Re: Panic on boot with SSP kernel (5.0_RC1/i386)

[Hugo Silva <hugo%barafranca.com@localhost>]

Christos Zoulas wrote:
> On Feb 9,  3:46pm, hugo%barafranca.com@localhost (Hugo Silva) wrote:
> -- Subject: Re: Panic on boot with SSP kernel (5.0_RC1/i386)
>
> | >> If you meant actual time, today - with both GENERIC and my 1st attempt 
> | >> at a custom NetBSD kernel; both panic.
> | >>     
> | >
> | > turn on ddb and get us a stack trace?
> | >
> | > christos
> | 
>
> Thanks! Do you know what gets configured next on a non ssp kernel (after com1)?
>
> christos
>   
-rwxr-xr-x  1 root  wheel  11423264 Feb  5 18:47 /netbsd.generic
-rwxr-xr-x  1 root  wheel   3893877 Feb  5 20:40 /netbsd
-rwxr-xr-x  1 root  wheel   4213432 Feb  9 14:21 /netbsd.ssp


(...)
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0: <ST3250824A>
wd0: quirks 2<FORCE_LBA48>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using 
DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM  SC-152L, , C100> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd1 at atabus1 drive 1: <ST3250824A>
wd1: quirks 2<FORCE_LBA48>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
wd1(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)


Thanks,

Hugo