Subject: Question on "request sense failed" message on siop
To: None <netbsd-users@netbsd.org>
From: Bri <itai@replic.net>
List: netbsd-users
Date: 05/08/2002 09:49:17
(already sent to port-i386, but not suere if it got though.)
I've got a NetBSD 1.5.2 stable box with a 53c895 SCSI HBA on it. During
bootup, with a Seagate (and only this Seagate) drive attached I get this
message that says "request sense failed."
Its odd though, because the drive is currentley the / partition and seems
to function fine. Just wondering if anyone knew if this was something to
worry about or if they knew exactley what this means.
Dmesg below .. Thanks in advance.
siop0: switching to single-ended mode
scsibus0: waiting 2 seconds for devices to settle...
siop0: target 0 using tagged queuing
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST39204LC, 0005> SCSI3 0/direct
fixed
siop0: target 0 using 16bit transfers
siop0: target 0 now synchronous at 20.0Mhz, offset 31
sd0: 8683 MB, 14384 cyl, 3 head, 412 sec, 512 bytes/sect x 17783239
sectors
request sense failed
request sense failed
itai at replic d0t net