Steven M. Bellovin wrote:

>In message <41DF1848.6090001@vmicrosistemas.com>, Francisco Valladolid writes:
>  
>
>>Hi, folks
>>
>>I have a Lucent WAVE LAN wireless PCMCIA card, i'am testint this in my 
>>IBM T21 Laptop, also i has read the document in the netbsd web site 
>>about the config this card, but until now, i can't configure this.
>>
>>The procedure is the next:
>>
>>1.- I'am running NetBSD 2.0 rel.
>>2,- I have a Linksys access point. conected to hub Linksys also, the IP 
>>for this access point is: 192.168.1.x
>>3.-  My laptop has the wireless card attached in the slot 1, then, i do 
>>the following.
>>
>>
>>/home/ficovh $> sudo ifconfig wi0 ssid  <some>
>>/home/ficovh $> sudo ifconfig wi0 chan 6
>>/home/ficovh $> sudo ifconfig wi0 inet 192.168.1.x netmask 0xffffff00 
>>media autoselect
>>
>>The access point is conected and working.
>>
>>My wi card is active with IP set.
>>
>>now, i can't ping to other machines in the internal net. Can some help o 
>>sugestions.
>>
>>Best Regards.
>>
>>Fco. Valladolid.
>>
>>
>>    
>>
>You definitely don't need to set 'chan'.  What does it say if you just 
>run 'ifconfig wi0'?  (And what release of NetBSD is this?)
>
>		--Prof. Steven M. Bellovin, http://www.cs.columbia.edu/~smb
>
>
>
>  
>
Hi, Thaks for your seugestions and replys. my Lucent Card now has 
configured correctly, .. only a logic problem, my IBM T21 has a Intel 
(fxp0) Ethernet card, then I assign other addres eg: 10.0.0.1 to this, 
and 192.168.1.x to wi0 (lucent), the problem was resolved, and The card 
work excellent.

Thanks and Regards.

Fco. Valladolid
    http://bsdguy.homeunix.org