Re: Panic on boot with SSP kernel (5.0_RC1/i386)

[Hugo Silva <hugo%barafranca.com@localhost>]

Christos Zoulas wrote:
> In article <498C9364.7000206%barafranca.com@localhost>,
> Hugo Silva  <hugo%barafranca.com@localhost> wrote:
>   
> > Adam Hoka wrote:
> >     
> > > Hugo Silva wrote:
> > >
> > >   
> > >       
> > > > Hi,
> > > >
> > > > While experimenting with 5.0, I tried recompiling GENERIC with SSP 
> > > > support. This lead to a panic while booting:
> > > >
> > > > "panic: stack overflow detected; terminated"
> > > >
> > > > Being new to NetBSD I am not sure if this is a known issue or not. Any 
> > > > thoughts ?
> > > >
> > > > Thanks,
> > > >
> > > > Hugo
> > > >     
> > > >         
> > > Well, for a start: when did you get that? :-)
> > >
> > > --
> > > When in doubt, use brute force.
> > >
> > > Adam Hoka <ahoka%NetBSD.org@localhost>
> > > Adam Hoka <ahoka%MirBSD.de@localhost>
> > > Adam Hoka <adam.hoka%gmail.com@localhost>
> > >   
> > >       
> > Right after com1 shows up on the screen.
> >
> > If you meant actual time, today - with both GENERIC and my 1st attempt 
> > at a custom NetBSD kernel; both panic.
> >     
>
> turn on ddb and get us a stack trace?
>
> christos
>
>   



Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
   2006, 2007, 2008
   The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
   The Regents of the University of California.  All rights reserved.

NetBSD 5.0_RC1 (LUCIA-20090205) #4: Thu Feb  5 20:40:01 WET 2009
       root@lucia:/usr/src/sys/arch/i386/compile/LUCIA
total memory = 255 MB
avail memory = 246 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
MICRO-STAR INTERNATIONAL CO., LTD MS-6528 ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1500MHz, id 0xf12
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <MSISYS,MSI ACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
ECP1 (PNP0401) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
GAME (PNPB02F) at acpi0 not configured
MIDI (PNPB006) at acpi0 not configured
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 100.0C critical 100.1C 
passive 21.8C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x1a30 (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x1a31 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x10de product 0x002d (rev. 0x15)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x12)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
vendor 0x1095 product 0x3112 (RAID mass storage, revision 0x02) at pci2 
dev 1 function 0 not configured
vendor 0x14f1 product 0x2f11 (miscellaneous communications, revision 
0x01) at pci2 dev 2 function 0 not configured
rtk0 at pci2 dev 5 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 17
rtk0: Ethernet address 00:e0:7d:93:15:ab
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cmpci0 at pci2 dev 9 function 0: vendor 0x13f6 product 0x0111 (rev. 0x10)
cmpci0: interrupting at ioapic0 pin 21
audio0 at cmpci0: full duplex, mmap, independent
opl0 at cmpci0: model OPL3: LR swapped
midi at opl0 not configured
mpu at cmpci0 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2440 (rev. 0x12)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801BA IDE Controller (ICH2) (rev. 0x12)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2442 (rev. 0x12)
uhci0: interrupting at ioapic0 pin 19
usb0 at uhci0: USB revision 1.0
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2443 (rev. 0x12)
ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
uhci1 at pci0 dev 31 function 4: vendor 0x8086 product 0x2444 (rev. 0x12)
uhci1: interrupting at ioapic0 pin 23
usb1 at uhci1: USB revision 1.0
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
panic: stack overflow detected; terminated
fatal breakpoint trap in supervisor mode
trap type 1 code 0 eip c034ebbc cs 8 eflags 246 cr2 0 ilevel 0
Stopped in pid 0.1 (system) at netbsd:breakpoint+0x4: popl %ebp
db{0}> trace
breakpoint(c04561c3,c0562c44,c0478240,0,c043b42b,0,c0562c58,c03df896,0,c046ea80) 
at netbsd:breakpoint+0x4
panic(c044b374,0,0,c0562c80,55f000,f3db9795,c0562ca8,c0271009,0,20) at 
netbsd:panic+0x1ab
start_init(0,20,0,0,c0562da0,55f000,293,c034e7b3,f3db9795,96ef8026) at 
netbsd:start_init
main(55f000,566000,c0562ce8,c0261394,0,c055f00c,c0562ce8,c0314355,c04c8360,0) 
at netbsd:main
configure(c04afb80,a,14,f9300,0,0,0,0,0,0) at netbsd:configure+0x4c
main(0,c01002a7,0,0,0,0,0,0,0,0) at netbsd:main+0x1b6
db{0}>


Thanks,

Hugo