RE: Support for Supermicro X10DRL-C

[Derrick Lobo <derrick%givex.com@localhost>]

Anyone can provide any updates on this, have I contacted the correct netbsd
port..

 

Jaromir/Masanobu adding you both in since you assisted with the pervious
hardware. 

 

Derrick

 

From: Derrick Lobo <derrick%givex.com@localhost> 
Sent: Tuesday, October 30, 2018 11:03 AM
To: netbsd-users%NetBSD.org@localhost; port-amd64%netbsd.org@localhost; netbsd-ports%netbsd.org@localhost;
tech-ports%netbsd.org@localhost
Subject: Support for Supermicro X10DRL-C

 

Managed to get my hands on this new hardware,  added a SAS card to get the
disks recognized  however noticed that netbsd shows only one CPU.. the
server has 2 CPU and should total 70 cores tried this with netbsd 7.2 , 8
and then 8.0current from Oct22

 

Im able to see all cores when I use  the iso for freebsd 11.2

 

Here is the dmesg Also wondering if the fix will be ported to netbsd 8 or
will this 8.1 or 9

 

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,

    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,

    2018 The NetBSD Foundation, Inc.  All rights reserved.

Copyright (c) 1982, 1986, 1989, 1991, 1993

    The Regents of the University of California.  All rights reserved.

 

NetBSD 8.0_STABLE (GENERIC) #0: Mon Oct 22 07:42:27 UTC 2018

        mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
<mailto:mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC> 

total memory = 127 GB

avail memory = 124 GB

cpu_rng: RDSEED

timecounter: Timecounters tick every 10.000 msec

Kernelized RAIDframe activated

running cgd selftest aes-xts-256 aes-xts-512 done

timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100

Supermicro Super Server (0123456789)

mainbus0 (root)

cpu0 at mainbus0

cpu0: Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz, id 0x406f1

cpu0: package 0, core 0, smt 0

ipmi0 at mainbus0

pci0 at mainbus0 bus 0: configuration mode 1

pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok

pchb0 at pci0 dev 0 function 0: vendor 8086 product 6f00 (rev. 0x01)

ppb0 at pci0 dev 1 function 0: vendor 8086 product 6f02 (rev. 0x01)

ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8
@ 8.0GT/s

pci1 at ppb0 bus 1

pci1: i/o space, memory space enabled, rd/line, wr/inv ok

vendor 1000 product 005d (RAID mass storage, revision 0x02) at pci1 dev 0
function 0 not configured

ppb1 at pci0 dev 2 function 0: vendor 8086 product 6f04 (rev. 0x01)

ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8
@ 8.0GT/s

pci2 at ppb1 bus 2

pci2: i/o space, memory space enabled, rd/line, wr/inv ok

ppb2 at pci0 dev 2 function 2: vendor 8086 product 6f06 (rev. 0x01)

ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8
@ 8.0GT/s

ppb2: link is x8 @ 5.0GT/s

pci3 at ppb2 bus 3

pci3: i/o space, memory space enabled, rd/line, wr/inv ok

mfi0 at pci3 dev 0 function 0: vendor 0x1000 product 0x9240

mfi0: interrupting at irq 11

mfi0: MegaRAID SAS MR9240-8i version 20.5.1-0003

mfi0: logical drives 1, 0MB RAM, BBU not present

scsibus0 at mfi0: 64 targets, 8 luns per target

ppb3 at pci0 dev 3 function 0: vendor 8086 product 6f08 (rev. 0x01)

ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16
@ 8.0GT/s

pci4 at ppb3 bus 4

pci4: i/o space, memory space enabled, rd/line, wr/inv ok

vendor 8086 product 6f20 (miscellaneous system, revision 0x01) at pci0 dev 4
function 0 not configured

vendor 8086 product 6f21 (miscellaneous system, revision 0x01) at pci0 dev 4
function 1 not configured

vendor 8086 product 6f22 (miscellaneous system, revision 0x01) at pci0 dev 4
function 2 not configured

vendor 8086 product 6f23 (miscellaneous system, revision 0x01) at pci0 dev 4
function 3 not configured

vendor 8086 product 6f24 (miscellaneous system, revision 0x01) at pci0 dev 4
function 4 not configured

vendor 8086 product 6f25 (miscellaneous system, revision 0x01) at pci0 dev 4
function 5 not configured

vendor 8086 product 6f26 (miscellaneous system, revision 0x01) at pci0 dev 4
function 6 not configured

vendor 8086 product 6f27 (miscellaneous system, revision 0x01) at pci0 dev 4
function 7 not configured

vendor 8086 product 6f28 (miscellaneous system, revision 0x01) at pci0 dev 5
function 0 not configured

vendor 8086 product 6f29 (miscellaneous system, revision 0x01) at pci0 dev 5
function 1 not configured

vendor 8086 product 6f2a (miscellaneous system, revision 0x01) at pci0 dev 5
function 2 not configured

vendor 8086 product 6f2c (interrupt system, IO(x) APIC, revision 0x01) at
pci0 dev 5 function 4 not configured

vendor 8086 product 8d7c (undefined, subclass 0x00, revision 0x05) at pci0
dev 17 function 0 not configured

xhci0 at pci0 dev 20 function 0: vendor 8086 product 8d31 (rev. 0x05)

xhci0: interrupting at irq 11

xhci0: xHCI version 1.0

usb0 at xhci0: USB revision 3.0

usb1 at xhci0: USB revision 2.0

vendor 8086 product 8d3a (miscellaneous communications, revision 0x05) at
pci0 dev 22 function 0 not configured

vendor 8086 product 8d3b (miscellaneous communications, revision 0x05) at
pci0 dev 22 function 1 not configured

ehci0 at pci0 dev 26 function 0: vendor 8086 product 8d2d (rev. 0x05)

ehci0: interrupting at irq 5

ehci0: BIOS has given up ownership

ehci0: EHCI version 1.0

usb2 at ehci0: USB revision 2.0

ppb4 at pci0 dev 28 function 0: vendor 8086 product 8d10 (rev. 0xd5)

ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1
@ 5.0GT/s

ppb4: link is x1 @ 2.5GT/s

pci5 at ppb4 bus 5

pci5: i/o space, memory space enabled, rd/line, wr/inv ok

ppb5 at pci5 dev 0 function 0: vendor 1a03 product 1150 (rev. 0x03)

ppb5: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>

pci6 at ppb5 bus 6

pci6: i/o space, memory space enabled, rd/line, wr/inv ok

vga0 at pci6 dev 0 function 0: vendor 1a03 product 2000 (rev. 0x30)

wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)

wsmux1: connecting to wsdisplay0

drm at vga0 not configured

ppb6 at pci0 dev 28 function 2: vendor 8086 product 8d14 (rev. 0xd5)

ppb6: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1
@ 5.0GT/s

ppb6: link is x1 @ 2.5GT/s

pci7 at ppb6 bus 7

pci7: i/o space, memory space enabled, rd/line, wr/inv ok

wm0 at pci7 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 0x03)

wm0: interrupting at irq 5

wm0: PCI-Express bus

wm0: 2048 words FLASH(HW), version 3.25, Image Unique ID 000005cc

wm0: Ethernet address ac:1f:6b:67:b0:8e

wm0: Copper

wm0: 0x8014500<FLASH_HW,IOH_VALID,PCIE,NEWQUEUE>

ukphy0 at wm0 phy 1: OUI 0x000ac2, model 0x0000, rev. 0

ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto

ppb7 at pci0 dev 28 function 3: vendor 8086 product 8d16 (rev. 0xd5)

ppb7: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1
@ 5.0GT/s

ppb7: link is x1 @ 2.5GT/s

pci8 at ppb7 bus 8

pci8: i/o space, memory space enabled, rd/line, wr/inv ok

wm1 at pci8 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 0x03)

