NetBSD-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
success story -- SUN storage bay with RAIDframe
Hi there,
just to let you know that NetBSD 6.0.1/amd64 and RAIDframe runs great so
far on a SUN Storage 7110 disk array system. It has been up for 31 days
now and it should go into production in next weeks. The original system
on this machine was "Fishworks" or something like "Sun Unified Storage
System" but only the Oracle support has the USB stick to reinstall it
from scratch and we don't have any contract for this machine, so I
decided to run NetBSD on it. Here's the dmesg (yes, lots of disks,
obiously, as it's a storage bay). Note that all the network interfaces
are recognized by the kernel, even the supplementary card. This is some
kind professional hardware and I am really glad to observe that NetBSD
works very well on it. Best regards and many thanks to NetBSD as we
finally managed to give a new birth to this machine without the help of
the hardware and software manufacturer.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.0.1 (GENERIC)
total memory = 8191 MB
avail memory = 7938 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Sun Microsystems Sun Fire X4240 ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Six-Core AMD Opteron(tm) Processor 2427, id
0x100f80
cpu1 at mainbus0 apid 1: Six-Core AMD Opteron(tm) Processor 2427, id
0x100f80
cpu2 at mainbus0 apid 2: Six-Core AMD Opteron(tm) Processor 2427, id
0x100f80
cpu3 at mainbus0 apid 3: Six-Core AMD Opteron(tm) Processor 2427, id
0x100f80
cpu4 at mainbus0 apid 4: Six-Core AMD Opteron(tm) Processor 2427, id
0x100f80
cpu5 at mainbus0 apid 5: Six-Core AMD Opteron(tm) Processor 2427, id
0x100f80
ioapic0 at mainbus0 apid 6: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 7: pa 0xddfff000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <SUN ,X4x40 ,00000068>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 25000000 Hz quality 2000
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
IRMS (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
BMC (IPI0001) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
IRMS (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x0369 (RAM memory, revision 0xa2) at pci0 dev 0
function 0 not configured
pcib0 at pci0 dev 1 function 0: vendor 0x10de product 0x0364 (rev. 0xa3)
nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x0368 (rev. 0xa3)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x036c (rev. 0xa1)
LUB0: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x036d (rev. 0xa2)
LUB2: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
ehci0: companion controller, 10 ports each: ohci0
usb1 at ehci0: USB revision 2.0
viaide0 at pci0 dev 5 function 0: NVIDIA MCP55 Serial ATA Controller
(rev. 0xa3)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
LSA0: Picked IRQ 22 with weight 0
viaide0: using ioapic0 pin 22 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 5 function 1: NVIDIA MCP55 Serial ATA Controller
(rev. 0xa3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
LSA1: Picked IRQ 23 with weight 0
viaide1: using ioapic0 pin 23 for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 5 function 2: NVIDIA MCP55 Serial ATA Controller
(rev. 0xa3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
LSA2: Picked IRQ 20 with weight 1
viaide2: using ioapic0 pin 20 for native-PCI interrupt
atabus4 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus5 at viaide2 channel 1
ppb0 at pci0 dev 6 function 0: vendor 0x10de product 0x0370 (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: vendor 0x1a03 product 0x2000 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
