Hello Rick,

Many thanks for the help - it was the disk, as you suggested. 

Cheers,

Rex
------------------------------------------------------------
Rex McMaster                       rmcm@ariel.unimelb.edu.au     
 
Rick Byers writes:
 > Rex,
 > We developed non-media hardware failures at one point.  If my memory
 > serves me correct, I replaced the drive (and not the controller), and the
 > problem was solved.  This would indicate it is likely to be a drive
 > problem, but I can't be totally sure...
 > 
 > Hope this helps
 > 	Rick
 > 
 > On Tue, 24 Dec 1996 rmcm@paradiso.apana.org.au wrote:
 > 
 > > Do the following error messages indicate a controller or a disk
 > > problem? The machine hangs shortly after these messages appear.
 > > 
 > > 
 > ..CUT..
 > 
 > =========================================================================
 > Rick Byers                                      Internet Access Worldwide
 > rickb@iaw.on.ca                                System Admin, Tech Support
 > Welland, Ontario, Canada                                    (905)714-1400
 > http://www.iaw.on.ca/rickb/                         http://www.iaw.on.ca/
 > 
-- 
                                 rmcm@paradiso.apana.org.au