Konrad,
It's easy enough to try a current kernel temporarily. The ftp site
nyftp.netbsd.org contains current images that are built every night. You
didn't mention your platform, but if it's i386, then this kernel will work:
ftp://nyftp.netbsd.org/pub/NetBSD-daily/HEAD/201208280330Z/i386/binary/kernel/netbsd-MONOLITHIC.gz
Place this kernel in the root of your filesystem and interrupt the boot
loader, then issue the command:
boot netbsd-MONOLITHIC.gz
That should tell you whether current supports your second NIC or not.
Jason M.
On 08/28/2012 09:27 AM, Konrad Neuwirth wrote:
Hello,
we're configuring NetBSD on a Supermicro X9SCM-F mainboard, that supposedly
contains two NICs.
Alas, NetBSD 5.1 does only recognize on of them; for the other, all I see
in dmesg is:
| hci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1c2d (rev. 0x05)
| ehci0: interrupting at ioapic0 pin 16
| ehci0: EHCI version 1.0
| usb0 at ehci0: USB revision 2.0
| ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x1c10 (rev. 0xb5)
| ppb1: unsupported PCI Express version
| pci2 at ppb1 bus 2
| pci2: i/o space, memory space enabled, rd/line, wr/inv ok
| ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x1c18 (rev. 0xb5)
| ppb2: unsupported PCI Express version
| pci3 at ppb2 bus 3
| pci3: i/o space, memory space enabled, rd/line, wr/inv ok
Is there any chance that this would be running under -current, or are there
things I could do to make it run? I'd rather not insert another pci card
into the machine, but require two seperate NICs.
Thank you,
Konrad