Re: kern/57794: only a small area of the touchpad works after kernel update

To: kern-bug-people%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,guilherme.janczak%yandex.com@localhost
Subject: Re: kern/57794: only a small area of the touchpad works after kernel update
From: Guilherme Janczak <guilherme.janczak%yandex.com@localhost>
Date: Tue, 26 Dec 2023 17:20:01 +0000 (UTC)
The following reply was made to PR kern/57794; it has been noted by GNATS.

From: Guilherme Janczak <guilherme.janczak%yandex.com@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: kern/57794: only a small area of the touchpad works after kernel
 update
Date: Tue, 26 Dec 2023 17:18:32 +0000

 On Tue, Dec 26, 2023 at 03:35:01PM +0000, xuser wrote:
 > The following reply was made to PR kern/57794; it has been noted by GNATS.
 > 
 > From: xuser <xuser%sdf.org@localhost>
 > To: gnats-bugs%netbsd.org@localhost
 > Cc: kern-bug-people%netbsd.org@localhost, gnats-admin%netbsd.org@localhost, netbsd-bugs%netbsd.org@localhost
 > Subject: Re: kern/57794: only a small area of the touchpad works after kernel
 >  update
 > Date: Tue, 26 Dec 2023 10:43:26 -0500 (EST)
 > 
 >  Does the laptop have a pointing stick in the keyboard?
 >  Try disabling it?
 
 It doesn't. Here's someone else's photo of the same model:
 https://web.archive.org/web/20231226170048/https://libreddit.freedit.eu/img/jcw881e4e9bb1.jpg
 >  
 >  xuser%sdf.org@localhost
 >  SDF Public Access UNIX System - http://sdf.org
 >  
 >  On Mon, 25 Dec 2023, guilherme.janczak%yandex.com@localhost wrote:
 >  
 >  >> Number:         57794
 >  >> Category:       kern
 >  >> Synopsis:       only a small area of the touchpad works after kernel update
 >  >> Confidential:   no
 >  >> Severity:       non-critical
 >  >> Priority:       low
 >  >> Responsible:    kern-bug-people
 >  >> State:          open
 >  >> Class:          sw-bug
 >  >> Submitter-Id:   net
 >  >> Arrival-Date:   Mon Dec 25 20:15:00 +0000 2023
 >  >> Originator:     Guilherme Janczak
 >  >> Release:        10.0RC1
 >  >> Organization:
 >  >> Environment:
 >  > NetBSD jan-evo-nbsd 10.0_RC1 NetBSD 10.0_RC1 (GENERIC) #0: Sun Nov  5 18:30:08 UTC 2023  mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/i386/compile/GENERIC i386
 >  >> Description:
 >  > Using the 9.3 kernel, the touchpad works flawlessly.
 >  > Using the 10.0RC1 kernel, there is only a small area on the left edge of the touchpad where moving my finger around moves the Xorg cursor. Moving my finger outside of this area does nothing.
 >  >
 >  > I should point out that I'm using both kernels with the 9.3 userland. My window manager is bspwm.
