NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: install/58932: NetBSD-10.99.12-i386-install.img ACPI problems Compal DL-75 laptop
The following reply was made to PR install/58932; it has been noted by GNATS.
From: Ramiro Aceves <ea1abz%gmail.com@localhost>
To: Taylor R Campbell <riastradh%NetBSD.org@localhost>
Cc: gnats-bugs%netbsd.org@localhost, install-manager%netbsd.org@localhost,
gnats-admin%netbsd.org@localhost, netbsd-bugs%netbsd.org@localhost
Subject: Re: install/58932: NetBSD-10.99.12-i386-install.img ACPI problems
Compal DL-75 laptop
Date: Thu, 26 Dec 2024 08:25:02 +0100
El 26/12/24 a las 5:16, Taylor R Campbell escribió:
>> Date: Wed, 25 Dec 2024 21:51:06 +0100
>> From: Ramiro Aceves <ea1abz%gmail.com@localhost>
>>
>> Thanks Taylor for the tips! Sorry, I do not see any atached patch file.
>
> Oops -- attached now, sorry!
Thanks so much Taylor for help,
I compiled the kernel with the patched file using ./build.sh command
like you explained (changing to i386). This way compilation succeded
fine, it build toolchain first after a long time in this weird, slow but
beloved i386 machine. It seems that the "manual way" method of building
the kernel as The Guide describe does not work in this case. I required
toolchain to be built even when there is no change in architecture.
I booted with the new kernel and it enters again in ddb, rebooted from
that and dmesg was saved. I attach dmesg below:
Regards.
Ramiro
[ 1207.460164] rebooting...
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003,
[ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
2012, 2013,
[ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021,
2022, 2023,
[ 1.000000] 2024
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All
rights reserved.
[ 1.000000] NetBSD 10.99.12 (GENERIC) #1: Thu Dec 26 08:05:47 CET 2024
[ 1.000000]
ramiro@netbsd-compal.remigio:/usr/obj/sys/arch/i386/compile/GENERIC
[ 1.000000] total memory = 2039 MB
[ 1.000000] avail memory = 1977 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[ 1.000004] mainbus0 (root)
[ 1.000004] ACPI: RSDP 0x00000000000E5010 000014 (v00 INSYDE)
[ 1.000004] ACPI: RSDT 0x000000007F7FB2BB 000034 (v01 INSYDE
RSDT_000 00000100 ABCD 00010200)
[ 1.000004] ACPI: FACP 0x000000007F7FFB00 000074 (v01 INSYDE
FACP_000 00000100 0000 00010200)
[ 1.000004] ACPI: DSDT 0x000000007F7FB920 0041DE (v01 COMPAL DL7x
00000001 INTL 02002036)
[ 1.000004] ACPI: FACS 0x000000007F7FFFC0 000040
[ 1.000004] ACPI: APIC 0x000000007F7FFB90 000068 (v01 STUPID
MAPIC_00 30307830 ABCD 00010200)
[ 1.000004] ACPI: SSDT 0x000000007F7FB4C7 000277 (v01 PmRef Cpu0Ist
00003000 INTL 20030522)
[ 1.000004] ACPI: SSDT 0x000000007F7FB2EF 0001D8 (v01 PmRef Cpu0Cst
00003001 INTL 20030522)
[ 1.000004] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 1.000004] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20,
24 pins
[ 1.000004] cpu0 at mainbus0 apid 0
[ 1.000004] cpu0: Use lfence to serialize rdtsc
[ 1.000004] cpu0: Intel(R) Pentium(R) M processor 1.86GHz, id 0x6d8
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] acpi0 at mainbus0: Intel ACPICA 20240827
[ 1.000004] acpi0: X/RSDT: OemId <INSYDE,RSDT_000,00000100>, AslId
<ABCD,00010200>
[ 1.000004] acpi0: SCI interrupting at int 9
[ 1.000004] acpi0: fixed power button present
[ 1.000004] acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
[ 1.000004] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
[ 1.000004] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[ 1.000004] acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[ 1.000004] acpivga0 at acpi0 (GFX0): ACPI Display Adapter
[ 1.000004] acpiout0 at acpivga0 (LCD, 0x0400): ACPI Display Output
