error (ACPI): Could not resolve symbol [\_PR.C002.PPCV], AE_NOT_FOUND (20221020/psargs-395)
 [  1348.630302] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.APCL due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1348.630302] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0.PCLK due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 [  1348.630302] ACPI Error: Aborting method \_SB.PCI0.LPC0.EC0._Q1D due to previous error (AE_NOT_FOUND) (20221020/psparse-580)
 
 --bzdvejfuwolmzzhv
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: attachment; filename="xorg.conf.lenovo.amdgpu"
 
 Section "ServerLayout"
 	Identifier     "X.org Configured"
 	Screen      0  "Screen0" 0 0
 	Screen      1  "Screen1" RightOf "Screen0"
 	InputDevice    "Mouse0" "CorePointer"
 	InputDevice    "Keyboard0" "CoreKeyboard"
 EndSection
 
 Section "Files"
 	ModulePath   "/usr/pkg/lib/xorg/modules"
 	FontPath     "/usr/pkg/share/fonts/X11/misc"
 	FontPath     "/usr/pkg/share/fonts/X11/TTF"
 	FontPath     "/usr/pkg/share/fonts/X11/OTF"
 	FontPath     "/usr/pkg/share/fonts/X11/Type1"
 	FontPath     "/usr/pkg/share/fonts/X11/100dpi"
 	FontPath     "/usr/pkg/share/fonts/X11/75dpi"
 	FontPath     "/usr/pkg/share/fonts/X11/cyrillic"
 	FontPath     "/usr/pkg/lib/X11/fonts/misc"
 	FontPath     "/usr/pkg/lib/X11/fonts/TTF"
 	FontPath     "/usr/pkg/lib/X11/fonts/OTF"
 	FontPath     "/usr/pkg/lib/X11/fonts/Type1"
 	FontPath     "/usr/pkg/lib/X11/fonts/100dpi"
 	FontPath     "/usr/pkg/lib/X11/fonts/75dpi"
 	FontPath     "/usr/pkg/lib/X11/fonts/cyrillic"
 EndSection
 
 Section "Module"
 	Load  "glx"
 EndSection
 
 Section "InputDevice"
 	Identifier  "Keyboard0"
 	Driver      "kbd"
 EndSection
 
 Section "InputDevice"
 	Identifier  "Mouse0"
 	Driver      "mouse"
 	Option	    "Protocol" "wsmouse"
 	Option	    "Device" "/dev/wsmouse"
 	Option	    "ZAxisMapping" "4 5 6 7"
 EndSection
 
 Section "Monitor"
 	Identifier   "Monitor0"
 	VendorName   "Monitor Vendor"
 	ModelName    "Monitor Model"
 EndSection
 
 Section "Monitor"
 	Identifier   "Monitor1"
 	VendorName   "Monitor Vendor"
 	ModelName    "Monitor Model"
 EndSection
 
 Section "Device"
         ### Available Driver options are:-
         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
         ### <percent>: "<f>%"
         ### [arg]: arg optional
         #Option     "Accel"              	# [<bool>]
         #Option     "SWcursor"           	# [<bool>]
         #Option     "EnablePageFlip"     	# [<bool>]
         #Option     "SubPixelOrder"      	# [<str>]
         #Option     "ZaphodHeads"        	# <str>
         #Option     "AccelMethod"        	# <str>
         #Option     "DRI3"               	# [<bool>]
         #Option     "DRI"                	# <i>
         #Option     "ShadowPrimary"      	# [<bool>]
         #Option     "TearFree"           	# [<bool>]
         #Option     "DeleteUnusedDP12Displays" 	# [<bool>]
         #Option     "VariableRefresh"    	# [<bool>]
         #Option     "AsyncFlipSecondaries" 	# [<bool>]
 	Identifier  "Card0"
 	Driver      "amdgpu"
 	BusID       "PCI:0:1:0"
 EndSection
 