 >  >
 >  > Here's some more info:
 >  > $ sysctl hw.synaptics
 >  > hw.synaptics.up_down_emulation = 3
 >  > hw.synaptics.up_down_motion_delta = 1
 >  > hw.synaptics.gesture_move = 200
 >  > hw.synaptics.gesture_length = 20
 >  > hw.synaptics.edge_left = 836
 >  > hw.synaptics.edge_right = 2008
 >  > hw.synaptics.edge_top = 2074
 >  > hw.synaptics.edge_bottom = 2050
 >  > hw.synaptics.edge_motion_delta = 32
 >  > hw.synaptics.finger_high = 35
 >  > hw.synaptics.finger_low = 20
 >  > hw.synaptics.two_fingers_emulation = 0
 >  > hw.synaptics.scale_x = 8
 >  > hw.synaptics.scale_y = 8
 >  > hw.synaptics.scale_z = 32
 >  > hw.synaptics.max_speed_x = 32
 >  > hw.synaptics.max_speed_y = 32
 >  > hw.synaptics.max_speed_z = 2
 >  > hw.synaptics.movement_threshold = 4
 >  > hw.synaptics.movement_enable = 1
 >  > hw.synaptics.button_region_movement_enable = 1
 >  > hw.synaptics.button_boundary = 2050
 >  > hw.synaptics.button2_edge = 1226
 >  > hw.synaptics.button3_edge = 1617
 >  > hw.synaptics.aux_mid_button_scroll = 1
 >  > hw.synaptics.vert_scroll_percent = 0
 >  > hw.synaptics.horizontal_scroll_percent = 0
 >  > hw.synaptics.button_region_percent = 0
 >  > hw.synaptics.debug = 0
 >  >
 >  > Here's a full dmesg with the 9.3 kernel:
 >  > Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
 >  >    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
 >  >    2018, 2019, 2020, 2021, 2022
 >  >    The NetBSD Foundation, Inc.  All rights reserved.
 >  > Copyright (c) 1982, 1986, 1989, 1991, 1993
 >  >    The Regents of the University of California.  All rights reserved.
 >  >
 >  > NetBSD 9.3 (GENERIC) #0: Thu Aug  4 15:30:37 UTC 2022
 >  > 	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/i386/compile/GENERIC
 >  > total memory = 1023 MB
 >  > avail memory = 986 MB
 >  > rnd: seeded with 256 bits
 >  > timecounter: Timecounters tick every 10.000 msec
 >  > Kernelized RAIDframe activated
 >  > running cgd selftest aes-xts-256 aes-xts-512 done
 >  > timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 >  > autoconfiguration error: BIOS32 entry point outside allowable range
 >  > Compaq  Evo N1000v                       (F.0D)
 >  > mainbus0 (root)
 >  > ACPI: RSDP 0x00000000000F9970 000014 (v00 COMPAQ)
 >  > ACPI: RSDT 0x000000003FFF0C84 00002C (v01 COMPAQ CPQ004A  09050320 CPQ  00000001)
 >  > ACPI: FACP 0x000000003FFF0C00 000084 (v02 COMPAQ CPQ004A  00000002 CPQ  00000001)
 >  > ACPI: DSDT 0x000000003FFF0CB0 005987 (v01 COMPAQ EVON800  00010000 MSFT 0100000E)
 >  > ACPI: FACS 0x000000003FFFBE80 000040
 >  > ACPI: SSDT 0x000000003FFF6637 000343 (v01 COMPAQ CPQCroDT 00001001 MSFT 0100000E)
 >  > ACPI: 2 ACPI AML tables successfully acquired and loaded
 >  > cpu0 at mainbus0
 >  > cpu0: Intel(R) Pentium(R) 4 CPU 2.20GHz, id 0xf24
 >  > cpu0: package 0, core 0, smt 0
 >  > acpi0 at mainbus0: Intel ACPICA 20190405
 >  > acpi0: X/RSDT: OemId <COMPAQ,CPQ004A ,09050320>, AslId <CPQ ,00000001>
 >  > C0B7: ACPI: Found matching pin for 0.31.INTA at func 1: 11
 >  > C0B6: ACPI: Found matching pin for 0.31.INTB at func 5: 5
 >  > C0B5: ACPI: Found matching pin for 1.0.INTA at func 0: 11
 >  > C0B6: ACPI: Found matching pin for 2.4.INTA at func 0: 5
 >  > C0B7: ACPI: Found matching pin for 2.5.INTA at func 0: 11
 >  > C0B8: ACPI: Found matching pin for 2.6.INTA at func 0: 11
 >  > C0B9: ACPI: Found matching pin for 2.8.INTA at func 0: 10