nfe0 at pci0 dev 8 function 0: vendor 0x10de product 0x0373 (rev. 0xa3)
LMAC: Picked IRQ 21 with weight 1
nfe0: interrupting at ioapic0 pin 21
nfe0: Ethernet address 00:21:28:6f:e9:e6
ukphy0 at nfe0 phy 2: OUI 0x000ac2, model 0x000b, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
nfe1 at pci0 dev 9 function 0: vendor 0x10de product 0x0373 (rev. 0xa3)
LMAD: Picked IRQ 22 with weight 1
nfe1: interrupting at ioapic0 pin 22
nfe1: Ethernet address 00:21:28:6f:e9:e7
ukphy1 at nfe1 phy 3: OUI 0x000ac2, model 0x000b, rev. 3
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb1 at pci0 dev 10 function 0: vendor 0x10de product 0x0377 (rev. 0xa3)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 14 function 0: vendor 0x10de product 0x0376 (rev. 0xa3)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci3 dev 0 function 0: vendor 0x111d product 0x8018 (rev. 0x0e)
ppb3: PCI Express 1.0 <Upstream Port of PCI-E Switch>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci4 dev 2 function 0: vendor 0x111d product 0x8018 (rev. 0x0e)
ppb4: PCI Express 1.0 <Downstream Port of PCI-E Switch>
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci5 dev 0 function 0: Intel PRO/1000 PT Quad Port Server Adapter
(rev. 0x06)
LNEB: Picked IRQ 16 with weight 0
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:15:17:d9:d1:29
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
wm1 at pci5 dev 0 function 1: Intel PRO/1000 PT Quad Port Server Adapter
(rev. 0x06)
LNEA: Picked IRQ 17 with weight 0
wm1: interrupting at ioapic0 pin 17
wm1: PCI-Express bus
wm1: 65536 word (16 address bits) SPI EEPROM
wm1: Ethernet address 00:15:17:d9:d1:28
igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb5 at pci4 dev 4 function 0: vendor 0x111d product 0x8018 (rev. 0x0e)
ppb5: PCI Express 1.0 <Downstream Port of PCI-E Switch>
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
wm2 at pci6 dev 0 function 0: Intel PRO/1000 PT Quad Port Server Adapter
(rev. 0x06)
LNED: Picked IRQ 18 with weight 0
wm2: interrupting at ioapic0 pin 18
wm2: PCI-Express bus
wm2: 65536 word (16 address bits) SPI EEPROM
wm2: Ethernet address 00:15:17:d9:d1:2b
igphy2 at wm2 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
wm3 at pci6 dev 0 function 1: Intel PRO/1000 PT Quad Port Server Adapter
(rev. 0x06)
LNEC: Picked IRQ 19 with weight 0
wm3: interrupting at ioapic0 pin 19
wm3: PCI-Express bus
wm3: 65536 word (16 address bits) SPI EEPROM
wm3: Ethernet address 00:15:17:d9:d1:2a
igphy3 at wm3 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb6 at pci0 dev 15 function 0: vendor 0x10de product 0x0375 (rev. 0xa3)
ppb6: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
mpt0 at pci7 dev 0 function 0: vendor 0x1000 product 0x0058 (rev. 0x04)
mpt0: interrupting at ioapic0 pin 16
mpt0: Phy 0: Link Rate 3.0 Gbps
mpt0: Phy 1: Link Rate 3.0 Gbps
mpt0: Unknown async event: 0x1b
mpt0: Phy 0: Link Rate 3.0 Gbps
mpt0: Phy 1: Link Rate 3.0 Gbps
mpt0: Phy 2: Link Rate 3.0 Gbps
mpt0: Phy 3: Link Rate 3.0 Gbps
mpt0: Phy 4: Link Rate 3.0 Gbps
mpt0: Phy 5: Link Rate 3.0 Gbps
mpt0: Phy 6: Link Rate 3.0 Gbps
mpt0: Phy 7: Link Rate 3.0 Gbps
mpt0: Phy 8: Link Rate 3.0 Gbps
mpt0: Phy 9: Link Rate 3.0 Gbps
mpt0: Phy 10: Link Rate 3.0 Gbps
mpt0: Phy 11: Link Rate 3.0 Gbps
mpt0: Phy 12: Link Rate 3.0 Gbps
mpt0: Phy 13: Link Rate 3.0 Gbps
mpt0: Phy 14: Link Rate 3.0 Gbps
mpt0: Phy 15: Link Rate 3.0 Gbps
mpt0: Phy 16: Link Rate 3.0 Gbps
mpt0: Phy 17: Link Rate 3.0 Gbps
mpt0: Phy 18: Link Rate 3.0 Gbps
mpt0: Phy 28: Link Rate 3.0 Gbps
mpt0: Phy 2: Link Rate 3.0 Gbps
mpt0: Phy 19: Link Rate 3.0 Gbps
mpt0: Phy 3: Link Rate 3.0 Gbps
mpt0: Phy 20: Link Rate 3.0 Gbps
mpt0: Phy 4: Link Rate 3.0 Gbps
mpt0: Phy 21: Link Rate 3.0 Gbps
