Re: Is ldX @ sdmmc supposed to be r/o only?

[Chavdar Ivanov <ci4ic4%gmail.com@localhost>]

On 17 July 2012 14:53, Martin S. Weber <Ephaeton%gmx.net@localhost> wrote:
> NetBSD 6.0_BETA2 (GENERIC) #1: Sat Jul 14 19:25:57 EDT 2012
> LENOVO 7658CTO (ThinkPad T61)
> mainbus0 (root)
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf3)
> pci6 at ppb5 bus 21
> pci6: i/o space, memory space enabled
> sdhc0 at pci6 dev 0 function 2: vendor 0x1180 product 0x0822 (rev. 0x21)
> sdhc0: interrupting at ioapic0 pin 18
> sdmmc0 at sdhc0
>
> (...)
>
> ld0 at sdmmc0: <28362>
> ld0: 1923 MB, 976 cyl, 64 head, 63 sec, 512 bytes/sect x 3938304 sectors
> ld0: 4-bit width, bus clock 25.000 MHz
> sdmmc0: write-protected
> ld0a: error writing fsbn 643 of 643-706 (ld0 bn 706; cn 0 tn 22 sn 2)
> sdmmc0: write-protected
> ld0a: error writing fsbn 643 of 643-706 (ld0 bn 706; cn 0 tn 22 sn 2)
> sdmmc0: write-protected
> ld0a: error writing fsbn 643 of 643-706 (ld0 bn 706; cn 0 tn 22 sn 2)
> sdmmc0: write-protected
> ld0a: error writing fsbn 643 of 643-706 (ld0 bn 706; cn 0 tn 22 sn 2)
> sdmmc0: write-protected
> ld0a: error writing fsbn 643 of 643-706 (ld0 bn 706; cn 0 tn 22 sn 2)
> sdmmc0: write-protected
> ld0a: error writing fsbn 1 of 1-128 (ld0 bn 64; cn 0 tn 2 sn 0)
> sdmmc0: write-protected
> ld0a: error writing fsbn 242 of 242-369 (ld0 bn 305; cn 0 tn 9 sn 17)
> sdmmc0: write-protected
> ld0a: error writing fsbn 643 of 643-706 (ld0 bn 706; cn 0 tn 22 sn 2)
> sdmmc0: write-protected
> ld0a: error writing fsbn 1 of 1-128 (ld0 bn 64; cn 0 tn 2 sn 0)
> sdmmc0: write-protected
> ld0a: error writing fsbn 242 of 242-369 (ld0 bn 305; cn 0 tn 9 sn 17)
>
> It's mounted r/w at least.. The medium has been used to be written on
> right before (camera), I can also mount r/w via a external usb cardreader
> without fiddling with the hardware, so that's not it..
>
> So .. $SUBJECT ?


I've got T61p wih the same card reader, although I run and64 -current
on it. It probably depends on the card used - I have several cards
which read/write without any problems using a USB card reader, but
fail under load when connected to the Ricoh device. At the same time I
have several other cards, which work fine on both. That is case no
matter which OS I am on - I have NetBSD-current, W7-64, W8-64 and
Solaris 11 installed on this machine, the behavior is the same.

Chavdar

>
> TIA,
> -Martin
>



-- 
----