 >  > C0B9: ACPI: Found matching pin for 2.14.INTA at func 0: 10
 >  > C0B9: ACPI: Found matching pin for 2.14.INTB at func 1: 10
 >  > C0B9: ACPI: Found matching pin for 2.14.INTC at func 2: 10
 >  > acpi0: SCI interrupting at int 9
 >  > acpi0: fixed power button present
 >  > timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 >  > acpiec0 at acpi0 (C0CF, PNP0C09): io 0x62,0x66
 >  > C00A (PNP0C01) at acpi0 not configured
 >  > C13E (PNP0501) at acpi0 not configured
 >  > C143 (PNP0700) at acpi0 not configured
 >  > C15B (PNP0401) at acpi0 not configured
 >  > C160 (PNP0C04) at acpi0 not configured
 >  > attimer1 at acpi0 (C161, PNP0100): io 0x40-0x43 irq 0
 >  > pcppi1 at acpi0 (C162, PNP0800): io 0x61
 >  > midi0 at pcppi1: PC speaker
 >  > sysbeep0 at pcppi1
 >  > pckbc1 at acpi0 (C164, PNP0303) (kbd port): io 0x60,0x64 irq 1
 >  > pckbc2 at acpi0 (C165, SYN0100) (aux port): irq 12
 >  > C1B0 (PNP0C02) at acpi0 not configured
 >  > C1AD (PNP0C02) at acpi0 not configured
 >  > acpibat0 at acpi0 (C11E, PNP0C0A-1): ACPI Battery
 >  > acpiacad0 at acpi0 (C11B, ACPI0003): ACPI AC Adapter
 >  > acpibut0 at acpi0 (C17A, PNP0C0C): ACPI Power Button
 >  > acpibut1 at acpi0 (C120, PNP0C0E): ACPI Sleep Button
 >  > acpilid0 at acpi0 (C11F, PNP0C0D): ACPI Lid Switch
 >  > acpifan0 at acpi0 (C1D7, PNP0C0B-0): ACPI Fan
 >  > acpifan1 at acpi0 (C1D8, PNP0C0B-1): ACPI Fan
 >  > acpifan2 at acpi0 (C1D9, PNP0C0B-2): ACPI Fan
 >  > acpifan3 at acpi0 (C1DA, PNP0C0B-3): ACPI Fan
 >  > acpitz0 at acpi0 (TZ1)
 >  > acpitz0: active cooling level 0: 61.0C
 >  > acpitz0: active cooling level 1: 56.0C
 >  > acpitz0: active cooling level 2: 46.0C
 >  > acpitz0: active cooling level 3: 40.0C
 >  > acpitz0: levels: critical 75.0 C, passive 75.0 C
 >  > acpitz1 at acpi0 (TZ2)
 >  > acpitz1: active cooling level 0: 61.0C
 >  > acpitz1: active cooling level 1: 51.0C
 >  > acpitz1: active cooling level 2: 45.0C
 >  > acpitz1: levels: critical 87.0 C, passive 85.0 C
 >  > acpitz2 at acpi0 (TZ3)
 >  > acpitz2: levels: critical 70.0 C, passive 55.0 C, passive cooling
 >  > acpifan4 at acpi0 (C1E4, PNP0C0B-4): ACPI Fan
 >  > acpifan5 at acpi0 (C1E5, PNP0C0B-5): ACPI Fan
 >  > acpifan6 at acpi0 (C1E6, PNP0C0B-6): ACPI Fan
 >  > apm0 at acpi0: Power Management spec V1.2
 >  > ACPI: Enabled 6 GPEs in block 10 to 1F
 >  > attimer1: attached to pcppi1
 >  > pckbd0 at pckbc1 (kbd slot)
 >  > pckbc1: using irq 1 for kbd slot
 >  > wskbd0 at pckbd0: console keyboard
 >  > pms0 at pckbc1 (aux slot)
 >  > pms0: Synaptics touchpad version 5.8
 >  > pms0: Up/down buttons, Palm detect, One button click pad, Multi-finger
 >  > pckbc1: using irq 12 for aux slot
 >  > wsmouse0 at pms0 mux 0
 >  > pci0 at mainbus0 bus 0: configuration mode 1
 >  > pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 >  > pchb0 at pci0 dev 0 function 0: vendor 8086 product 1a30 (rev. 0x04)
 >  > agp0 at pchb0: aperture at 0x60000000, size 0x10000000
 >  > ppb0 at pci0 dev 1 function 0: vendor 8086 product 1a31 (rev. 0x04)
 >  > pci1 at ppb0 bus 1
 >  > pci1: i/o space, memory space enabled
 >  > genfb0 at pci1 dev 0 function 0: vendor 1002 product 4c57 (rev. 0x00)
 >  > genfb0: framebuffer at 0x48000000, size 1024x768, depth 8, stride 1024
 >  > wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
 >  > wsmux1: connecting to wsdisplay0
 >  > drm at genfb0 not configured