Device
[ 1.000004] acpiout1 at acpivga0 (CRT1, 0x0100): ACPI Display Output
Device
[ 1.000004] acpiout2 at acpivga0 (DTV1, 0x0200): ACPI Display Output
Device
[ 1.000004] acpivga0: connected output devices:
[ 1.000004] acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0,
bios detect
[ 1.000004] acpivga0: 0x0400 (acpiout0): Unknown Output Device,
head 0, bios detect
[ 1.000004] acpivga0: 0x0200 (acpiout2): TV, head 0, bios detect
[ 1.000004] FWHD (INT0800) at acpi0 not configured
[ 1.000004] MATH (PNP0C04) at acpi0 not configured
[ 1.000004] attimer1 at acpi0 (TIMR, PNP0100): io
0x40-0x43,0x50-0x53 irq 0
[ 1.000004] acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
[ 1.000004] acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
[ 1.000004] pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64
irq 1
[ 1.000004] pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
[ 1.000004] apm0 at acpi0: Power Management spec V1.2
[ 1.000004] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 1.000004] pckbd0 at pckbc1 (kbd slot)
[ 1.000004] pckbport_cmd: send error
[ 1.000004] pckbc1: using irq 1 for kbd slot
[ 1.000004] wskbd0 at pckbd0: console keyboard
[ 1.000004] autoconfiguration error: pckbc: aux echo error 1
[ 1.000004] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.000004] pci0: i/o space, memory space enabled, rd/line, rd/mult,
wr/inv ok
[ 1.000004] pchb0 at pci0 dev 0 function 0: Intel
82915PM/GM/GMS,82910GML Host Bridge (rev. 0x04)
[ 1.000004] agp0 at pchb0: i915-family chipset
[ 1.000004] agp0: detected 7932k stolen memory
[ 1.000004] agp0: aperture at 0xa0000000, size 0x10000000
[ 1.000004] i915drmkms0 at pci0 dev 2 function 0: Intel
82915GM/GMS,82910GML Integrated Graphics Device (rev. 0x04)
[ 1.000004] Intel 82915GM/GMS IGD Companion (miscellaneous display,
revision 0x04) at pci0 dev 2 function 1 not configured
[ 1.000004] uhci0 at pci0 dev 29 function 0: Intel 82801FB/FR USB
UHCI Controller (rev. 0x04)
[ 1.000004] uhci0: interrupting at ioapic0 pin 23
[ 1.000004] usb0 at uhci0: USB revision 1.0
[ 1.000004] uhci1 at pci0 dev 29 function 1: Intel 82801FB/FR USB
UHCI Controller (rev. 0x04)
[ 1.000004] uhci1: interrupting at ioapic0 pin 19
[ 1.000004] usb1 at uhci1: USB revision 1.0
[ 1.000004] uhci2 at pci0 dev 29 function 2: Intel 82801FB/FR USB
UHCI Controller (rev. 0x04)
[ 1.000004] uhci2: interrupting at ioapic0 pin 18
[ 1.000004] usb2 at uhci2: USB revision 1.0
[ 1.000004] uhci3 at pci0 dev 29 function 3: Intel 82801FB/FR USB
UHCI Controller (rev. 0x04)
[ 1.000004] uhci3: interrupting at ioapic0 pin 16
[ 1.000004] usb3 at uhci3: USB revision 1.0
[ 1.000004] ehci0 at pci0 dev 29 function 7: Intel 82801FB/FR USB
EHCI Controller (rev. 0x04)
[ 1.000004] ehci0: 64-bit DMA - limited
[ 1.000004] ehci0: interrupting at ioapic0 pin 23
[ 1.000004] ehci0: EHCI version 0.0
[ 1.000004] ehci0: wrong number of companions (0 != 4)
[ 1.000004] ehci0: Using DMA subregion for control data structures
[ 1.000004] ehci0: autoconfiguration error: reset timeout
[ 1.000004] ehci0: autoconfiguration error: init failed, error=5
[ 1.000004] ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI
Bridge (rev. 0xd4)
[ 1.000004] pci1 at ppb0 bus 1
[ 1.000004] pci1: i/o space, memory space enabled
[ 1.000004] fwohci0 at pci1 dev 0 function 0: VIA Technologies
VT6306 IEEE 1394 Host Controller (rev. 0x80)
[ 1.000004] fwohci0: interrupting at ioapic0 pin 20
[ 1.000004] fwohci0: OHCI version 1.0 (ROM=1)
[ 1.000004] fwohci0: No. of Isochronous channels is 4.
[ 1.000004] fwohci0: EUI64 00:02:3f:59:88:40:01:0f
[ 1.000004] fwohci0: Phy 1394a available S400, 2 ports.
[ 1.000004] fwohci0: Link S400, max_rec 512 bytes.