 Section "Device"
         ### Available Driver options are:-
         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
         ### <percent>: "<f>%"
         ### [arg]: arg optional
         #Option     "Accel"              	# [<bool>]
         #Option     "SWcursor"           	# [<bool>]
         #Option     "EnablePageFlip"     	# [<bool>]
         #Option     "SubPixelOrder"      	# [<str>]
         #Option     "ZaphodHeads"        	# <str>
         #Option     "AccelMethod"        	# <str>
         #Option     "DRI3"               	# [<bool>]
         #Option     "DRI"                	# <i>
         #Option     "ShadowPrimary"      	# [<bool>]
         #Option     "TearFree"           	# [<bool>]
         #Option     "DeleteUnusedDP12Displays" 	# [<bool>]
         #Option     "VariableRefresh"    	# [<bool>]
         #Option     "AsyncFlipSecondaries" 	# [<bool>]
 	Identifier  "Card1"
 	Driver      "amdgpu"
 	BusID       "PCI:0:1:1"
 EndSection
 
 Section "Screen"
 	Identifier "Screen0"
 	Device     "Card0"
 	Monitor    "Monitor0"
 	SubSection "Display"
 		Viewport   0 0
 		Depth     1
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     4
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     8
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     15
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     16
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     24
 	EndSubSection
 EndSection
 
 Section "Screen"
 	Identifier "Screen1"
 	Device     "Card1"
 	Monitor    "Monitor1"
 	SubSection "Display"
 		Viewport   0 0
 		Depth     1
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     4
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     8
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     15
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     16
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     24
 	EndSubSection
 EndSection
 
 
 --bzdvejfuwolmzzhv
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: attachment; filename="Xorg.0.log.lenovo.amdgpu"
 