 >  > ppb1 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x42)
 >  > pci2 at ppb1 bus 2
 >  > pci2: i/o space, memory space enabled
 >  > vendor 14f1 product 2f00 (miscellaneous communications, revision 0x01) at pci2 dev 4 function 0 not configured
 >  > fwohci0 at pci2 dev 5 function 0: vendor 104c product 8023 (rev. 0x00)
 >  > fwohci0: interrupting at irq 11
 >  > fwohci0: OHCI version 1.10 (ROM=1)
 >  > fwohci0: No. of Isochronous channels is 4.
 >  > fwohci0: EUI64 00:08:02:71:9c:cf:85:37
 >  > fwohci0: Phy 1394a available S400, 2 ports.
 >  > fwohci0: Link S400, max_rec 2048 bytes.
 >  > ieee1394if0 at fwohci0: IEEE1394 bus
 >  > fwip0 at ieee1394if0: IP over IEEE1394
 >  > fwohci0: Initiate bus reset
 >  > fwohci0: Clear PME# now
 >  > cbb0 at pci2 dev 6 function 0: vendor 104c product ac50 (rev. 0x02)
 >  > fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller (rev. 0x42)
 >  > fxp0: interrupting at irq 10
 >  > fxp0: May need receiver lock-up workaround
 >  > fxp0: Ethernet address 00:08:02:cf:88:8f
 >  > inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
 >  > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 >  > ohci0 at pci2 dev 14 function 0: vendor 1033 product 0035 (rev. 0x41)
 >  > ohci0: interrupting at irq 10
 >  > ohci0: OHCI version 1.0, legacy support
 >  > usb0 at ohci0: USB revision 1.0
 >  > ohci1 at pci2 dev 14 function 1: vendor 1033 product 0035 (rev. 0x41)
 >  > ohci1: interrupting at irq 10
 >  > ohci1: OHCI version 1.0, legacy support
 >  > usb1 at ohci1: USB revision 1.0
 >  > ehci0 at pci2 dev 14 function 2: vendor 1033 product 00e0 (rev. 0x02)
 >  > ehci0: interrupting at irq 10
 >  > ehci0: EHCI version 0.95
 >  > ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
 >  > usb2 at ehci0: USB revision 2.0
 >  > cbb0: cacheline 0x8 lattimer 0x42
 >  > cbb0: bhlc 0x24208
 >  > cbb0: interrupting at irq 11
 >  > cardslot0 at cbb0
 >  > cardbus0 at cardslot0: bus 3
 >  > pcmcia0 at cardslot0
 >  > ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 248c (rev. 0x02)
 >  > timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 >  > ichlpcib0: 24-bit timer
 >  > tco0 at ichlpcib0: TCO (watchdog) timer configured.
 >  > tco0: Min/Max interval 2/37 seconds
 >  > ichlpcib0: SpeedStep enabled
 >  > piixide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
 >  > piixide0: bus-master DMA support present
 >  > piixide0: primary channel configured to compatibility mode
 >  > piixide0: primary channel interrupting at irq 14
 >  > atabus0 at piixide0 channel 0
 >  > piixide0: secondary channel configured to compatibility mode
 >  > piixide0: secondary channel interrupting at irq 15
 >  > atabus1 at piixide0 channel 1
 >  > auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
 >  > auich0: interrupting at irq 5
 >  > auich0: ac97: Analog Devices AD1886A codec; headphone, Analog Devices Phat Stereo
 >  > auich0: ac97: ext id 0x5<SPDIF,VRA>
 >  > isa0 at ichlpcib0
 >  > lpt0 at isa0 port 0x378-0x37b irq 7
 >  > com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 >  > fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 >  > fwohci0: BUS reset
 >  > fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
 >  > ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
 >  > ieee1394if0: bus manager 0
 >  > timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 >  > acpiacad0: AC adapter online.
