Re: kern/56568: ipmi.c 1.7 causes large boot delays

["Edgar Fuß via gnats" <gnats-admin%NetBSD.org@localhost>]

The following reply was made to PR kern/56568; it has been noted by GNATS.

From: Edgar =?iso-8859-1?B?RnXf?= <ef%math.uni-bonn.de@localhost>
To: Manuel Bouyer <bouyer%antioche.eu.org@localhost>
Cc: Taylor R Campbell <campbell+netbsd-tech-kern%mumble.net@localhost>,
	Michael van Elst <mlelstv%NetBSD.org@localhost>,
	Hauke Fath <hf%spg.tu-darmstadt.de@localhost>, gnats-bugs%NetBSD.org@localhost,
	netbsd-bugs%NetBSD.org@localhost
Subject: Re: kern/56568: ipmi.c 1.7 causes large boot delays
Date: Tue, 3 Dec 2024 12:46:04 +0100

 > Looks fine on a supermicro board:
 On my Dell 6515, with a patched 10.0, I get
 
 [     5.143346] wsmouse0 at ums0 mux 0
 [     5.273346] WARNING: findroot: double match for boot device (bootinfo/bootwedge:sd0 bootinfo/bootwedge:
 sd1)
 [     5.273346] raid0: RAID Level 1
 [     5.273346] raid0: Components: /dev/dk1 /dev/dk3
 [     5.273346] raid0: Total Sectors: 930869120 (454525 MB)
 [     5.283346] WARNING: 5 errors while detecting hardware; check system log.
 [     5.283346] boot device: raid0
 [     5.283346] root on raid0a dumps on raid0b
 [     5.293346] root file system type: ffs
 [     5.293346] kern.module.path=/stand/amd64/10.0/modules
 [    14.753360] arp_llinfo_output: source can't be determined: dst=131.220.132.161
 [    15.753362] arp_llinfo_output: source can't be determined: dst=131.220.132.161
 [    16.073362] wsdisplay0: screen 1 added (default, vt100 emulation)
 [    16.073362] wsdisplay0: screen 2 added (default, vt100 emulation)
 [    16.073362] wsdisplay0: screen 3 added (default, vt100 emulation)
 [    16.073362] wsdisplay0: screen 4 added (default, vt100 emulation)
 [    16.753363] arp_llinfo_output: source can't be determined: dst=131.220.132.161
 [    17.753365] arp_llinfo_output: source can't be determined: dst=131.220.132.161
 [    21.793371] arp_llinfo_output: source can't be determined: dst=131.220.132.161
 [    22.793373] arp_llinfo_output: source can't be determined: dst=131.220.132.161
 [    23.793374] arp_llinfo_output: source can't be determined: dst=131.220.132.161
 [    24.793412] arp_llinfo_output: source can't be determined: dst=131.220.132.161
 [    27.793567] arp_llinfo_output: source can't be determined: dst=131.220.132.161
 [    36.794034] arp_llinfo_output: source can't be determined: dst=131.220.132.161
 [    41.424274] ipmi0: autoconfiguration error: get_sdr_partial: recvcmd fails
 [    41.424274] ipmi0: autoconfiguration error: get chunk : 21,16 fails
 [    41.424274] ipmi0: version 32.0 interface KCS iobase 0xca8/0x8 spacing 4
 [    41.424274] ipmi0: ID 32.1 IPMI 2.0 Available +SDRs
 [    41.424274] ipmi0: Additional Chassis Bridge IPMBRcv FRU SEL SDR Sensor
 [    41.424274] ipmi0: Manufacturer 002a2 Product 01a2
 [    41.424274] ipmi0: Firmware 7.0