 [   505.495] 
 X.Org X Server 1.21.1.6
 X Protocol Version 11, Revision 0
 [   505.495] Current Operating System: NetBSD lenovon 10.0_BETA NetBSD 10.0_BETA (MYKERNEL) #0: Fri Dec 30 23:04:04 IST 2022  root@lenovon:/usr/src/sys/arch/amd64/compile/MYKERNEL amd64
 [   505.496]  
 [   505.496] Current version of pixman: 0.42.2
 [   505.496] 	Before reporting problems, check http://wiki.x.org
 	to make sure that you have the latest version.
 [   505.496] Markers: (--) probed, (**) from config file, (==) default setting,
 	(++) from command line, (!!) notice, (II) informational,
 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
 [   505.496] (==) Log file: "/usr/pkg/var/log/Xorg.0.log", Time: Fri Dec 30 23:42:34 2022
 [   505.496] (==) Using config file: "/usr/pkg/etc/X11/xorg.conf"
 [   505.496] (==) Using system config directory "/usr/pkg/share/X11/xorg.conf.d"
 [   505.496] (==) ServerLayout "X.org Configured"
 [   505.496] (**) |-->Screen "Screen0" (0)
 [   505.496] (**) |   |-->Monitor "Monitor0"
 [   505.497] (**) |   |-->Device "Card0"
 [   505.497] (**) |-->Screen "Screen1" (1)
 [   505.497] (**) |   |-->Monitor "Monitor1"
 [   505.497] (**) |   |-->Device "Card1"
 [   505.497] (**) |-->Input Device "Mouse0"
 [   505.497] (**) |-->Input Device "Keyboard0"
 [   505.497] (==) Not automatically adding devices
 [   505.497] (==) Not automatically enabling devices
 [   505.497] (==) Not automatically adding GPU devices
 [   505.497] (==) Automatically binding GPU devices
 [   505.497] (==) Max clients allowed: 256, resource mask: 0x1fffff
 [   505.497] (WW) The directory "/usr/pkg/share/fonts/X11/OTF" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) `fonts.dir' not found (or not valid) in "/usr/pkg/share/fonts/X11/cyrillic".
 [   505.497] 	Entry deleted from font path.
 [   505.497] 	(Run 'mkfontdir' on "/usr/pkg/share/fonts/X11/cyrillic").
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/misc" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/TTF" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/OTF" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/Type1" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/100dpi" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/75dpi" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/cyrillic" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) The directory "/usr/pkg/share/fonts/X11/OTF" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) `fonts.dir' not found (or not valid) in "/usr/pkg/share/fonts/X11/cyrillic".
 [   505.497] 	Entry deleted from font path.
 [   505.497] 	(Run 'mkfontdir' on "/usr/pkg/share/fonts/X11/cyrillic").
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/misc" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/TTF" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/OTF" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/Type1" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/100dpi" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/75dpi" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (WW) The directory "/usr/pkg/lib/X11/fonts/cyrillic" does not exist.
 [   505.497] 	Entry deleted from font path.
 [   505.497] (**) FontPath set to:
 	/usr/pkg/share/fonts/X11/misc,
 	/usr/pkg/share/fonts/X11/TTF,
 	/usr/pkg/share/fonts/X11/Type1,
 	/usr/pkg/share/fonts/X11/100dpi,
 	/usr/pkg/share/fonts/X11/75dpi,
 	/usr/pkg/share/fonts/X11/misc,
 	/usr/pkg/share/fonts/X11/TTF,
 	/usr/pkg/share/fonts/X11/Type1,
 	/usr/pkg/share/fonts/X11/100dpi,
 	/usr/pkg/share/fonts/X11/75dpi
 [   505.497] (**) ModulePath set to "/usr/pkg/lib/xorg/modules"
 [   505.497] (II) Loader magic: 0x1b842dc40
 [   505.497] (II) Module ABI versions:
 [   505.498] 	X.Org ANSI C Emulation: 0.4
 [   505.498] 	X.Org Video Driver: 25.2
 [   505.498] 	X.Org XInput driver : 24.4
 [   505.498] 	X.Org Server Extension : 10.0
 [   505.500] (--) PCI:*(0@0:1:0) 1002:98e4:17aa:39f5 rev 234, Mem @ 0xe0000000/268435456, 0xf0800000/8388608, 0xf0400000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
 [   505.500] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
 [   505.500] (II) LoadModule: "glx"
 [   505.501] (II) Loading /usr/pkg/lib/xorg/modules/extensions/libglx.so
 [   505.523] (II) Module glx: vendor="X.Org Foundation"
