Hi all again,

I have received some responses regarding the "local" flag in /etc/ttys - I neglected to mention
that it was in place at per the man page for ttys. I've tried various combinations of flags as
well, all to no avail.

Is there anything peculiar about internal modems I should be aware off? Any weird hardware
issues (conflicts etc) that I should be looking for? 

I'm stuck and don't know how to proceed from this point...

Regards,

jmh

:-} Hi all,
:-} 
:-} I've been trying to get an internal 14.4Kbaud modem working for some
:-} time. I've checked the FAQ's, and haven't found the problems I've
:-} been having (with the modem that is ...)
:-} 
:-} I'm running NetBSD 1.0 , i386 arch (33MHz 386, ISA, ZoomFax Internal modem)
:-} 
:-} Here is the bootup stuff which shows that the os recognizes the hardware:
:-} 
:-} Mar 19 22:06:09 carc1 /netbsd: com0 at isa0 port 0x3f8-0x3ff irq 4: ns82450 or ns16450, no fifo
:-} Mar 19 22:06:09 carc1 /netbsd: com1 at isa0 port 0x2f8-0x2ff irq 3: ns82450 or ns16450, no fifo
:-} Mar 19 22:06:09 carc1 /netbsd: com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
:-} 
:-} Here's my /etc/remote file ...
:-} 
:-} # UNIX system definitions
:-} unix1200|1200 Baud dial-out to another UNIX system:\
:-} 	:el=^U^C^R^O^D^S^Q:ie=%$:oe=^D:tc=dial1200:
:-} unix300|300 Baud dial-out to another UNIX system:\
:-} 	:el=^U^C^R^O^D^S^Q:ie=%$:oe=^D:tc=dial300:
:-} unix38400|38400 Baud dial-out to another UNIX system:\
:-} 	:el=^U^C^R^O^D^S^Q:ie=%$:oe=^D:tc=dial38400:
:-} norcen|dialout to work:\
:-} 	:el=^U^C^R^O^D^S^Q:ie=%$:oe=^D:pa=none:pn=2318498:tc=dial38400:
:-} 
:-} # General dialer definitions used below
:-} #
:-} dial2400|2400 Baud Hayes attributes:\
:-}         :dv=/dev/tty00:br#2400:cu=/dev/tty00:at=hayes:du:
:-} dial1200|1200 Baud Hayes attributes:\
:-}         :dv=/dev/tty00:br#1200:cu=/dev/tty00:at=hayes:du:
:-} dial38400|9600 Baud Hayes attributes:\
:-}         :dv=/dev/tty02:cu=/dev/tty02:br#38400:at=hayes:du:
:-} 
:-} # Hardwired line
:-} #com0:dv=/dev/tty00:br#9600:
:-} #com1:dv=/dev/tty01:br#2400:
:-} com2:dv=/dev/tty02:br#19200:pa=none:
:-} 
:-} Here's the perms on the device ...
:-} 
:-} crw-------  1 uucp  wheel    8,   2 Mar 19 22:04 /dev/tty02
:-} 
:-} Running tip I get "Cannot synchronize with hayes"
:-} 
:-} Running cu, I get a timeout
:-} 
:-} Running kermit, I get nothing.
:-} 
:-} Is there something special about internal modems that I'm ignorant about?
:-} 
:-} I've changed the port settings using stty -f /dev/tty02 (i.e.: clocal, -parity,  (and a host of others to long to mention...), all to no avail...
:-} - starting to believe I've got a broken piece of hardware.
:-} 
:-} Anyone who can help, please do...
:-} 
:-} Regards,
:-} 
:-} John Hoogerdijk@ihatemodems
:-}