wm1: interrupting at irq 11

wm1: PCI-Express bus

wm1: 2048 words FLASH(HW), version 3.25, Image Unique ID 000005d0

wm1: Ethernet address ac:1f:6b:67:b0:8f

wm1: Copper

wm1: 0x8014500<FLASH_HW,IOH_VALID,PCIE,NEWQUEUE>

ukphy1 at wm1 phy 1: OUI 0x000ac2, model 0x0000, rev. 0

ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto

ehci1 at pci0 dev 29 function 0: vendor 8086 product 8d26 (rev. 0x05)

ehci1: interrupting at irq 5

ehci1: BIOS has given up ownership

ehci1: EHCI version 1.0

usb3 at ehci1: USB revision 2.0

ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 8d44 (rev. 0x05)

timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000

ichlpcib0: 24-bit timer

tco0 at ichlpcib0: TCO (watchdog) timer configured.

tco0: Min/Max interval 1/367 seconds

ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 8d02 (rev. 0x05)

ahcisata0: interrupting at irq 11

ahcisata0: 64-bit DMA

ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP
0xc330ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>

atabus0 at ahcisata0 channel 0

atabus1 at ahcisata0 channel 1

atabus2 at ahcisata0 channel 2

atabus3 at ahcisata0 channel 3

atabus4 at ahcisata0 channel 4

atabus5 at ahcisata0 channel 5

ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 8d22 (rev. 0x05)

ichsmb0: interrupting at irq 5

iic0 at ichsmb0: I2C bus

isa0 at ichlpcib0

com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo

com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo

pckbc0 at isa0 port 0x60-0x64

pckbd0 at pckbc0 (kbd slot)

pckbc0: using irq 1 for kbd slot

wskbd0 at pckbd0: console keyboard, using wsdisplay0

pms0 at pckbc0 (aux slot)

pckbc0: using irq 12 for aux slot

wsmouse0 at pms0 mux 0

attimer0 at isa0 port 0x40-0x43

pcppi0 at isa0 port 0x61

spkr0 at pcppi0: PC Speaker

midi0 at pcppi0: PC speaker

sysbeep0 at pcppi0

attimer0: attached to pcppi0

coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105

timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0

timecounter: Timecounter "TSC" frequency 2200090400 Hz quality 3000

scsibus0: waiting 2 seconds for devices to settle...

uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev
1.00/1.00, addr 0

uhub0: 6 ports with 6 removable, self powered

uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev
2.00/1.00, addr 0

uhub1: 15 ports with 15 removable, self powered

IPsec: Initialized Security Association Processing.

uhub2 at usb2: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev
2.00/1.00, addr 1

uhub2: 2 ports with 2 removable, self powered

uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev
2.00/1.00, addr 1

uhub3: 2 ports with 2 removable, self powered

ahcisata0 port 3: device present, speed: 6.0Gb/s

ahcisata0 port 4: device present, speed: 1.5Gb/s

wd0 at atabus3 drive 0

wd0: <Samsung SSD 860 EVO 500GB>

wd0: drive supports 1-sector PIO transfers, LBA48 addressing

wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors

wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)

wd0(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
(Ultra/133) (using DMA)

atapibus0 at atabus4: 1 targets

uhub4 at uhub1 port 11: ALCOR (0x58f) Generic USB Hub (0x9254), class 9/0,
rev 1.10/3.12, addr 1

cd0 at atapibus0 drive 0: <Slimtype DVD A  DS8ACSH, 435740502456, LP5M>
cdrom removable

uhub4: 4 ports with 4 removable, self powered

cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)

cd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
(Ultra/133) (using DMA)

