Subject: Re: No response when do lptest > /dev/ulpt0...anything else to try?
To: None <gathorpe79@yahoo.com, netbsd-help@netbsd.org>
From: Mark Tamola <marktam264@hotmail.com>
List: netbsd-help
Date: 03/08/2005 15:53:32
>From: Gary Thorpe <gathorpe79@yahoo.com>
>To: Mark Tamola <marktam264@hotmail.com>, netbsd-help@netbsd.org
>Subject: Re: No response when do lptest > /dev/ulpt0...anything else to
>try?
>Date: Tue, 8 Mar 2005 14:54:43 -0500 (EST)
>
>
>--- Mark Tamola <marktam264@hotmail.com> wrote:
> > Thank you all for your kind suggestions. However, I'm still unable
> > to
> > print.
> >
> > I installed cups, per someone else's suggestions. Using pksrc, I
> > installed
> > the cups, cupsomatic, and cupsomatic-ppds packages (in that order).
> > I then
> > copied the example cupsd rc.d script to /etc/rc.d, and did a
> > /etc/rc.d/cupsd
> > start. It complained about $cupsd not set correctly, so I modified
> > /etc/rc.conf and added "cupsd=YES". I then did a /etc/rc.d/restart,
> > and it
> > started cupsd with no error messages/warnings. I then opened up
> > firefox and
> > got onto localhost:631 to connect to the cups web admin server. I
> > began to
> > configure my printer, but found that the driver for my printer, an HP
> > PSC
> > 1350 All-in-one, was not in the list. So, I went onto
> > www.linuxprinting.org
> > and found the .PPD file for the HP PSC 1310, which was the closest
> > one I
> > could find. I stuck the .PPD file in /usr/pkg/share/cups/model/HP.
> > I
> > restarted cupsd and re-logged onto the cupsd web admin server. I was
> > now
> > able to find the new driver for my printer, and so I selected it and
> > completed setting up the printer.
> >
> > Now, the printer was fully installed and configured with cups (I
> > think). So
> > I proceeded to try a test page and...nothing. No lights blinking, no
> > paper
> > cranking, no response.
> >
> > I'm pretty sure the problems I'm experiencing are at a NetBSD driver
> > level,
> > as I can't even do a "cat textfile.txt > /dev/ulpt0". It seems to me
> > that
> > the problem isn't even at the cups level, so I don't think it should
> > even
> > matter whether I use apsfilter, magicfilter, cups, LPRng, etc. so I
> > don't
> > think it would benefit me to go down the list trying each one. I
> > SHOULD be
> > able to do a "lptest > /dev/ulpt0" or something really low level like
> > that,
> > so what's the deal?
>
>Just because 'lptest > /dev/ulpt0' doesn't work does not really
>indicate anything. It doesn't work on many inkjets as was pointed out
>by someone else. It may in fact be too low-level for the printer to
>understand.
>
>Ghostscript supports the printer apparantly (the driver understands the
>LIDIL language used by your printer at least), so I would agree that
>the most likely problem is with the ulpt driver. The manual page for
>ulpt suggests trying ulpn instead (no reset on open). You could also
>try usbdevs(8) to see if netBSD is even detecting the printer. And of
>course, check the cables etc. Does the printer show up in your dmesg?
>Any messages when you plug it in/out?
>
>
>
>______________________________________________________________________
>Post your free ad now! http://personals.yahoo.ca
Sorry, I didn't include some of the original text from my first posting.
Yes, I read the documentation and tried doing a cat textfile to BOTH
/dev/ulpt0 and /dev/ulpn0, and both times got no response at all from the
printer. Yes, NetBSD is detecting the printer because I can see it in
dmesg, and I also see the green kernel messages telling me that it has been
unplugged/plugged when I physically unplug/plug it.
BTW, not that it matters, but yes the printer works under Windows 2000/XP,
as well as Linux (cups).
Anyone else have any suggestions?
Thanks,
-Mark