 [   505.523] 	compiled for 1.21.1.6, module version = 1.0.0
 [   505.523] 	ABI class: X.Org Server Extension, version 10.0
 [   505.523] (II) LoadModule: "amdgpu"
 [   505.523] (II) Loading /usr/pkg/lib/xorg/modules/drivers/amdgpu_drv.so
 [   505.524] (II) Module amdgpu: vendor="X.Org Foundation"
 [   505.524] 	compiled for 1.21.1.6, module version = 22.0.0
 [   505.524] 	Module class: X.Org Video Driver
 [   505.524] 	ABI class: X.Org Video Driver, version 25.2
 [   505.524] (II) LoadModule: "mouse"
 [   505.524] (II) Loading /usr/pkg/lib/xorg/modules/input/mouse_drv.so
 [   505.524] (II) Module mouse: vendor="X.Org Foundation"
 [   505.524] 	compiled for 1.21.1.4, module version = 1.9.4
 [   505.524] 	Module class: X.Org XInput Driver
 [   505.524] 	ABI class: X.Org XInput driver, version 24.4
 [   505.524] (II) LoadModule: "kbd"
 [   505.525] (II) Loading /usr/pkg/lib/xorg/modules/input/kbd_drv.so
 [   505.525] (II) Module kbd: vendor="X.Org Foundation"
 [   505.525] 	compiled for 1.21.1.4, module version = 2.0.0
 [   505.525] 	Module class: X.Org XInput Driver
 [   505.525] 	ABI class: X.Org XInput driver, version 24.4
 [   505.525] (II) AMDGPU: Driver for AMD Radeon:
 	All GPUs supported by the amdgpu kernel driver
 [   505.525] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
 [   505.531] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
 [   505.533] (II) AMDGPU(1): [KMS] Kernel modesetting enabled.
 [   505.533] (EE) AMDGPU(1): [drm] Failed to open DRM device for pci:0000:00:01.1: Operation not supported by device
 [   505.533] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
 [   505.533] (EE) Screen 1 deleted because of no matching config section.
 [   505.533] (II) UnloadModule: "amdgpu"
 [   505.533] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
 [   505.533] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
 [   505.533] (==) AMDGPU(0): Default visual is TrueColor
 [   505.533] (==) AMDGPU(0): RGB weight 888
 [   505.533] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
 [   505.533] (--) AMDGPU(0): Chipset: "AMD Radeon R4 Graphics" (ChipID = 0x98e4)
 [   505.533] (II) Loading sub module "fb"
 [   505.533] (II) LoadModule: "fb"
 [   505.533] (II) Module "fb" already built-in
 [   505.533] (II) Loading sub module "dri2"
 [   505.533] (II) LoadModule: "dri2"
 [   505.533] (II) Module "dri2" already built-in
 [   505.544] (II) Loading sub module "glamoregl"
 [   505.544] (II) LoadModule: "glamoregl"
 [   505.544] (II) Loading /usr/pkg/lib/xorg/modules/libglamoregl.so
 [   505.595] (II) Module glamoregl: vendor="X.Org Foundation"
 [   505.595] 	compiled for 1.21.1.6, module version = 1.0.1
 [   505.595] 	ABI class: X.Org ANSI C Emulation, version 0.4
 [   505.643] (II) AMDGPU(0): glamor X acceleration enabled on softpipe
 [   505.643] (II) AMDGPU(0): glamor detected, initialising EGL layer.
 [   505.643] (==) AMDGPU(0): TearFree property default: auto
 [   505.643] (==) AMDGPU(0): VariableRefresh: disabled
 [   505.643] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
 [   505.643] (II) AMDGPU(0): KMS Pageflipping: enabled
 [   505.648] (II) AMDGPU(0): Output eDP using monitor section Monitor0
 [   505.687] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
 [   505.692] (II) AMDGPU(0): EDID for output eDP
 [   505.692] (II) AMDGPU(0): Manufacturer: AUO  Model: 71ec  Serial#: 0
 [   505.692] (II) AMDGPU(0): Year: 2015  Week: 24
 [   505.692] (II) AMDGPU(0): EDID Version: 1.4
 [   505.692] (II) AMDGPU(0): Digital Display Input
 [   505.692] (II) AMDGPU(0): 6 bits per channel
 [   505.692] (II) AMDGPU(0): Digital interface is DisplayPort
 [   505.692] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 34  vert.: 19
 [   505.692] (II) AMDGPU(0): Gamma: 2.20
 [   505.692] (II) AMDGPU(0): No DPMS capabilities specified
 [   505.692] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 
 [   505.692] (II) AMDGPU(0): First detailed timing is preferred mode
 [   505.692] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
 [   505.692] (II) AMDGPU(0): redX: 0.575 redY: 0.345   greenX: 0.340 greenY: 0.570
 [   505.692] (II) AMDGPU(0): blueX: 0.160 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
 [   505.692] (II) AMDGPU(0): Manufacturer's mask: 0
