How to install the i386 boot when upgrading from 5.1 to 6.0?

[Ji YongGang <jungleji%gmail.com@localhost>]

Hi all,

Recently I want to upgrade my thinkpad x60 from netbsd/i386 5.1 to 6.0
branch, so I cvs update the /usr/src

$ cvs up -dP -r netbsd-6

and following the instruction:

http://www.netbsd.org/docs/guide/en/chap-updating.html#updating-summary

After I build and replace the GENERIC kernel with new one, the
reboot step cannot succeeded.

The screen only display the first line message and reboot immediately.

I knew the new netbsd-6 kernel using modules under i386, so I try the
MONOLITHIC kernel, but it failed boot, too.

Then I copy the fresh 6.0 destdir.i386/usr/mdec/boot to /boot,
destdir.i36/stand/i386/6.0 to /stand/i386. Boot the system, this time
the screen show more one line:

Loading /stand/i386/6.0/modules/ffs/ffs.kmod

and reboot again.

Add -vx boot options, no verbose and debug messages appeared.

I also try the same upgrading procedure on another PC box, it has
netbsd/i386 5.1 installed, and boot new kernel encounter the same reboot
problem.

The bootloader on these systems is GRUB 0.97. 

Did I miss some important things with new version boot before
launching the new kernel?

The attachment is the dmesg output from my x60.

TIA,
Jungle

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1.0_PATCH (GENERIC) #0: Wed Dec  1 13:41:15 HKT 2010
        jungle@x60:/usr/obj/sys/arch/i386/compile/GENERIC
total memory = 1014 MB
avail memory = 985 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 1706A7C (ThinkPad X60)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1662MHz, id 0x6e8
cpu0: Enhanced SpeedStep (1004 mV) 1000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1667 1500 1333 1167 1000
cpu1 at mainbus0 apid 1: Intel 686-class, 1662MHz, id 0x6e8
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <LENOVO,TP-7B   ,00002140>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (FPU, PNP0C04): io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM3780) (aux port): irq 12
TPM (ATM1200) at acpi0 not configured
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: battery info: SANYO, LION, 42T4632 11126
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
thinkpad0: using CMOS at \UCMS
thinkpad0: using EC at acpiecdt0
acpitz0 at acpi0 (THM0): critical 127.0C, passive cooling
acpitz1 at acpi0 (THM1): critical 97.0C passive 42.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x27a0 (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x27a2 (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x27a6 (miscellaneous display, revision 0x03) at pci0 dev 
2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17
azalia0: host: 0x8086/0x27d8 (rev. 2), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x02)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci1 dev 0 function 0: Intel i82573L Gigabit Ethernet, rev. 0
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address 00:16:d3:2c:f3:13
makphy0 at wm0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x27d2 (rev. 0x02)
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4227 (rev. 0x02)
wpi0: interrupting at ioapic0 pin 17
wpi0: RoW, address 00:18:de:64:7f:28
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x27d4 (rev. 0x02)
ppb2: disabling notification events
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x27d6 (rev. 0x02)
pci4 at ppb3 bus 12
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 17
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 19
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xe2)
pci5 at ppb4 bus 21
pci5: i/o space enabled
cbb0 at pci5 dev 0 function 0: vendor 0x1180 product 0x0476 (rev. 0xb4)
cbb0: can't map socket base address 0xe4300000
cbb0: can't map socket base address 0xc0a534d6: io mode
fwohci0 at pci5 dev 0 function 1: vendor 0x1180 product 0x0552 (rev. 0x09)
fwohci0: can't map OHCI register space
sdhc0 at pci5 dev 0 function 2: vendor 0x1180 product 0x0822 (rev. 0x18)
sdhc0: interrupting at ioapic0 pin 18
sdhc0: couldn't map register
cbb0: cacheline 0x0 lattimer 0x10
cbb0: bhlc 0x821000
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 22
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x27c5
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: AHCI revision 1.1, 4 ports, 32 command slots, features 0xc710e000
atabus1 at ahcisata0 channel 0
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1662604600 Hz quality 3000
azalia0: codec[0]: Analog Devices AD1981HD (rev. 2.0), HDA rev. 1.0
azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0), HDA rev. 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, playback, capture, independent
acpiacad0: AC adapter offline.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0: <HTS541060G9SA00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
ugen0 at uhub3 port 2
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)