Okay, Dave asked for these results. And my modem is
a USRobotics 56K Faxmodem model 5686. The order part
number is USR5685D. There are DIP switches on the back.
Here are my settings:

Data Terminal Ready normal    (versus Data Terminal Ready override)
Verbal result codes           (versus Numeric result codes)
Display result codes          (versus Suppress result codes)
Echo offline commands         (versus No echo, offline commands)
Auto answer off               (versus Auto answer on first ring, or 
                               higher if specified in NVRAM)
Load factory defaults         (versus Load NVRAM defaults)
Smart mode                    (versus Dumb mode)

I made those settings as/per recommendations on the box. I presume
that they are for Windows? 

Here goes with what Dave asked for...

gus#
gus# cu -l /dev/tty00
Connected.
ATI4
U.S. Robotics 56K FAX EXT Settings...

   B0  E1  F1  M1  Q0  V1  X4  Y0
   BAUD=9600  PARITY=N  WORDLEN=8
   DIAL=TONE    ON HOOK   CID=0

   &A3  &B1  &C1  &D2  &G0  &H1  &I0  &K1
   &M4  &N0  &P0  &R2  &S0  &T5  &U0  &Y1

   S00=000  S01=000  S02=043  S03=013  S04=010  S05=008  S06=004
   S07=060  S08=002  S09=006  S10=014  S11=070  S12=050  S13=000
   S15=000  S16=000  S18=000  S19=000  S21=010  S22=017  S23=019
   S25=005  S27=000  S28=008  S29=020  S30=000  S31=128  S32=002
   S33=000  S34=000  S35=000  S36=014  S38=000  S39=000  S40=001
   S41=000  S42=000

   LAST DIALED #:

OK
~[gus].

Disconnected.
gus#


...Note that there were some ^M chars in this file which do not
show above.

Thanks, Gan

--

Mysterious Starling -- Rarest Extinct Bird
     _         
   <(+)__        Gan Uesli Starling 
     ((__/)=-    Kalamazoo, MI, USA
      `||`      
       ++        http://starling.ws 

Newbie-2-Newbie NetBSD Unix How-To Pages at... 
http://om-ah-hum.com/share/gus_netbsd_index.html