netstat -arn give me

aa.bb.cc.198      aa.bb.cc.197      UH          0        0   1500  ppp0
aa.bb.cc.198      00:01:02:a2:a5:3f  UHLS2       0        0   1500  ex1


vtund.conf says

# Assign IP addresses 10.0.0.1 - local, 10.0.0.2 - remote
ppp "aa.bb.cc.197:aa.bb.cc.198 proxyarp";


It seems I can ping 197 from the outside, but no ports available. Inside 
the aa.bb.cc.dd/26 I can't ping it. On B I can do everything to 198.


How is this handled in ipfilter in B? Must I open access for ppp0 or
something?



Regards,
Mattias.


Manuel Bouyer wrote:
> On Thu, Jul 25, 2002 at 01:41:13PM +0200, Mattias Karlsson wrote:
> 
>>Okay, so I made a cute little drawing:
>>
>>http://keihan.sergei.cc/pictures/net-setup.jpg
>>
>>What I want is D mapping to A via B (correct?), performance is not 
>>important. Availability is important tho. I tried to setup vtun 
>>yesterday, made it work a bit... Problem was that only B (vtund -s)
>>made it to D (A), that worked great tho!. I want all boxes behind B to 
>>have access, and the whole Internet too... :)
>>
>>What is local and what is remote when setting up IPs in the vtun ppp 
>>section on the server-side?
>>
>>If someone didn't understand this, I want to have access to A (D) from
>>work and from other places (I want D to have a public IP)...
>>
>>
>>Let me know if you want my vtund.conf too...
> 
> 
> What does your routing table looks like on A and B ?
> 


-- 
- Mattias Karlsson
- Teknisk Support
- mattias.karlsson@nocom.se
- http://www.nocom.se
- 018 65 55 00 (växel)
- 018 65 55 92 (direkt)
- 018 65 55 55 (fax)
- Nocom AB
- Axel Johanssons gata 4
- Kristallen, 754 51 UPPSALA