Hi,

I would like to configure XFree86 on a fresh installed NetBSD 2.0 i386
machine. 

What I have done so far:

On the command line, under root, I used the command # XFree86 -configure
to create a configuration file.
Then I´ve opened the XF86Config.new file in the /root directory with a Text
Editor to modify it with the appropriate settings for my machine.
The Graphic card is a ATI Xpert 98. 

Below you can find the modified configuration file:

Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "record"
	Load  "dbe"
	Load  "glx"
	Load  "xtrap"
	Load  "extmod"
	Load  "type1"
	Load  "speedo"
EndSection

Section "InputDevice"
	Identifier  "Main Keyboard"
	Driver      "keyboard"
        Option      "XkbRules" "xfree86"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "de_DE"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "wsmouse"
	Option	    "Device" "/dev/wsmouse"
        Option      "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Yakumo"
	ModelName    "unknown"
        HorizSync    30-64
        VertRefresh  50-100
        Option       "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "accel"              	# [<bool>]
        #Option     "crt_display"        	# [<bool>]
        #Option     "composite_sync"     	# [<bool>]
        #Option     "hw_cursor"          	# [<bool>]
        #Option     "linear"             	# [<bool>]
        #Option     "mmio_cache"         	# [<bool>]
        #Option     "test_mmio_cache"    	# [<bool>]
        #Option     "panel_display"      	# [<bool>]
        #Option     "probe_clocks"       	# [<bool>]
        #Option     "reference_clock"    	# <freq>
        #Option     "shadow_fb"          	# [<bool>]
        #Option     "sw_cursor"          	# [<bool>]
	Identifier  "Card0"
	Driver      "ati"
	VendorName  "ATI"
	BoardName   "3D Rage Pro AGP 1X/2X"
	ChipSet     "ati"
	ChipId      0x4742
	ChipRev     0x5c
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
        DefaultDepsth     24
	SubSection "Display"
           Viewport 0 0
	   Depth   24
           Modes   "800x600"	
	EndSubSection
EndSection

To test the file I used the command # XFree86 -xf86config XF86Config.new.
But the XFree86 test screen did not came up. In the XFree86 log file from
/var/log I have the following lines at the end:

Fatal server error:
no screens found

If necessary, I can provide the hole log file for analysis.

Thanks in advance for your help.

Regards

Carsten




-- 
Handyrechnung zu hoch? Tipp: SMS und MMS mit GMX
Seien Sie so frei: Alle Infos unter http://www.gmx.net/de/go/freesms