 [   505.692] (II) AMDGPU(0): Supported detailed timing:
 [   505.692] (II) AMDGPU(0): clock: 76.3 MHz   Image Size:  344 x 193 mm
 [   505.692] (II) AMDGPU(0): h_active: 1366  h_sync: 1374  h_sync_end 1384 h_blank_end 1558 h_border: 0
 [   505.692] (II) AMDGPU(0): v_active: 768  v_sync: 771  v_sync_end 772 v_blanking: 816 v_border: 0
 [   505.692] (II) AMDGPU(0): Unknown vendor-specific block f
 [   505.692] (II) AMDGPU(0):  AUO
 [   505.692] (II) AMDGPU(0):  B156XTN07.1
 [   505.692] (II) AMDGPU(0): EDID (in hex):
 [   505.692] (II) AMDGPU(0): 	00ffffffffffff0006afec7100000000
 [   505.692] (II) AMDGPU(0): 	18190104952213780250259358579229
 [   505.692] (II) AMDGPU(0): 	22505400000001010101010101010101
 [   505.692] (II) AMDGPU(0): 	010101010101ce1d56c050003030080a
 [   505.692] (II) AMDGPU(0): 	310058c1100000180000000f00000000
 [   505.692] (II) AMDGPU(0): 	00000000000000000020000000fe0041
 [   505.692] (II) AMDGPU(0): 	554f0a202020202020202020000000fe
 [   505.692] (II) AMDGPU(0): 	004231353658544e30372e31200a00fb
 [   505.692] (II) AMDGPU(0): Printing probed modes for output eDP
 [   505.692] (II) AMDGPU(0): Modeline "1366x768"x60.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
 [   505.692] (II) AMDGPU(0): Modeline "1280x720"x60.0   74.65  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.9 kHz)
 [   505.692] (II) AMDGPU(0): Modeline "1152x768"x59.9   71.95  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.8 kHz)
 [   505.692] (II) AMDGPU(0): Modeline "1024x768"x59.9   63.53  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
 [   505.692] (II) AMDGPU(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
 [   505.692] (II) AMDGPU(0): Modeline "848x480"x59.9   31.65  848 872 952 1056  480 483 493 500 -hsync +vsync (30.0 kHz)
 [   505.692] (II) AMDGPU(0): Modeline "720x480"x59.9   26.85  720 744 808 896  480 483 493 500 -hsync +vsync (30.0 kHz)
 [   505.692] (II) AMDGPU(0): Modeline "640x480"x59.9   23.98  640 664 720 800  480 483 487 500 -hsync +vsync (30.0 kHz)
 [   505.731] (II) AMDGPU(0): EDID for output HDMI-A-0
 [   505.731] (II) AMDGPU(0): Manufacturer: DEL  Model: a0dc  Serial#: 860566338
 [   505.731] (II) AMDGPU(0): Year: 2018  Week: 12
 [   505.731] (II) AMDGPU(0): EDID Version: 1.3
 [   505.731] (II) AMDGPU(0): Digital Display Input
 [   505.731] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 53  vert.: 30
 [   505.731] (II) AMDGPU(0): Gamma: 2.20
 [   505.731] (II) AMDGPU(0): DPMS capabilities: StandBy Suspend Off
 [   505.731] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
 [   505.732] (II) AMDGPU(0): First detailed timing is preferred mode
 [   505.732] (II) AMDGPU(0): redX: 0.652 redY: 0.336   greenX: 0.321 greenY: 0.610
 [   505.732] (II) AMDGPU(0): blueX: 0.153 blueY: 0.061   whiteX: 0.313 whiteY: 0.329
 [   505.732] (II) AMDGPU(0): Supported established timings:
 [   505.732] (II) AMDGPU(0): 720x400@70Hz
 [   505.732] (II) AMDGPU(0): 640x480@60Hz
 [   505.732] (II) AMDGPU(0): 640x480@75Hz
 [   505.732] (II) AMDGPU(0): 800x600@60Hz
 [   505.732] (II) AMDGPU(0): 800x600@75Hz
 [   505.732] (II) AMDGPU(0): 1024x768@60Hz
 [   505.732] (II) AMDGPU(0): 1024x768@75Hz
 [   505.732] (II) AMDGPU(0): 1280x1024@75Hz
 [   505.732] (II) AMDGPU(0): Manufacturer's mask: 0
 [   505.732] (II) AMDGPU(0): Supported standard timings:
 [   505.732] (II) AMDGPU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
 [   505.732] (II) AMDGPU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
 [   505.732] (II) AMDGPU(0): #2: hsize: 1600  vsize 900  refresh: 60  vid: 49321
 [   505.732] (II) AMDGPU(0): #3: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
 [   505.732] (II) AMDGPU(0): Supported detailed timing:
 [   505.732] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  527 x 296 mm
 [   505.732] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
 [   505.732] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
 [   505.732] (II) AMDGPU(0): Serial No: 9PYW683L3K3B
 [   505.732] (II) AMDGPU(0): Monitor name: DELL P2417H
 [   505.732] (II) AMDGPU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
 [   505.732] (II) AMDGPU(0): Supported detailed timing:
 [   505.732] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  527 x 296 mm
 [   505.732] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
