Subject: Re: dvd and sound card
To: None <cube@cubidou.net>
From: Thierry Lacoste <th.lacoste@wanadoo.fr>
List: netbsd-help
Date: 11/21/2004 21:05:09
> > I have no information on the chip except the output of dmesg.
>
> That's precisely what I'd like to see.
Here's the output of dmesg (Lines begining with a space belong
to the previous line).
BTW I have (not so many) devices not configured, I'd be glad if
someone could tell me how to fix that.
Also, I have the following line
pciide0: bus-master DMA support present, but unused (no driver support)
does it entail an additional burden on the CPU?
Regards,
Thierry.
NetBSD 2.0_RC4 (MY_KERNEL) #1: Sun Nov 14 21:52:48 CET 2004
root@sirius:/usr/obj/sys/arch/i386/compile/MY_KERNEL
total memory = 511 MB
avail memory = 494 MB
BIOS32 rev. 0 found at 0xfd520
PCI BIOS rev. 2.1 found at 0xfd778
pcibios: config mechanism [1][x], special cycles [x][x], last bus 4
PCI IRQ Routing Table rev. 1.0 found at 0xfde90, size 192 bytes (10 entries)
PCI Interrupt Router at 000:20:3 (ATI Technologies product 0x434c compatible)
pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x1002 product 0x434c
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:19:0 0x1002 0x4347 A 0x04 11 1 already assigned
000:19:1 0x1002 0x4348 A 0x04 11 1 already assigned
000:19:2 0x1002 0x4345 A 0x04 11 1 already assigned
000:20:1 0x1002 0x4349 A 0x01 11 1 fixed up
000:20:5 0x1002 0x4341 B 0x02 11 1 already assigned
000:20:6 0x1002 0x434d B 0x02 11 1 already assigned
001:05:0 0x1002 0x5c61 A 0x04 11 1 already assigned
002:03:0 0x104c 0x8023 A 0x01 11 1 already assigned
002:04:0 0x104c 0xac55 A 0x01 11 1 fixed up
002:04:1 0x104c 0xac55 A 0x01 11 1 fixed up
002:10:0 0x10ec 0x8139 A 0x01 11 1 already assigned
------------------------------------------
PCI fixup examining 1002:5833
PCI fixup examining 1002:5838
PCI fixup examining 1002:5c61
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 1002:4347
PCI fixup examining 1002:4348
PCI fixup examining 1002:4345
PCI fixup examining 1002:4353
PCI fixup examining 1002:4349
PCI fixup examining 1002:434c
PCI fixup examining 1002:4342
PCI fixup examining 104c:8023
PCI fixup examining 104c:ac55
PCI bridge 2: primary 2, secondary 3, subordinate 3
PCI fixup examining 104c:ac55
PCI bridge 3: primary 2, secondary 4, subordinate 4
PCI fixup examining 10ec:8139
PCI bridge 1: primary 0, secondary 2, subordinate 4
PCI fixup examining 1002:4341
PCI fixup examining 1002:434d
PCI bus #4 is the last bus
[System BIOS Setting]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x1002 0x5833
10h mem 0xdc000000 0x04000000
14h mem 0xd8000000 0x00001000
[OK]
000:01:0 0x1002 0x5838
[OK]
000:19:0 0x1002 0x4347
10h mem 0xd8001000 0x00001000
[OK]
000:19:1 0x1002 0x4348
10h mem 0xd8002000 0x00001000
[OK]
000:19:2 0x1002 0x4345
10h mem 0xd8003000 0x00001000
[OK]
000:20:0 0x1002 0x4353
10h port 0x00008060 0x00000010
14h mem 0xd8004000 0x00000400
[OK]
000:20:1 0x1002 0x4349
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x00008070 0x00000010
[OK]
000:20:3 0x1002 0x434c
[OK]
000:20:4 0x1002 0x4342
[OK]
000:20:5 0x1002 0x4341
10h mem 0xd8004400 0x00000100
[OK]
000:20:6 0x1002 0x434d
10h mem 0xd8004800 0x00000100
[OK]
001:05:0 0x1002 0x5c61
10h mem 0xe0000000 0x08000000
14h port 0x00009000 0x00000100
18h mem 0xd8100000 0x00010000
[OK]
002:03:0 0x104c 0x8023
10h mem 0xd8204000 0x00000800
14h mem 0xd8200000 0x00004000
[OK]
002:04:0 0x104c 0xac55
10h mem 0x00000000 0x00001000
[NG]
002:04:1 0x104c 0xac55
10h mem 0x00000000 0x00001000
[NG]
002:10:0 0x10ec 0x8139
10h port 0x0000a000 0x00000100
14h mem 0xd8204800 0x00000100
[OK]
--------------------------[ 2 devices bogus]
Physical memory end: 0x1ff6c000
PCI memory mapped I/O space start: 0x20000000
[PCIBIOS fixup stage]-----------------------
device vendor product
register space address size
--------------------------------------------
000:00:0 0x1002 0x5833
10h mem 0xdc000000 0x04000000
14h mem 0xd8000000 0x00001000
[OK]
000:01:0 0x1002 0x5838
[OK]
000:19:0 0x1002 0x4347
10h mem 0xd8001000 0x00001000
[OK]
000:19:1 0x1002 0x4348
10h mem 0xd8002000 0x00001000
[OK]
000:19:2 0x1002 0x4345
10h mem 0xd8003000 0x00001000
[OK]
000:20:0 0x1002 0x4353
10h port 0x00008060 0x00000010
14h mem 0xd8004000 0x00000400
[OK]
000:20:1 0x1002 0x4349
10h port 0x000001f0 0x00000008