mpt0: Phy 5: Link Rate 3.0 Gbps
mpt0: Phy 22: Link Rate 3.0 Gbps
mpt0: Phy 6: Link Rate 3.0 Gbps
mpt0: Phy 23: Link Rate 3.0 Gbps
mpt0: Phy 7: Link Rate 3.0 Gbps
scsibus0 at mpt0: 112 targets, 8 luns per target
pchb0 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb1 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb2 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
pchb3 at pci0 dev 24 function 3: vendor 0x1022 product 0x1203 (rev. 0x00)
amdtemp0 at pchb3: AMD CPU Temperature Sensors (Family10h)
pchb4 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbc: cmd word write error
pci8 at mainbus0 bus 128
pci8: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x0369 (RAM memory, revision 0xa2) at pci8 dev 0
function 0 not configured
vendor 0x10de product 0x0361 (RAM memory, revision 0xa3) at pci8 dev 1
function 0 not configured
nfsmbc1 at pci8 dev 1 function 1: vendor 0x10de product 0x0368 (rev. 0xa3)
nfsmb2 at nfsmbc1 SMBus 1
iic2 at nfsmb2: I2C bus
nfsmb3 at nfsmbc1 SMBus 2
iic3 at nfsmb3: I2C bus
viaide3 at pci8 dev 5 function 0: NVIDIA MCP55 Serial ATA Controller
(rev. 0xa3)
viaide3: bus-master DMA support present
viaide3: primary channel wired to native-PCI mode
ISI0: Picked IRQ 44 with weight 0
viaide3: using ioapic1 pin 20 for native-PCI interrupt
atabus6 at viaide3 channel 0
viaide3: secondary channel wired to native-PCI mode
atabus7 at viaide3 channel 1
viaide4 at pci8 dev 5 function 1: NVIDIA MCP55 Serial ATA Controller
(rev. 0xa3)
viaide4: bus-master DMA support present
viaide4: primary channel wired to native-PCI mode
ISI1: Picked IRQ 45 with weight 0
viaide4: using ioapic1 pin 21 for native-PCI interrupt
atabus8 at viaide4 channel 0
viaide4: secondary channel wired to native-PCI mode
atabus9 at viaide4 channel 1
viaide5 at pci8 dev 5 function 2: NVIDIA MCP55 Serial ATA Controller
(rev. 0xa3)
viaide5: bus-master DMA support present
viaide5: primary channel wired to native-PCI mode
ISI2: Picked IRQ 46 with weight 0
viaide5: using ioapic1 pin 22 for native-PCI interrupt
atabus10 at viaide5 channel 0
viaide5: secondary channel wired to native-PCI mode
atabus11 at viaide5 channel 1
nfe2 at pci8 dev 8 function 0: vendor 0x10de product 0x0373 (rev. 0xa3)
IIM0: Picked IRQ 47 with weight 0
nfe2: interrupting at ioapic1 pin 23
nfe2: Ethernet address 00:21:28:6f:e9:e8
ukphy2 at nfe2 phy 2: OUI 0x000ac2, model 0x000b, rev. 3
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
nfe3 at pci8 dev 9 function 0: vendor 0x10de product 0x0373 (rev. 0xa3)
IIM1: Picked IRQ 44 with weight 1
nfe3: interrupting at ioapic1 pin 20
nfe3: Ethernet address 00:21:28:6f:e9:e9
ukphy3 at nfe3 phy 3: OUI 0x000ac2, model 0x000b, rev. 3
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb7 at pci8 dev 11 function 0: vendor 0x10de product 0x0378 (rev. 0xa3)
ppb7: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci9 at ppb7 bus 129
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci8 dev 14 function 0: vendor 0x10de product 0x0376 (rev. 0xa3)
ppb8: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci10 at ppb8 bus 130
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci8 dev 15 function 0: vendor 0x10de product 0x0377 (rev. 0xa3)
ppb9: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci11 at ppb9 bus 131
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 5 us, pow 14300 mW, 2200 MHz
acpicpu0: P1: FFH, lat 5 us, pow 10605 mW, 1700 MHz
acpicpu0: P2: FFH, lat 5 us, pow 8507 mW, 1300 MHz
acpicpu0: P3: FFH, lat 5 us, pow 6900 mW, 1000 MHz
acpicpu0: P4: FFH, lat 5 us, pow 4810 mW, 800 MHz
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2200196840 Hz quality 3000
scsibus0: waiting 2 seconds for devices to settle...
uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST914603SSUN146G, 0868> disk fixed
sd0: 136 GB, 14089 cyl, 24 head, 848 sec, 512 bytes/sect x 286739329 sectors
sd0: async, 8-bit transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <HP, DH0072FAQRD, HPDH> disk fixed
sd1: 70007 MB, 60605 cyl, 2 head, 1182 sec, 512 bytes/sect x 143374738
sectors
sd1: async, 8-bit transfers, tagged queueing
sd2 at scsibus0 target 2 lun 0: <HP, DH072BAAKN, HPD3> disk fixed
sd2: 70007 MB, 48184 cyl, 4 head, 743 sec, 512 bytes/sect x 143374738
sectors
sd2: async, 8-bit transfers, tagged queueing
sd3 at scsibus0 target 3 lun 0: <HP, DH072BAAKN, HPD3> disk fixed
sd3: 70007 MB, 48184 cyl, 4 head, 743 sec, 512 bytes/sect x 143374738
sectors
sd3: async, 8-bit transfers, tagged queueing
sd4 at scsibus0 target 4 lun 0: <HP, DH0072BALWL, HPD3> disk fixed
sd4: 70007 MB, 60605 cyl, 2 head, 1182 sec, 512 bytes/sect x 143374738
sectors
sd4: async, 8-bit transfers, tagged queueing
sd5 at scsibus0 target 5 lun 0: <HP, DH0072FAQRD, HPDH> disk fixed
sd5: 70007 MB, 60605 cyl, 2 head, 1182 sec, 512 bytes/sect x 143374738
sectors
sd5: async, 8-bit transfers, tagged queueing
sd6 at scsibus0 target 6 lun 0: <HP, DH0072FAQRD, HPDH> disk fixed
sd6: 70007 MB, 60605 cyl, 2 head, 1182 sec, 512 bytes/sect x 143374738
sectors
sd6: async, 8-bit transfers, tagged queueing
sd7 at scsibus0 target 7 lun 0: <HP, DH0072FAQRD, HPDH> disk fixed
sd7: 70007 MB, 60605 cyl, 2 head, 1182 sec, 512 bytes/sect x 143374738
sectors
sd7: async, 8-bit transfers, tagged queueing
sd8 at scsibus0 target 8 lun 0: <HP, DH0072BALWL, HPD3> disk fixed
sd8: 70007 MB, 60605 cyl, 2 head, 1182 sec, 512 bytes/sect x 143374738
sectors
sd8: async, 8-bit transfers, tagged queueing
sd9 at scsibus0 target 9 lun 0: <HP, DH0072FAQRD, HPDH> disk fixed
sd9: 70007 MB, 60605 cyl, 2 head, 1182 sec, 512 bytes/sect x 143374738
sectors
sd9: async, 8-bit transfers, tagged queueing
sd10 at scsibus0 target 10 lun 0: <HP, DH0072FAQRD, HPDC> disk fixed
sd10: 70007 MB, 60605 cyl, 2 head, 1182 sec, 512 bytes/sect x 143374738
sectors
sd10: async, 8-bit transfers, tagged queueing
sd11 at scsibus0 target 11 lun 0: <HP, DH0072BALWL, HPD3> disk fixed
sd11: 70007 MB, 60605 cyl, 2 head, 1182 sec, 512 bytes/sect x 143374738
sectors
sd11: async, 8-bit transfers, tagged queueing
