--wac7ysb48OaltWcw
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

Hi,

 I'm triyn to setup an Acer Extensa 501DX laptop with NetBSD. I downloaded de NetBSD 2.0 installation CD. I had to use the bootable laptop floppy because the CDs kernel always rebooted the machine with the spinning pipe.

 Now everything works but the pcmcia. In fact it doesn't recognice anything inserted I tried except for a USB2.0 PCMCIA card I have. I tried with a wifi BenQ card wich I use as wi0 in another NetBSD laptop with no problem and an Intel one that use as xi0 in the same other machine. So I need to complie a tweaked kernel to make a few tests. But every compiled kernel I do (including GENERIC and GENERIC_LAPTOP which is the one that is supossed to be running) reboots the laptop when the spinning pipe appears.

 I'd appreciate if anyone can give me any hint in what is making my kernels reboot and/or why are the pcmcia cards not recogniced. I attach dmesg output.

Regards

-- 
Zakhrin.

mailto:zakhrin@freeshell.org

SDF Public Access UNIX System - http://sdf.lonestar.org

--wac7ysb48OaltWcw
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg

NetBSD 2.0 (GENERIC_LAPTOP) #0: Wed Dec  1 11:01:08 UTC 2004
	builds@build:/big/builds/ab/netbsd-2-0-RELEASE/i386/200411300000Z-obj/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/i386/compile/GENERIC_LAPTOP
total memory = 32316 KB
avail memory = 25804 KB
BIOS32 rev. 0 found at 0xf0210
PCI BIOS rev. 2.1 found at 0xf0200
pcibios: config mechanism [1][x], special cycles [x][x], last bus 0
PCI IRQ Routing Table rev. 1.0 found at 0xfbad0, size 144 bytes (7 entries)
PCI Interrupt Router at 255:31:7
pci_intr_fixup: no compatible PCI ICU found
------------------------------------------
  device vendor product pin PIRQ IRQ stage
------------------------------------------
000:05:0 0x1217 0x6832   A  0x02   9  1    WARNING: preserving irq 10
000:05:1 0x1217 0x6832   B  0x03   9  1    WARNING: preserving irq 10
000:06:0 0x10c8 0x0004   A  0x04   -  0    WARNING: missing IRQ
000:15:0 0x10b9 0x5237   A  0x01  10  1    fixed up
------------------------------------------
PCI fixup examining 10b9:1531
PCI fixup examining 10b9:1533
PCI fixup examining 1217:6832
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 1217:6832
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI fixup examining 10c8:04
PCI fixup examining 10b9:5229
PCI fixup examining 10b9:7101
PCI fixup examining 10b9:5237
PCI bus #2 is the last bus
[System BIOS Setting]-----------------------
  device vendor product
  register space address    size
--------------------------------------------
000:00:0 0x10b9 0x1531 
		[OK]
000:02:0 0x10b9 0x1533 
		[OK]
000:05:0 0x1217 0x6832 
	10h mem  0x02000000 0x00001000
		[OK]
000:05:1 0x1217 0x6832 
	10h mem  0x02001000 0x00001000
		[OK]
000:06:0 0x10c8 0x0004 
	10h mem  0x03000000 0x01000000
	14h mem  0x04000000 0x00200000
	18h mem  0x04200000 0x00100000
		[OK]
000:11:0 0x10b9 0x5229 
	20h port 0x00006090 0x00000010
		[OK]
000:12:0 0x10b9 0x7101 
	10h port 0x0000f100 0x00000040
	14h port 0x0000f140 0x00000020
		[OK]
000:15:0 0x10b9 0x5237 
	10h mem  0x04300000 0x00001000
		[OK]
--------------------------[  0 devices bogus]
 Physical memory end: 0x01fec000
 PCI memory mapped I/O space start: 0x02000000
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium/MMX (Tillamook) (586-class), 266.63 MHz, id 0x582
cpu0: features 8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
cpu0: features 8001bf<MMX>
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Acer Labs M1531 Host-PCI Bridge (rev. 0xb3)
pcib0 at pci0 dev 2 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0x0a)
cbb0 at pci0 dev 5 function 0: O2 Micro, Inc. OZ6832/OZ6833 PCI-CardBus Bridge (rev. 0x34)
cbb1 at pci0 dev 5 function 1: O2 Micro, Inc. OZ6832/OZ6833 PCI-CardBus Bridge (rev. 0x34)
vga1 at pci0 dev 6 function 0: Neomagic MagicGraph 128XD (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
aceride0 at pci0 dev 11 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0x20)
aceride0: bus-master DMA support present
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at irq 14
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at irq 15
atabus1 at aceride0 channel 1
Acer Labs M7101 Power Management Controller (miscellaneous bridge, revision 0x09) at pci0 dev 12 function 0 not configured
ohci0 at pci0 dev 15 function 0: Acer Labs M5237 USB Host Controller (rev. 0x03)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
cbb0: interrupting at irq 10
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 10
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 2 device 0
pcmcia1 at cardslot1
apm0 at mainbus0: Power Management spec V1.2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
uhub1 at uhub0 port 1
uhub1: Prolific Technology Inc. USB Embedded Hub, class 9/0, rev 2.00/1.00, addr 2
uhub1: 1 port with 0 removable, self powered
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: Prolific Technology Inc. USB Mass Storage Device, rev 2.00/1.00, addr 3
umass0: using ATAPI over Bulk-Only
atapibus0 at umass0: 2 targets
sd0 at atapibus0 drive 0: <LG, X-tick 2.0, 1.00> disk removable
sd0: fabricating a geometry
sd0: 496 MB, 496 cyl, 64 head, 32 sec, 512 bytes/sect x 1015808 sectors
wd0 at atabus0 drive 0: <IBM-DKLA-23240>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 3102 MB, 6304 cyl, 16 head, 63 sec, 512 bytes/sect x 6354432 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
atapibus1 at atabus1: 2 targets
cd0 at atapibus1 drive 0: <CD-220EA, , 1.5A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(aceride0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
sd0: fabricating a geometry
sd0: fabricating a geometry
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 1 (using DMA data transfers)
wd0a: DMA error reading fsbn 4063568 of 4063568-4063583 (wd0 bn 4063631; cn 4031 tn 6 sn 5), retrying
wd0: soft error (corrected)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
sd0: fabricating a geometry

--wac7ysb48OaltWcw--