RE: NetBSD on HP ML110 G6

To: <tron%zhadum.org.uk@localhost>
Subject: RE: NetBSD on HP ML110 G6
From: Tom Taylor <exilkoelner%hotmail.com@localhost>
Date: Fri, 22 Jul 2011 05:43:24 +0200
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,   
 2006, 2007, 2008, 2009, 2010    The NetBSD Foundation, Inc.  All rights 
reserved.Copyright (c) 1982, 1986, 1989, 1991, 1993    The Regents of the 
University of California.  All rights reserved.
NetBSD 5.1 (GENERIC) #0: Sat Nov  6 13:19:33 UTC 2010       
 builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RELEASE/amd64/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/amd64/compile/GENERICtotal
 memory = 9207 MBavail memory = 8911 MBtimecounter: Timecounters tick every 
10.000 msectimecounter: Timecounter "i8254" frequency 1193182 Hz quality 
100SMBIOS rev. 2.6 @ 0xdf010 (52 entries)HP ProLiant ML110 G6 (       )mainbus0 
(root)cpu0 at mainbus0 apid 0: Intel 686-class, 2394MHz, id 0x106e5cpu1 at 
mainbus0 apid 2: Intel 686-class, 2394MHz, id 0x106e5cpu2 at mainbus0 apid 4: 
Intel 686-class, 2394MHz, id 0x106e5cpu3 at mainbus0 apid 6: Intel 686-class, 
2394MHz, id 0x106e5ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 
pinsacpi0 at mainbus0: Intel ACPICA 20080321acpi0: X/RSDT: OemId <HP   
 ,ProLiant,06040000>, AslId < LTP,00000000>acpi0: SCI interrupting at int 
9acpi0: fixed-feature power button presenttimecounter: Timecounter "ACPI-Fast" 
frequency 3579545 Hz quality 1000ACPI-Fast 24-bit timerhpet0 at acpi0 (HPET, 
PNP0103): mem 0xfed00000-0xfed003ff irq 0,8timecounter: Timecounter "hpet0" 
frequency 14318179 Hz quality 2000pcppi1 at acpi0 (SPKR, PNP0800): io 0x61midi0 
at pcppi1: PC speaker (CPU-intensive output)sysbeep0 at pcppi1attimer1 at acpi0 
(TIME, PNP0100): io 0x40-0x43,0x50-0x53COMA (PNP0501) at acpi0 not 
configuredMI0 (IPI0001) at acpi0 not configuredMI1 (HPQ000B) at acpi0 not 
configuredacpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Buttonattimer1: 
attached to pcppi1ipmi0 at mainbus0pci0 at mainbus0 bus 0: configuration mode 
1pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv okpchb0 at 
pci0 dev 0 function 0pchb0: vendor 0x8086 product 0xd130 (rev. 0x11)ppb0 at 
pci0 dev 3 function 0: vendor 0x8086 product 0xd138 (rev. 0x11)ppb0: 
unsupported PCI Express versionpci1 at ppb0 bus 1pci1: i/o space, memory space 
enabled, rd/line, wr/inv okvendor 0x8086 product 0xd155 (miscellaneous system, 
revision 0x11) at pci0 dev 8 function 0 not configuredvendor 0x8086 product 
0xd156 (miscellaneous system, revision 0x11) at pci0 dev 8 function 1 not 
configuredvendor 0x8086 product 0xd157 (miscellaneous system, revision 0x11) at 
pci0 dev 8 function 2 not configuredvendor 0x8086 product 0xd158 (miscellaneous 
system, revision 0x11) at pci0 dev 8 function 3 not configuredvendor 0x8086 