 [   505.732] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
 [   505.732] (II) AMDGPU(0): Supported detailed timing:
 [   505.732] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  527 x 296 mm
 [   505.732] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
 [   505.732] (II) AMDGPU(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
 [   505.732] (II) AMDGPU(0): Supported detailed timing:
 [   505.732] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  527 x 296 mm
 [   505.732] (II) AMDGPU(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
 [   505.732] (II) AMDGPU(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
 [   505.732] (II) AMDGPU(0): Supported detailed timing:
 [   505.732] (II) AMDGPU(0): clock: 27.0 MHz   Image Size:  527 x 296 mm
 [   505.732] (II) AMDGPU(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
 [   505.732] (II) AMDGPU(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
 [   505.732] (II) AMDGPU(0): Number of EDID sections to follow: 1
 [   505.732] (II) AMDGPU(0): EDID (in hex):
 [   505.732] (II) AMDGPU(0): 	00ffffffffffff0010acdca042334b33
 [   505.732] (II) AMDGPU(0): 	0c1c010380351e78ea0565a756529c27
 [   505.732] (II) AMDGPU(0): 	0f5054a54b00714f8180a9c0d1c00101
 [   505.732] (II) AMDGPU(0): 	010101010101023a801871382d40582c
 [   505.732] (II) AMDGPU(0): 	45000f282100001e000000ff00395059
 [   505.732] (II) AMDGPU(0): 	573638334c334b33420a000000fc0044
 [   505.732] (II) AMDGPU(0): 	454c4c205032343137480a20000000fd
 [   505.732] (II) AMDGPU(0): 	00384c1e5311000a20202020202001b2
 [   505.732] (II) AMDGPU(0): 	020317b14c9005040302071601141f12
 [   505.732] (II) AMDGPU(0): 	1365030c001000023a801871382d4058
 [   505.732] (II) AMDGPU(0): 	2c45000f282100001e011d8018711c16
 [   505.732] (II) AMDGPU(0): 	20582c25000f282100009e011d007251
 [   505.732] (II) AMDGPU(0): 	d01e206e2855000f282100001e8c0ad0
 [   505.732] (II) AMDGPU(0): 	8a20e02d10103e96000f282100001800
 [   505.732] (II) AMDGPU(0): 	00000000000000000000000000000000
 [   505.732] (II) AMDGPU(0): 	0000000000000000000000000000003d
 [   505.732] (II) AMDGPU(0): Printing probed modes for output HDMI-A-0
 [   505.732] (II) AMDGPU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
 [   505.732] (II) AMDGPU(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "720x576i"x50.0   13.50  720 732 795 864  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
 [   505.732] (II) AMDGPU(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
 [   505.733] (II) AMDGPU(0): Modeline "720x480i"x60.0   13.51  720 739 801 858  480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
 [   505.733] (II) AMDGPU(0): Modeline "720x480i"x59.9   13.50  720 739 801 858  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
 [   505.733] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
 [   505.733] (II) AMDGPU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
 [   505.733] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
 [   505.733] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
 [   505.733] (II) AMDGPU(0): Output eDP connected
 [   505.733] (II) AMDGPU(0): Output HDMI-A-0 connected
 [   505.733] (II) AMDGPU(0): Using spanning desktop for initial modes
 [   505.733] (II) AMDGPU(0): Output eDP using initial mode 1366x768 +0+0
 [   505.733] (II) AMDGPU(0): Output HDMI-A-0 using initial mode 1920x1080 +1366+0
 [   505.733] (II) AMDGPU(0): mem size init: gart size :bfd7a000 vram size: s:1f362000 visible:1f362000
 [   505.733] (==) AMDGPU(0): DPI set to (96, 96)
 [   505.733] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
 [   505.733] (II) Loading sub module "ramdac"
 [   505.733] (II) LoadModule: "ramdac"
 [   505.733] (II) Module "ramdac" already built-in
 [   505.733] (II) AMDGPU(0): [DRI2] Setup complete
 [   505.733] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
 [   505.733] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
 [   505.733] (II) AMDGPU(0): Front buffer pitch: 13312 bytes
 [   505.733] (II) AMDGPU(0): SYNC extension fences enabled
 [   505.733] (II) AMDGPU(0): Present extension enabled
 [   505.733] (==) AMDGPU(0): DRI3 enabled
 [   505.733] (==) AMDGPU(0): Backing store enabled
 [   505.733] (II) AMDGPU(0): Direct rendering enabled