sd0 at scsibus0 target 0 lun 0: <LSI, MR9240-8i, 2.70> disk fixed

sd0: fabricating a geometry

sd0: 7152 GB, 7324218 cyl, 64 head, 32 sec, 512 bytes/sect x 14999998464
sectors

sd0: fabricating a geometry

sd0: GPT GUID: f6eb22a4-2e03-441c-9bef-6160a7f2224f

dk0 at sd0: "00b3120b-939a-46c8-a153-eae53d5c7c44", 14999998397 blocks at
34, type: ffs

sd0: tagged queueing

uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 8002 (0x8002), class
9/0, rev 2.00/0.05, addr 2

uhub5: single transaction translator

uhub6 at uhub2 port 1: vendor 8087 (0x8087) product 800a (0x800a), class
9/0, rev 2.00/0.05, addr 2

uhub6: single transaction translator

uhub5: 8 ports with 8 removable, self powered

uhub6: 6 ports with 6 removable, self powered

uhidev0 at uhub4 port 1 configuration 1 interface 0

uhidev0: Logitech (0x46d) USB Keyboard (0xc31c), rev 1.10/64.00, addr 2,
iclass 3/1

ukbd0 at uhidev0

wskbd1 at ukbd0 mux 1

wskbd1: connecting to wsdisplay0

uhidev1 at uhub4 port 1 configuration 1 interface 1

uhidev1: Logitech (0x46d) USB Keyboard (0xc31c), rev 1.10/64.00, addr 2,
iclass 3/0

uhidev1: 3 report ids

uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0

uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0

uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0

uhidev2 at uhub4 port 2 configuration 1 interface 0

uhidev2: Logitech (0x46d) USB-PS/2 Optical Mouse (0xc040), rev 2.00/24.30,
addr 3, iclass 3/1

ums0 at uhidev2: 8 buttons, W and Z dirs

wsmouse1 at ums0 mux 0

uhidev3 at uhub4 port 3 configuration 1 interface 0

uhidev3: No brand (0x10d5) 2Port KVMSwicther (0x55a2), rev 1.10/1.00, addr
4, iclass 3/0

ukbd1 at uhidev3

wskbd2 at ukbd1 mux 1

wskbd2: connecting to wsdisplay0

uhidev4 at uhub4 port 3 configuration 1 interface 1

uhidev4: No brand (0x10d5) 2Port KVMSwicther (0x55a2), rev 1.10/1.00, addr
4, iclass 3/0

uhidev4: no input interrupt endpoint

uhub7 at uhub1 port 14: vendor 0000 (0000) product 0001 (0x01), class 9/0,
rev 2.00/0.00, addr 5

uhub7: single transaction translator

uhub7: 4 ports with 3 removable, self powered

uhidev5 at uhub7 port 1 configuration 1 interface 0

uhidev5: vendor 0557 (0x557) product 2419 (0x2419), rev 1.10/1.00, addr 6,
iclass 3/1

ukbd2 at uhidev5

wskbd3 at ukbd2 mux 1

wskbd3: connecting to wsdisplay0

uhidev6 at uhub7 port 1 configuration 1 interface 1

uhidev6: vendor 0557 (0x557) product 2419 (0x2419), rev 1.10/1.00, addr 6,
iclass 3/1

ums1 at uhidev6: 3 buttons and Z dir

wsmouse2 at ums1 mux 0

pad0: outputs: 44100Hz, 16-bit, stereo

audio0 at pad0: half duplex, playback, capture, mmap

pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2,
frequency 44100

pad0: Latency: 139 milliseconds

spkr1 at audio0: PC Speaker (synthesized)

WARNING: 1 error while detecting hardware; check system log.

boot device: wd0

root on wd0a dumps on wd0b

root file system type: ffs

kern.module.path=/stand/amd64/8.0/modules

wsdisplay0: screen 1 added (80x25, vt100 emulation)

wsdisplay0: screen 2 added (80x25, vt100 emulation)

wsdisplay0: screen 3 added (80x25, vt100 emulation)

wsdisplay0: screen 4 added (80x25, vt100 emulation)

ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1

 

 

Derrick Lobo