 >  > auich0: measured ac97 link rate at 47298 Hz, will use 48000 Hz
 >  > audio0 at auich0: playback, capture, full duplex, independent
 >  > audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
 >  > audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
 >  > fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 >  > uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
 >  > uhub0: 3 ports with 3 removable, self powered
 >  > uhub1 at usb1: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
 >  > uhub1: 2 ports with 2 removable, self powered
 >  > uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
 >  > uhub2: 5 ports with 5 removable, self powered
 >  > IPsec: Initialized Security Association Processing.
 >  > wd0 at atabus0 drive 0
 >  > wd0: <TOSHIBA MK3018GAP>
 >  > wd0: drive supports 16-sector PIO transfers, LBA addressing
 >  > wd0: 28615 MB, 58140 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors
 >  > wd0: 32-bit data port
 >  > wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 >  > wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 >  > atapibus0 at atabus1: 2 targets
 >  > cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4244N, , GW01> cdrom removable
 >  > cd0: 32-bit data port
 >  > cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 >  > cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 >  > WARNING: 1 error while detecting hardware; check system log.
 >  > boot device: wd0
 >  > root on wd0a dumps on wd0b
 >  > root file system type: ffs
 >  > kern.module.path=/stand/i386/9.3/modules
 >  > wsdisplay0: screen 1 added (default, vt100 emulation)
 >  > wsdisplay0: screen 2 added (default, vt100 emulation)
 >  > wsdisplay0: screen 3 added (default, vt100 emulation)
 >  > wsdisplay0: screen 4 added (default, vt100 emulation)
 >  >
 >  >
 >  > Here's a full dmesg with the 10.0RC1 kernel:
 >  > Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
 >  >    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
 >  >    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
 >  >    The NetBSD Foundation, Inc.  All rights reserved.
 >  > Copyright (c) 1982, 1986, 1989, 1991, 1993
 >  >    The Regents of the University of California.  All rights reserved.
 >  >
 >  > NetBSD 10.0_RC1 (GENERIC) #0: Sun Nov  5 18:30:08 UTC 2023
 >  > 	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/i386/compile/GENERIC
 >  > total memory = 1023 MB
 >  > avail memory = 981 MB
 >  > timecounter: Timecounters tick every 10.000 msec
 >  > Kernelized RAIDframe activated
 >  > timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 >  > autoconfiguration error: BIOS32 entry point outside allowable range
 >  > mainbus0 (root)
 >  > ACPI: RSDP 0x00000000000F9970 000014 (v00 COMPAQ)
 >  > ACPI: RSDT 0x000000003FFF0C84 00002C (v01 COMPAQ CPQ004A  09050320 CPQ  00000001)
 >  > ACPI: FACP 0x000000003FFF0C00 000084 (v02 COMPAQ CPQ004A  00000002 CPQ  00000001)
 >  > ACPI: DSDT 0x000000003FFF0CB0 005987 (v01 COMPAQ EVON800  00010000 MSFT 0100000E)
 >  > ACPI: FACS 0x000000003FFFBE80 000040
 >  > ACPI: SSDT 0x000000003FFF6637 000343 (v01 COMPAQ CPQCroDT 00001001 MSFT 0100000E)
 >  > ACPI: 2 ACPI AML tables successfully acquired and loaded
 >  > cpu0 at mainbus0