 [   505.774] (II) AMDGPU(0): Use GLAMOR acceleration.
 [   505.774] (II) AMDGPU(0): Acceleration enabled
 [   505.774] (==) AMDGPU(0): DPMS enabled
 [   505.774] (==) AMDGPU(0): Silken mouse enabled
 [   505.774] (II) AMDGPU(0): Set up textured video (glamor)
 [   505.774] (II) Initializing extension Generic Event Extension
 [   505.774] (II) Initializing extension SHAPE
 [   505.774] (II) Initializing extension MIT-SHM
 [   505.775] (II) Initializing extension XInputExtension
 [   505.775] (II) Initializing extension XTEST
 [   505.775] (II) Initializing extension BIG-REQUESTS
 [   505.775] (II) Initializing extension SYNC
 [   505.775] (II) Initializing extension XKEYBOARD
 [   505.775] (II) Initializing extension XC-MISC
 [   505.775] (II) Initializing extension XFIXES
 [   505.775] (II) Initializing extension RENDER
 [   505.775] (II) Initializing extension RANDR
 [   505.775] (II) Initializing extension COMPOSITE
 [   505.775] (II) Initializing extension DAMAGE
 [   505.775] (II) Initializing extension MIT-SCREEN-SAVER
 [   505.775] (II) Initializing extension DOUBLE-BUFFER
 [   505.775] (II) Initializing extension RECORD
 [   505.775] (II) Initializing extension DPMS
 [   505.775] (II) Initializing extension Present
 [   505.775] (II) Initializing extension DRI3
 [   505.775] (II) Initializing extension X-Resource
 [   505.775] (II) Initializing extension XVideo
 [   505.775] (II) Initializing extension XVideo-MotionCompensation
 [   505.775] (II) Initializing extension GLX
 [   505.775] (EE) AIGLX error: dlopen of /usr/pkg/lib/dri/radeonsi_dri.so failed (Cannot open "/usr/pkg/lib/dri/radeonsi_dri.so")
 [   505.775] (EE) AIGLX error: unable to load driver radeonsi
 [   505.780] (II) IGLX: Loaded and initialized swrast
 [   505.780] (II) GLX: Initialized DRISWRAST GL provider for screen 0
 [   505.780] (II) Initializing extension XFree86-VidModeExtension
 [   505.780] (II) Initializing extension XFree86-DGA
 [   505.780] (II) Initializing extension XFree86-DRI
 [   505.780] (II) Initializing extension DRI2
 [   505.780] (II) AMDGPU(0): Setting screen physical size to 869 x 285
 [   506.564] (II) Using input driver 'mouse' for 'Mouse0'
 [   506.564] (**) Option "CorePointer"
 [   506.564] (**) Mouse0: always reports core events
 [   506.565] (**) Option "Protocol" "wsmouse"
 [   506.565] (**) Option "Device" "/dev/wsmouse"
 [   506.565] (**) Mouse0: Protocol: "wsmouse"
 [   506.565] (**) Mouse0: always reports core events
 [   506.571] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
 [   506.571] (**) Option "ZAxisMapping" "4 5 6 7"
 [   506.571] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
 [   506.571] (**) Mouse0: Buttons: 11
 [   506.571] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6)
 [   506.571] (**) Mouse0: (accel) keeping acceleration scheme 1
 [   506.571] (**) Mouse0: (accel) acceleration profile 0
 [   506.571] (**) Mouse0: (accel) acceleration factor: 2.000
 [   506.571] (**) Mouse0: (accel) acceleration threshold: 4
 [   506.574] (II) Using input driver 'kbd' for 'Keyboard0'
 [   506.574] (**) Option "CoreKeyboard"
 [   506.574] (**) Keyboard0: always reports core events
 [   506.574] (**) Keyboard0: always reports core events
 [   506.574] (**) Option "Protocol" "standard"
 [   506.574] (**) Option "XkbRules" "base"
 [   506.574] (**) Option "XkbModel" "pc105"
 [   506.574] (**) Option "XkbLayout" "us"
 [   506.574] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 7)
 [   506.598] (II) AMDGPU(0): EDID vendor "AUO", prod id 29164
 [   506.598] (II) AMDGPU(0): Printing DDC gathered Modelines:
 [   506.598] (II) AMDGPU(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
 [   506.675] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counter
 [   507.224] (EE) AMDGPU(0): drmmode_do_crtc_dpms cannot get last vblank counter
 [   507.227] (II) AMDGPU(0): Allocate new frame buffer 1920x1080
 [   507.227] (II) AMDGPU(0):  => pitch 7680 bytes
 [   508.625] (II) AMDGPU(0): EDID vendor "AUO", prod id 29164
 [   508.625] (II) AMDGPU(0): Printing DDC gathered Modelines:
 [   508.625] (II) AMDGPU(0): Modeline "1366x768"x0.0   76.30  1366 1374 1384 1558  768 771 772 816 -hsync -vsync (49.0 kHz eP)
 
 --bzdvejfuwolmzzhv--
 


Home | Main Index | Thread Index | Old Index