sd12 at scsibus0 target 12 lun 0: <HITACHI, H101414SCSUN146G, SA25> disk
fixed
sd12: 136 GB, 14089 cyl, 24 head, 848 sec, 512 bytes/sect x 286739329
sectors
sd12: async, 8-bit transfers, tagged queueing
sd13 at scsibus0 target 13 lun 0: <SEAGATE, ST914602SSUN146G, 0603> disk
fixed
sd13: 136 GB, 14089 cyl, 24 head, 848 sec, 512 bytes/sect x 286739329
sectors
sd13: async, 8-bit transfers, tagged queueing
sd14 at scsibus0 target 14 lun 0: <HITACHI, H101414SCSUN146G, SA25> disk
fixed
sd14: 136 GB, 14089 cyl, 24 head, 848 sec, 512 bytes/sect x 286739329
sectors
sd14: async, 8-bit transfers, tagged queueing
sd15 at scsibus0 target 15 lun 0: <SEAGATE, ST914602SSUN146G, 0603> disk
fixed
sd15: 136 GB, 14089 cyl, 24 head, 848 sec, 512 bytes/sect x 286739329
sectors
sd15: async, 8-bit transfers, tagged queueing
ses0 at scsibus0 target 16 lun 0: <LSILOGIC, SASX28 A.0, 5021> enclosure
services fixed
ses0: SCSI-3 SES Device
uhidev0 at uhub0 port 5 configuration 1 interface 0
uhidev0: American Megatrends Inc. Virtual Keyboard and Mouse, rev
1.10/1.00, addr 2, iclass 3/1
ukbd0 at uhidev0
uhub2 at uhub1 port 6: vendor 0x04b4 product 0x6560, class 9/0, rev
2.00/0.0b, addr 2
uhub2: multiple transaction translators
uhub2: 4 ports with 4 removable, self powered
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub0 port 5 configuration 1 interface 1
uhidev1: American Megatrends Inc. Virtual Keyboard and Mouse, rev
1.10/1.00, addr 2, iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
raid0: Component /dev/sd1a being configured at col: 0
Column: 0 Num Columns: 5
Version: 2 Serial Number: 1364478461 Mod Counter: 36
Clean: No Status: 0
/dev/sd1a is not clean!
raid0: Component /dev/sd2a being configured at col: 1
Column: 1 Num Columns: 5
Version: 2 Serial Number: 1364478461 Mod Counter: 36
Clean: No Status: 0
/dev/sd2a is not clean!
raid0: Component /dev/sd3a being configured at col: 2
Column: 2 Num Columns: 5
Version: 2 Serial Number: 1364478461 Mod Counter: 36
Clean: No Status: 0
/dev/sd3a is not clean!
raid0: Component /dev/sd4a being configured at col: 3
Column: 3 Num Columns: 5
Version: 2 Serial Number: 1364478461 Mod Counter: 36
Clean: No Status: 0
/dev/sd4a is not clean!
raid0: Component /dev/sd5a being configured at col: 4
Column: 4 Num Columns: 5
Version: 2 Serial Number: 1364478461 Mod Counter: 36
Clean: No Status: 0
/dev/sd5a is not clean!