14h port 0x000003f4 0x00000004
18h port 0x00000170 0x00000008
1ch port 0x00000374 0x00000004
20h port 0x00008070 0x00000010
[OK]
000:20:3 0x1002 0x434c
[OK]
000:20:4 0x1002 0x4342
[OK]
000:20:5 0x1002 0x4341
10h mem 0xd8004400 0x00000100
[OK]
000:20:6 0x1002 0x434d
10h mem 0xd8004800 0x00000100
[OK]
001:05:0 0x1002 0x5c61
10h mem 0xe0000000 0x08000000
14h port 0x00009000 0x00000100
18h mem 0xd8100000 0x00010000
[OK]
002:03:0 0x104c 0x8023
10h mem 0xd8204000 0x00000800
14h mem 0xd8200000 0x00004000
[OK]
002:04:0 0x104c 0xac55
10h mem 0x20000000 0x00001000
[OK]
002:04:1 0x104c 0xac55
10h mem 0x20001000 0x00001000
[OK]
002:10:0 0x10ec 0x8139
10h port 0x0000a000 0x00000100
14h mem 0xd8204800 0x00000100
[OK]
--------------------------[ 0 devices bogus]
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 3000.20 MHz, id 0xf29
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 16 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <PTLTD , RSDT ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpi: activated PNP0C0F
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A): ACPI Battery (Control Method)
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0A03 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0200 at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: using exception 16
PNP0000 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0100 at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (SYN0302): aux port
pckbc2: irq 12
PNP0C02 at acpi0 not configured
PNP0C01 at acpi0 not configured
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
lpt3 at acpi0 (PNP0401-0)
lpt3: io 0x378-0x37f,0x778-0x77f irq 7 drq 1
NSC6001 at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz1 at acpi0: ACPI Thermal Zone
acpitz1: unable to get polling interval; using default of 30.0s
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ATI Technologies product 0x5833 (rev. 0x02)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: ATI Technologies product 0x5838 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: ATI Technologies product 0x5c61 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ohci0 at pci0 dev 19 function 0: ATI Technologies product 0x4347 (rev. 0x01)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 19 function 1: ATI Technologies product 0x4348 (rev. 0x01)
ohci1: interrupting at irq 11
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 19 function 2: ATI Technologies product 0x4345 (rev. 0x01)
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI Technologie EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
ATI Technologies product 0x4353 (SMBus serial bus, revision 0x18) at pci0 dev
20 function 0 not configured
pciide0 at pci0 dev 20 function 1
pciide0: ATI Technologies product 0x4349 (rev. 0x00)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to compatibility mode
pciide0: primary channel interrupting at irq 14
atabus0 at pciide0 channel 0
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel interrupting at irq 15
atabus1 at pciide0 channel 1
pcib0 at pci0 dev 20 function 3
pcib0: ATI Technologies product 0x434c (rev. 0x00)
ppb1 at pci0 dev 20 function 4: ATI Technologies product 0x4342 (rev. 0x00)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
Texas Instruments TSB43AA22/A OHCI IEEE 1394 Host Controller
(Firewire serial bus, interface 0x10) at pci2 dev 3 function 0 not configured
cbb0 at pci2 dev 4 function 0: Texas Instruments PCI1520 PCI-CardBus Bridge
(rev. 0x01)
cbb1 at pci2 dev 4 function 1: Texas Instruments PCI1520 PCI-CardBus Bridge
(rev. 0x01)
rtk0 at pci2 dev 10 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:0a:e4:56:d2:e1
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0
pcmcia1 at cardslot1
ATI Technologies product 0x4341 (audio multimedia) at pci0 dev 20 function 5
not configured
ATI Technologies product 0x434d (modem communications, revision 0x01) at pci0
dev 20 function 6 not configured
isa0 at pcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Cypress Sem PS2/USB Browser Combo Mouse, rev 1.00/0.00, addr 2,
iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <ST94019A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <PIONEER DVD-RW DVR-K13RA, DFDL032435WL, 1.00>
cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)