product 0xd150 (miscellaneous system, revision 0x11) at pci0 dev 16 function 0 
not configuredvendor 0x8086 product 0xd151 (miscellaneous system, revision 
0x11) at pci0 dev 16 function 1 not configuredehci0 at pci0 dev 26 function 0: 
vendor 0x8086 product 0x3b3c (rev. 0x05)ehci0: interrupting at ioapic0 pin 
16ehci0: EHCI version 1.0usb0 at ehci0: USB revision 2.0ppb1 at pci0 dev 28 
function 0: vendor 0x8086 product 0x3b42 (rev. 0x05)ppb1: unsupported PCI 
Express versionpci2 at ppb1 bus 16pci2: i/o space, memory space enabled, 
rd/line, wr/inv okre0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit 
Ethernet (rev. 0x01)re0: interrupting at ioapic0 pin 16re0: Ethernet address 
74:ea:3a:80:06:28re0: using 256 tx descriptorsrgephy0 at re0 phy 7: 
RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2rgephy0: 10baseT, 
10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, autoppb2 at 
pci0 dev 28 function 1: vendor 0x8086 product 0x3b44 (rev. 0x05)ppb2: 
unsupported PCI Express versionpci3 at ppb2 bus 26pci3: no spaces enabled!ppb3 
at pci0 dev 28 function 2: vendor 0x8086 product 0x3b46 (rev. 0x05)ppb3: 
unsupported PCI Express versionpci4 at ppb3 bus 28pci4: i/o space, memory space 
enabled, rd/line, wr/inv okvga0 at pci4 dev 0 function 0: vendor 0x102b product 
0x0522 (rev. 0x02)wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 
emulation)wsmux1: connecting to wsdisplay0drm at vga0 not configuredppb4 at 
pci0 dev 28 function 3: vendor 0x8086 product 0x3b48 (rev. 0x05)ppb4: 
unsupported PCI Express versionpci5 at ppb4 bus 30pci5: i/o space, memory space 
enabled, rd/line, wr/inv okvendor 0x14e4 product 0x165b (ethernet network, 
revision 0x10) at pci5 dev 0 function 0 not configuredppb5 at pci0 dev 28 
function 4: vendor 0x8086 product 0x3b4a (rev. 0x05)ppb5: unsupported PCI 
Express versionpci6 at ppb5 bus 32pci6: no spaces enabled!ehci1 at pci0 dev 29 
function 0: vendor 0x8086 product 0x3b34 (rev. 0x05)ehci1: interrupting at 
ioapic0 pin 23ehci1: EHCI version 1.0usb1 at ehci1: USB revision 2.0ppb6 at 
pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa5)pci7 at ppb6 
bus 48pci7: i/o space, memory space enabledpcib0 at pci0 dev 31 function 
0pcib0: vendor 0x8086 product 0x3b14 (rev. 0x05)piixide0 at pci0 dev 31 
function 2piixide0: Intel 3400 Serial ATA Controller (rev. 0x05)piixide0: 
bus-master DMA support presentpiixide0: primary channel configured to 
native-PCI modepiixide0: using ioapic0 pin 18 for native-PCI interruptatabus0 
at piixide0 channel 0piixide0: secondary channel configured to native-PCI 
modeatabus1 at piixide0 channel 1vendor 0x8086 product 0x3b30 (SMBus serial 
bus, revision 0x05) at pci0 dev 31 function 3 not configuredpiixide1 at pci0 
dev 31 function 5piixide1: Intel 3400 Serial ATA Controller (rev. 