raid0: RAID Level 5
raid0: Components: /dev/sd1a /dev/sd2a /dev/sd3a /dev/sd4a /dev/sd5a
raid0: Total Sectors: 573498368 (280028 MB)
raid1: Component /dev/sd6a being configured at col: 0
Column: 0 Num Columns: 5
Version: 2 Serial Number: 1364478462 Mod Counter: 12
Clean: No Status: 0
/dev/sd6a is not clean!
raid1: Component /dev/sd7a being configured at col: 1
Column: 1 Num Columns: 5
Version: 2 Serial Number: 1364478462 Mod Counter: 12
Clean: No Status: 0
/dev/sd7a is not clean!
raid1: Component /dev/sd8a being configured at col: 2
Column: 2 Num Columns: 5
Version: 2 Serial Number: 1364478462 Mod Counter: 12
Clean: No Status: 0
/dev/sd8a is not clean!
raid1: Component /dev/sd9a being configured at col: 3
Column: 3 Num Columns: 5
Version: 2 Serial Number: 1364478462 Mod Counter: 12
Clean: No Status: 0
/dev/sd9a is not clean!
raid1: Component /dev/sd10a being configured at col: 4
Column: 4 Num Columns: 5
Version: 2 Serial Number: 1364478462 Mod Counter: 12
Clean: No Status: 0
/dev/sd10a is not clean!
raid1: RAID Level 5
raid1: Components: /dev/sd6a /dev/sd7a /dev/sd8a /dev/sd9a /dev/sd10a
raid1: Total Sectors: 573498368 (280028 MB)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Hosed component: /dev/sd13a
raid3: Too many different mod counters!
raid3: Component /dev/sd12a being configured at col: 0
Column: 0 Num Columns: 0
Version: 0 Serial Number: 0 Mod Counter: 0
Clean: No Status: 0
Number of columns do not match for: /dev/sd12a
/dev/sd12a is not clean!
raid3: Ignoring /dev/sd13a
raid3: Component /dev/sd14a being configured at col: 2
Column: 536870912 Num Columns: 1073741824
Version: 0 Serial Number: 0 Mod Counter: 268435456
Clean: Yes Status: -1593061301
/dev/sd14a has a different modification count: 0 268435456
Row out of alignment for: /dev/sd14a
Column out of alignment for: /dev/sd14a
Number of columns do not match for: /dev/sd14a
raid3: Component /dev/sd15a being configured at col: 3
Column: 0 Num Columns: 0
Version: 0 Serial Number: 0 Mod Counter: 0
Clean: No Status: 0
Column out of alignment for: /dev/sd15a
Number of columns do not match for: /dev/sd15a
/dev/sd15a is not clean!
raid3: There were fatal errors
raid3: Fatal errors being ignored.
raid3: RAID Level 5
raid3: Components: /dev/sd12a /dev/sd13a /dev/sd14a /dev/sd15a
raid3: Total Sectors: 860217600 (420028 MB)
raid2: Component /dev/raid0a being configured at col: 0
Column: 0 Num Columns: 0
Version: 0 Serial Number: 0 Mod Counter: 0
Clean: No Status: 0
Number of columns do not match for: /dev/raid0a
/dev/raid0a is not clean!
raid2: Component /dev/raid1a being configured at col: 1
Column: 0 Num Columns: 0
Version: 0 Serial Number: 0 Mod Counter: 0
Clean: No Status: 0
Column out of alignment for: /dev/raid1a
Number of columns do not match for: /dev/raid1a
/dev/raid1a is not clean!
raid2: There were fatal errors
raid2: Fatal errors being ignored.
raid2: RAID Level 0
raid2: Components: /dev/raid0a /dev/raid1a
raid2: Total Sectors: 1146996480 (560056 MB)
Never mind the parity errors which only occurred the raid initialization
processes or during previous attempts, everything is fine now (got 4
raid arrays, all clean). raid2 is a stripping on the two previous raid
arrays, so it's a RAID 50.
pierre-philipp braun
Home |
Main Index |
Thread Index |
Old Index