[ 1.000004] fwohci0: max_rec 512 -> 2048
[ 1.000004] ieee1394if0 at fwohci0: IEEE1394 bus
[ 1.000004] fwip0 at ieee1394if0: IP over IEEE1394
[ 1.000004] fwohci0: Initiate bus reset
[ 1.000004] re0 at pci1 dev 1 function 0: RealTek 8169/8110 Gigabit
Ethernet (rev. 0x10)
[ 1.000004] re0: interrupting at ioapic0 pin 21
[ 1.000004] re0: RTL8169/8110SB (0x1000)
[ 1.000004] re0: Ethernet address 00:0f:b0:93:6f:e1
[ 1.000004] re0: using 256 tx descriptors
[ 1.000004] rgephy0 at re0 phy 7: RTL8211B 1000BASE-T media interface
[ 1.000004] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT, 1000baseT-FDX, auto
[ 1.000004] iwi0 at pci1 dev 2 function 0: Intel PRO/Wireless LAN
2200BG Mini-PCI Adapter (rev. 0x05)
[ 1.000004] iwi0: interrupting at ioapic0 pin 22
[ 1.000004] iwi0: 802.11 address 00:13:ce:6b:7d:01
[ 1.000004] cbb0 at pci1 dev 4 function 0: ENE Technology CB710
CardBus Controller (rev. 0x00)
[ 1.000004] ENE Technology product 0530 (flash memory) at pci1 dev 4
function 1 not configured
[ 1.000004] sdhc0 at pci1 dev 4 function 2: ENE Technology
CB712/714/810 PCI SD Card Reader Controller (rev. 0x00)
[ 1.000004] sdhc0: interrupting at ioapic0 pin 17
[ 1.000004] sdhc0: SDHC 1.0, rev 0, caps <01e021a1/00000000>, SDMA,
33000 kHz, HS 3.3V, 512 byte blocks
[ 1.000004] sdmmc0 at sdhc0 slot 0
[ 1.000004] cbb0: cacheline 0x8 lattimer 0x40
[ 1.000004] cbb0: bhlc 0x824008
[ 1.000004] cbb0: autoconfiguration error: secondary bus number
uninitialized; try PCI_BUS_FIXUP
[ 1.000004] cbb0: interrupting at ioapic0 pin 16
[ 1.000004] cardslot0 at cbb0
[ 1.000004] pcmcia0 at cardslot0
[ 1.000004] auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97
Audio
[ 1.000004] auich0: interrupting at ioapic0 pin 17
[ 1.000004] auich0: ac97: Avance Logic unknown (0x414c4752) codec;
headphone, 20 bit DAC, 18 bit ADC, no 3D stereo
[ 1.000004] auich0: ac97: ext id 0xa07<AC97_23,AMAP,SPDIF,DRA,VRA>
[ 1.000004] Intel 82801FB/FR AC'97 Modem Controller (modem
communications, revision 0x04) at pci0 dev 30 function 3 not configured
[ 1.000004] ichlpcib0 at pci0 dev 31 function 0: Intel 82801FBM
ICH6M LPC Interface Bridge (rev. 0x04)
[ 1.000004] timecounter: Timecounter "ichlpcib0" frequency 3579545
Hz quality 1000
[ 1.055298] ichlpcib0: 24-bit timer
[ 1.055298] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[ 1.055298] tco0: Min/Max interval 1/367 seconds
[ 1.055298] piixide0 at pci0 dev 31 function 1: Intel 82801FB IDE
Controller (ICH6) (rev. 0x04)
[ 1.055298] piixide0: bus-master DMA support present
[ 1.055298] piixide0: primary channel configured to compatibility mode
[ 1.055298] piixide0: primary channel interrupting at ioapic0 pin 14
[ 1.055298] atabus0 at piixide0 channel 0
[ 1.055298] piixide0: secondary channel configured to compatibility mode
[ 1.055298] piixide0: secondary channel interrupting at ioapic0 pin 15
[ 1.055298] atabus1 at piixide0 channel 1
[ 1.055298] ichsmb0 at pci0 dev 31 function 3: Intel 82801FB/FR
SMBus Controller (rev. 0x04)
[ 1.055298] ichsmb0: interrupting at ioapic0 pin 19
[ 1.055298] iic0 at ichsmb0: I2C bus
[ 1.055298] isa0 at ichlpcib0
[ 1.055298] pcppi0 at isa0 port 0x61
[ 1.055298] midi0 at pcppi0: PC speaker
[ 1.055298] sysbeep0 at pcppi0
[ 1.055298] attimer1: attached to pcppi0
[ 1.055298] acpicpu0 at cpu0: ACPI CPU
[ 1.055298] acpicpu0: C1: HLT, lat 0 us, pow 0 mW