 >  > cpu0: Use lfence to serialize rdtsc
 >  > cpu0: Intel(R) Pentium(R) 4 CPU 2.20GHz, id 0xf24
 >  > cpu0: node 0, package 0, core 0, smt 0
 >  > acpi0 at mainbus0: Intel ACPICA 20221020
 >  > acpi0: X/RSDT: OemId <COMPAQ,CPQ004A ,09050320>, AslId <CPQ ,00000001>
 >  > C0B7: ACPI: Found matching pin for 0.31.INTA at func 1: 11
 >  > C0B6: ACPI: Found matching pin for 0.31.INTB at func 5: 5
 >  > C0B5: ACPI: Found matching pin for 1.0.INTA at func 0: 11
 >  > C0B6: ACPI: Found matching pin for 2.4.INTA at func 0: 5
 >  > C0B7: ACPI: Found matching pin for 2.5.INTA at func 0: 11
 >  > C0B8: ACPI: Found matching pin for 2.6.INTA at func 0: 11
 >  > C0B9: ACPI: Found matching pin for 2.8.INTA at func 0: 10
 >  > C0B9: ACPI: Found matching pin for 2.14.INTA at func 0: 10
 >  > C0B9: ACPI: Found matching pin for 2.14.INTB at func 1: 10
 >  > C0B9: ACPI: Found matching pin for 2.14.INTC at func 2: 10
 >  > acpi0: SCI interrupting at int 9
 >  > acpi0: fixed power button present
 >  > timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 >  > acpiec0 at acpi0 (C0CF, PNP0C09): io 0x62,0x66
 >  > C00A (PNP0C01) at acpi0 not configured
 >  > C13E (PNP0501) at acpi0 not configured
 >  > C143 (PNP0700) at acpi0 not configured
 >  > C15B (PNP0401) at acpi0 not configured
 >  > C160 (PNP0C04) at acpi0 not configured
 >  > attimer1 at acpi0 (C161, PNP0100): io 0x40-0x43 irq 0
 >  > pcppi1 at acpi0 (C162, PNP0800): io 0x61
 >  > midi0 at pcppi1: PC speaker
 >  > sysbeep0 at pcppi1
 >  > pckbc1 at acpi0 (C164, PNP0303) (kbd port): io 0x60,0x64 irq 1
 >  > pckbc2 at acpi0 (C165, SYN0100) (aux port): irq 12
 >  > acpibat0 at acpi0 (C11E, PNP0C0A-1): ACPI Battery
 >  > acpiacad0 at acpi0 (C11B, ACPI0003): ACPI AC Adapter
 >  > acpibut0 at acpi0 (C17A, PNP0C0C): ACPI Power Button
 >  > acpibut1 at acpi0 (C120, PNP0C0E): ACPI Sleep Button
 >  > acpilid0 at acpi0 (C11F, PNP0C0D): ACPI Lid Switch
 >  > acpifan0 at acpi0 (C1D7, PNP0C0B-0): ACPI Fan
 >  > acpifan1 at acpi0 (C1D8, PNP0C0B-1): ACPI Fan
 >  > acpifan2 at acpi0 (C1D9, PNP0C0B-2): ACPI Fan
 >  > acpifan3 at acpi0 (C1DA, PNP0C0B-3): ACPI Fan
 >  > acpitz0 at acpi0 (TZ1)
 >  > acpitz0: active cooling level 0: 61.0C
 >  > acpitz0: active cooling level 1: 56.0C
 >  > acpitz0: active cooling level 2: 46.0C
 >  > acpitz0: active cooling level 3: 40.0C
 >  > acpitz0: levels: critical 75.0 C, passive 75.0 C
 >  > acpitz1 at acpi0 (TZ2)
 >  > acpitz1: active cooling level 0: 61.0C
 >  > acpitz1: active cooling level 1: 51.0C
 >  > acpitz1: active cooling level 2: 45.0C
 >  > acpitz1: levels: critical 87.0 C, passive 85.0 C
 >  > acpitz2 at acpi0 (TZ3)
 >  > acpitz2: levels: critical 70.0 C, passive 55.0 C, passive cooling
 >  > acpifan4 at acpi0 (C1E4, PNP0C0B-4): ACPI Fan
 >  > acpifan5 at acpi0 (C1E5, PNP0C0B-5): ACPI Fan
 >  > acpifan6 at acpi0 (C1E6, PNP0C0B-6): ACPI Fan
 >  > apm0 at acpi0: Power Management spec V1.2
 >  > ACPI: Enabled 6 GPEs in block 10 to 1F
 >  > attimer1: attached to pcppi1
 >  > pckbd0 at pckbc1 (kbd slot)
 >  > pckbc1: using irq 1 for kbd slot
 >  > wskbd0 at pckbd0: console keyboard
 >  > pms0 at pckbc1 (aux slot)
 >  > pms0: Synaptics touchpad version 5.8
 >  > pms0: Up/down buttons, Palm detect, One button click pad, Multi-finger, Reports max, Reports min