0x05)piixide1: bus-master DMA support presentpiixide1: primary channel wired to 
native-PCI modepiixide1: using ioapic0 pin 17 for native-PCI interruptatabus2 
at piixide1 channel 0piixide1: secondary channel wired to native-PCI 
modeatabus3 at piixide1 channel 1isa0 at pcib0com0 at isa0 port 0x3f8-0x3ff irq 
4: ns16550a, working fifopckbc0 at isa0 port 0x60-0x64pckbc: cmd word write 
errortimecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 
0timecounter: Timecounter "TSC" frequency 2394074600 Hz quality 3000uhub0 at 
usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1uhub0: 2 
ports with 2 removable, self powereduhub1 at usb1: vendor 0x8086 EHCI root hub, 
class 9/0, rev 2.00/1.00, addr 1uhub1: 2 ports with 2 removable, self 
powereduhub2 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 
2.00/0.00, addr 2uhub2: single transaction translatoruhub3 at uhub0 port 1: 
vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2uhub3: single 
transaction translatoruhub2: 8 ports with 8 removable, self powereduhub3: 6 
ports with 6 removable, self powereduhidev0 at uhub2 port 1 configuration 1 
interface 0uhidev0: ServerEngines SE USB Device, rev 1.10/0.01, addr 3, iclass 
3/1ukbd0 at uhidev0wd0 at atabus0 drive 0: <GB0250EAFYK>wd0: drive supports 
16-sector PIO transfers, LBA48 addressingwd0: 232 GB, 484521 cyl, 16 head, 63 
sec, 512 bytes/sect x 488397168 sectorswskbd0 at ukbd0 mux 1wskbd0: connecting 
to wsdisplay0uhidev1 at uhub2 port 1 configuration 1 interface 1uhidev1: 
ServerEngines SE USB Device, rev 1.10/0.01, addr 3, iclass 3/1ums0 at uhidev1: 
8 buttons and Z dirwsmouse0 at ums0 mux 0wd0: 32-bit data portwd0: drive 
supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)wd0(piixide0:0:0): 
using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)ipmi0: version 2.0 
interface KCS iobase 0xca2/2 spacing 1atapibus0 at atabus2: 2 targetscd0 at 
atapibus0 drive 0: <hp       DVDROM DH40N, K6AB1BD2528, IS00> cdrom 
removablecd0: 32-bit data portcd0: drive supports PIO mode 4, DMA mode 2, 
Ultra-DMA mode 5 (Ultra/100)cd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 
5 (Ultra/100) (using DMA)Kernelized RAIDframe activatedpad0: outputs: 44100Hz, 
16-bit, stereoaudio0 at pad0: half duplex, playback, captureboot device: 
wd0root on wd0a dumps on wd0broot file system type: ffswsdisplay0: screen 1 
added (80x25, vt100 emulation)wsdisplay0: screen 2 added (80x25, vt100 
emulation)wsdisplay0: screen 3 added (80x25, vt100 emulation)wsdisplay0: screen 
4 added (80x25, vt100 emulation)

----------------------------------------
> Date: Thu, 21 Jul 2011 20:57:03 +0100
> From: tron%zhadum.org.uk@localhost
> To: exilkoelner%hotmail.com@localhost
> CC: netbsd-users%netbsd.org@localhost
> Subject: Re: NetBSD on HP ML110 G6
>
> On Thu, Jul 21, 2011 at 08:09:57PM +0200, Tom Taylor wrote:
> > Hi Matthias, the more recent branch doesn't fix the problem. In my
> > dmesg I can see something like "Unsupported PCI express version",
> > could this be part of the problem?
>
> I'm sorry but I don't know that.
>
> Can you please send the output of the "dmesg" command to the list?
>
> Kind regards
>
> --
> Matthias Scheler http://zhadum.org.uk/
Follow-Ups:
- Re: NetBSD on HP ML110 G6
  - From: Matthias Scheler
References:
- NetBSD on HP ML110 G6
  - From: Tom Taylor
- Re: NetBSD on HP ML110 G6
  - From: Matthias Scheler
- RE: NetBSD on HP ML110 G6
  - From: Tom Taylor
- Re: NetBSD on HP ML110 G6
  - From: Matthias Scheler
Prev by Date: Re: Re (2): NetBSD documentation-hackathon from August 10th to August 14th
Next by Date: Re: NetBSD on HP ML110 G6
Previous by Thread: Re: NetBSD on HP ML110 G6
Next by Thread: Re: NetBSD on HP ML110 G6
Indexes:
Home | Main Index | Thread Index | Old Index