[ 1.055298] acpicpu0: C2: I/O, lat 1 us, pow 0 mW
[ 1.055298] acpicpu0: C3: I/O, lat 85 us, pow 0 mW
[ 1.055298] acpicpu0: P0: I/O, lat 110 us, pow 27000 mW, 1867 MHz
[ 1.055298] acpicpu0: P1: I/O, lat 110 us, pow 23000 mW, 1600 MHz
[ 1.055298] acpicpu0: P2: I/O, lat 110 us, pow 20000 mW, 1333 MHz
[ 1.055298] acpicpu0: P3: I/O, lat 110 us, pow 17000 mW, 1067 MHz
[ 1.055298] acpicpu0: P4: I/O, lat 110 us, pow 13000 mW, 800 MHz
[ 1.055298] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.055298] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.055298] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.055298] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.055298] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.055298] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.055298] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.055298] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.055298] fwohci0: BUS reset
[ 1.055298] fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
[ 1.055298] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
[ 1.055298] ieee1394if0: bus manager 0
[ 1.055298] WARNING: system needs entropy for security; see entropy(7)
[ 1.055298] timecounter: Timecounter "clockinterrupt" frequency 100
Hz quality 0
[ 1.268746] panic: cpu0: time has not advanced in 1501 heartbeats
[ 1.268746] cpu0: Begin traceback...
[ 1.268746]
vpanic(c14353ec,db6b0f04,db6b0f4c,c0d71922,c14353ec,c1651764,5dd,dc8e6e68,0,c43fe4c0)
at netbsd:vpanic+0x176
[ 1.268746]
panic(c14353ec,c1651764,5dd,dc8e6e68,0,c43fe4c0,0,5dc,5dc,f) at
netbsd:panic+0x18
[ 1.268746]
heartbeat(dc8e6e68,0,5dd,0,12d,dc8e6ef8,dc8e6ebc,c0102fd4,dc8e6e68,dc8e6e68)
at netbsd:heartbeat+0x292
[ 1.268746] hardclock(dc8e6e68,dc8e6e68,0,0,0,0,0,0,0,0) at
netbsd:hardclock+0x79
[ 1.268746] --- switch to interrupt stack ---
[ 1.268746] Xresume_lapic_ltimer() at netbsd:Xresume_lapic_ltimer+0x24
[ 1.268746] --- interrupt ---
[ 1.268746]
bus_space_read_4(c43e65c4,c43fe4c0,0,4af,c43e65c4,dd313180,c1689420,0,dc8e6f60,dc8e6f60)
at netbsd:bus_space_read_4+0x15
[ 1.268746] binuptime(dc8e6ef8,1,0,4c981c14,44c97f02,0,0,0,0,0) at
netbsd:binuptime+0x7d
[ 1.268746]
microtime(dc8e6f60,dc0c4200,4,1,dc8f1000,c43ee108,10,bb80,c0dc88fa,0) at
netbsd:microtime+0x1a
[ 1.268746]
auich_finish_attach(c43e8400,10,c01020f3,c43fe4c0,c43fe4c0,c43fe4c0,c0db660b,0,c0102011,c43fe4c0)
at netbsd:auich_finish_attach+0x1fc
[ 1.268746]
config_interrupts_thread(c43fe4c0,1965000,1971000,0,c01005a8,0,0,0,0,0)
at netbsd:config_interrupts_thread+0x7f
[ 1.268746] cpu0: End traceback...
[ 1.268746] fatal breakpoint trap in supervisor mode
[ 1.268746] trap type 1 code 0 eip 0xc0128094 cs 0x8 eflags 0x202
cr2 0 ilevel 0x7 esp 0xdb6b0ee8
[ 1.268746] curlwp 0xc43fe4c0 pid 0 lid 103 lowest kstack 0xdc8e42c0
fatal page fault in supervisor mode
[ 2.173675] trap type 6 code 0x2 eip 0xc010b2b9 cs 0x8 eflags
0x10006 cr2 0x88c600d5 ilevel 0x6 esp 0xc0af0010
[ 2.173839] curlwp 0xc43fe4c0 pid 0 lid 103 lowest kstack 0xdc8e42c0
rebooting...
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003,
[ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
2012, 2013,
[ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021,
2022, 2023,
[ 1.000000] 2024
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
Home |
Main Index |
Thread Index |
Old Index