 >  > pms0: Probed max coordinates right: 2008, top: 2074
 >  > pms0: Probed min coordinates left: 836, bottom: 2050
 >  > pckbc1: using irq 12 for aux slot
 >  > wsmouse0 at pms0 mux 0
 >  > pci0 at mainbus0 bus 0: configuration mode 1
 >  > pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 >  > pchb0 at pci0 dev 0 function 0: Intel 82845 Host (rev. 0x04)
 >  > agp0 at pchb0: aperture at 0x60000000, size 0x10000000
 >  > ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x04)
 >  > pci1 at ppb0 bus 1
 >  > pci1: i/o space, memory space enabled
 >  > genfb0 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M7 LW (rev. 0x00)
 >  > genfb0: framebuffer at 0x48000000, size 1024x768, depth 8, stride 1024
 >  > wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
 >  > wsmux1: connecting to wsdisplay0
 >  > drm at genfb0 not configured
 >  > ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x42)
 >  > pci2 at ppb1 bus 2
 >  > pci2: i/o space, memory space enabled
 >  > Conexant Systems product 2f00 (miscellaneous communications, revision 0x01) at pci2 dev 4 function 0 not configured
 >  > fwohci0 at pci2 dev 5 function 0: Texas Instruments TSB43AA22/A IEEE 1394 Host Controller (rev. 0x00)
 >  > fwohci0: interrupting at irq 11
 >  > fwohci0: OHCI version 1.10 (ROM=1)
 >  > fwohci0: No. of Isochronous channels is 4.
 >  > fwohci0: EUI64 00:08:02:71:9c:cf:85:37
 >  > fwohci0: Phy 1394a available S400, 2 ports.
 >  > fwohci0: Link S400, max_rec 2048 bytes.
 >  > ieee1394if0 at fwohci0: IEEE1394 bus
 >  > fwip0 at ieee1394if0: IP over IEEE1394
 >  > fwohci0: Initiate bus reset
 >  > fwohci0: Clear PME# now
 >  > cbb0 at pci2 dev 6 function 0: Texas Instruments PCI1410 PCI-CardBus Bridge (rev. 0x02)
 >  > fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller (rev. 0x42)
 >  > fxp0: interrupting at irq 10
 >  > fxp0: May need receiver lock-up workaround
 >  > fxp0: Ethernet address 00:08:02:cf:88:8f
 >  > inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
 >  > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 >  > ohci0 at pci2 dev 14 function 0: NEC USB Host Controller (rev. 0x41)
 >  > ohci0: interrupting at irq 10
 >  > ohci0: OHCI version 1.0, legacy support
 >  > usb0 at ohci0: USB revision 1.0
 >  > ohci1 at pci2 dev 14 function 1: NEC USB Host Controller (rev. 0x41)
 >  > ohci1: interrupting at irq 10
 >  > ohci1: OHCI version 1.0, legacy support
 >  > usb1 at ohci1: USB revision 1.0
 >  > ehci0 at pci2 dev 14 function 2: NEC USB2 Host Controller (rev. 0x02)
 >  > ehci0: 32-bit DMA
 >  > ehci0: interrupting at irq 10
 >  > ehci0: EHCI version 0.95
 >  > ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
 >  > ehci0: Using DMA subregion for control data structures
 >  > usb2 at ehci0: USB revision 2.0
 >  > cbb0: cacheline 0x8 lattimer 0x42
 >  > cbb0: bhlc 0x24208
 >  > cbb0: interrupting at irq 11
 >  > cardslot0 at cbb0
 >  > cardbus0 at cardslot0: bus 3
 >  > pcmcia0 at cardslot0
 >  > ichlpcib0 at pci0 dev 31 function 0: Intel 82801CAM LPC Interface Bridge (rev. 0x02)
 >  > timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 >  > ichlpcib0: 24-bit timer
 >  > tco0 at ichlpcib0: TCO (watchdog) timer configured.
