Hi,

I've installed NetBSD 1.4 on an 8600, and then put that drive into an Apple
Network Server 500 (which is a 604 based Mac, similar to a 9500).

Seems like the kernel/drivers see the SCSI controllers (this machine has two
53c825 as well as the default 53c825), but can't see the drive.

Any idea why? Could it becuase the ANS's have two SCSI buses?

A.

--------

OpenFirmware1.1.22
To continue booting from the default boot device type:
BOOT<return>
 ok
0 > boot disk0:0
disk0:0  -
>> NetBSD/macppc OpenFirmware Boot, Revision 1.1
>> (tsubai@mint.iri.co.jp, Tue Jul 20 01:13:42 JST 1999)
Booting /bandit/53c825@11/sd@0,0/netbsd
1874636@0x100000+179564@0x2c9acc
 start=0x100000
Copyright (c) 1996, 1997, 1998, 1999
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4.1 (GENERIC) #1: Wed Aug 11 18:08:32 JST 1999
    tsubai@mint.iri.co.jp:/usr/src/sys/arch/macppc/compile/GENERIC
CPU: 604 (Revision 303)
real mem  = 67108864
avail mem = 58273792
using 819 buffers containing 3354624 bytes of memory
mainbus0 (root)
cpu0 at mainbus0
pci0 at mainbus0 bus 0
pci0: i/o enabled, memory enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer PCI Controller (rev. 0x03)
ofb0 at pci0 dev 15 function 0: Cirrus Logic CL-GD5430
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0
obio0 at pci0 dev 16 function 0: addr 0xf3000000
esp0 at obio0 offset 0x10000 irq 12: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
mc0 at obio0 offset 0x11000: irq 14,2,3: address 00:a0:40:22:91:51
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
adb0 at obio0 offset 0x16000 irq 18: 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard
wskbd0 at akbd0
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse0 at ams0
nvram0 at obio0 offset 0x1d000
lcd at obio0 offset 0x1c000 not configured
Symbios Logic 53c825 (SCSI mass storage, revision 0x11) at pci0 dev 17
function 0 not configured
Symbios Logic 53c825 (SCSI mass storage, revision 0x11) at pci0 dev 18
function 0 not configured
pci1 at mainbus0 bus 1
pci1: i/o enabled, memory enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer PCI Controller (rev. 0x03)
wscons: wskbd0 glued to wsdisplay0
boot device: <unknown>
root device:


0 > devalias
vci0                /chaos@F0000000
pci1                /bandit@F2000000
pci2                /bandit@F4000000
fd                  /bandit/gc/swim3
kbd                 /bandit/gc/via-cuda/adb/keyboard
ttya                /bandit/gc/escc/ch-a
ttyb                /bandit/gc/escc/ch-b
enet                /bandit/gc/mace
scsi                /bandit/gc/53c94
scsi-int            /bandit/53c825@11
lcd                 /bandit/gc/lcd
screen              /bandit/54m30@F
scsi-int2           /bandit/53c825@12
disk0               /bandit/53c825@11/sd@0,0
disk1               /bandit/53c825@11/sd@1,0
disk2               /bandit/53c825@11/sd@2,0
disk3               /bandit/53c825@11/sd@3,0
disk4               /bandit/53c825@12/sd@4,0
disk5               /bandit/53c825@12/sd@5,0
disk6               /bandit/53c825@12/sd@6,0
 ok

--
dn: uid=aris,ou=People,dc=PADL,dc=COM
o: PADL Software Pty Ltd
mail: aris@PADL.COM
labeledURI: http://www.padl.com/