Subject: is this all supported by 1.6.1?
To: None <netbsd-users@netbsd.org>
From: Steve Bellovin <smb@research.att.com>
List: netbsd-users
Date: 04/03/2003 06:48:37
I'm contemplating getting a new machine that's currently running
FreeBSD. Are all of these devices supported by NetBSD 1.6?
Is it likely to work with a serial console?
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RC #1: Sat Mar 22 19:45:16 GMT 2003
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel Pentium III (847.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 535756800 (523200K bytes)
config> q
avail memory = 518385664 (506236K bytes)
Preloaded elf kernel "kernel" at 0xc02e5000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02e509c.
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810E (i810E GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82810E (i810E GMCH) SVGA controller> mem 0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x3400-0x347f mem 0xf4121000-0xf412107f irq 5 at device 7.0 on pci1
xl0: Ethernet address: 00:04:76:18:ef:7a
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3800-0x383f mem 0xf4100000-0xf411ffff,0xf4120000-0xf4120fff irq 9 at device 8.0 on pci1
fxp0: Ethernet address 00:30:05:0a:25:1b
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0x2000-0x200f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82801AA (ICH) USB controller> at 31.2 irq 9
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 5
chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port 0x1c00-0x1c3f,0x1000-0x10ff irq 5 at device 31.5 on pci0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xc9fff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ad0: 28629MB <WDC WD300AB-00BVA0> [58168/16/63] at ata0-master UDMA66
--Steve Bellovin, http://www.research.att.com/~smb (me)
http://www.wilyhacker.com (2nd edition of "Firewalls" book)