 >  > tco0: Min/Max interval 2/37 seconds
 >  > ichlpcib0: SpeedStep enabled
 >  > piixide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
 >  > piixide0: bus-master DMA support present
 >  > piixide0: primary channel configured to compatibility mode
 >  > piixide0: primary channel interrupting at irq 14
 >  > atabus0 at piixide0 channel 0
 >  > piixide0: secondary channel configured to compatibility mode
 >  > piixide0: secondary channel interrupting at irq 15
 >  > atabus1 at piixide0 channel 1
 >  > auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
 >  > auich0: interrupting at irq 5
 >  > auich0: ac97: Analog Devices AD1886A codec; headphone, Analog Devices Phat Stereo
 >  > auich0: ac97: ext id 0x5<SPDIF,VRA>
 >  > isa0 at ichlpcib0
 >  > lpt0 at isa0 port 0x378-0x37b irq 7
 >  > com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
 >  > fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 >  > fwohci0: BUS reset
 >  > fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
 >  > ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
 >  > ieee1394if0: bus manager 0
 >  > timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 >  > acpiacad0: AC adapter online.
 >  > auich0: measured ac97 link rate at 47247 Hz, will use 48000 Hz
 >  > audio0 at auich0: playback, capture, full duplex, independent
 >  > audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
 >  > audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
 >  > fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 >  > uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
 >  > uhub0: 3 ports with 3 removable, self powered
 >  > uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
 >  > uhub1: 2 ports with 2 removable, self powered
 >  > uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
 >  > uhub2: 5 ports with 5 removable, self powered
 >  > IPsec: Initialized Security Association Processing.
 >  > wd0 at atabus0 drive 0
 >  > wd0: <TOSHIBA MK3018GAP>
 >  > wd0: drive supports 16-sector PIO transfers, LBA addressing
 >  > wd0: 28615 MB, 58140 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors
 >  > wd0: 32-bit data port
 >  > wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 >  > wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 >  > atapibus0 at atabus1: 2 targets
 >  > cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4244N, , GW01> cdrom removable
 >  > cd0: 32-bit data port
 >  > cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 >  > cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 >  > swwdog0: software watchdog initialized
 >  > WARNING: 1 error while detecting hardware; check system log.
 >  > boot device: wd0
 >  > root on wd0a dumps on wd0b
 >  > root file system type: ffs
 >  > kern.module.path=/stand/i386/10.0/modules
 >  > wsdisplay0: screen 1 added (default, vt100 emulation)
 >  > wsdisplay0: screen 2 added (default, vt100 emulation)
 >  > wsdisplay0: screen 3 added (default, vt100 emulation)
 >  > wsdisplay0: screen 4 added (default, vt100 emulation)
 >  >
 >  >> How-To-Repeat:
 >  >
 >  >> Fix:
 >  >
 >  >
 >
Prev by Date: Re: kern/57793 (can't load the radeondrm kernel module)
Next by Date: re: kern/57797: radeon(4) GPU listed as supported, but doesn't work
Previous by Thread: Re: kern/57794: only a small area of the touchpad works after kernel update
Next by Thread: Re: kern/57794: only a small area of the touchpad works after kernel update
Indexes:
Home | Main Index | Thread Index | Old Index