Re: ThinkPad not going properly to sleep

[Riccardo Mottola <riccardo.mottola%libero.it@localhost>]

Hi Christos,

christos%astron.com@localhost (Christos Zoulas) wrote:
> Do you have the latest BIOS?
No, I had not. Lenovo's site is confusing and there were differnt BIOS 
revision depending if you installed with floppy, from windows or others. 
Confusing!
I just updated (not an easy task if you don't have Windows, don't have a 
floppy and your battery is dead... ).

Anyway, the update does not fix the problem: when the computer goes to 
sleep the computer backlight remains on (although the screen is black).
There are however less errors in the dmesg, which is positive. I see 
only two menacious logs:
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] 
(20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] 
(20131218/hwxface-646)

What do you think?

Riccardo


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_RC3 (GENERIC.201508110747Z)
total memory = 767 MB
avail memory = 737 MB
kern.module.path=/stand/i386/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
IBM 236688G (Not Available)
mainbus0 (root)
ACPI: RSDP 0xf7010 000024 (v02 IBM   )
ACPI: XSDT 0x2ff731cd 00004C (v01 IBM    TP-1I    00002100  LTP 00000000)
ACPI: FACP 0x2ff73300 000081 (v01 IBM    TP-1I    00002100 IBM 00000001)
ACPI: DSDT 0x2ff733e7 00AAD5 (v01 IBM    TP-1I    00002100 MSFT 0100000D)
ACPI: FACS 0x2ff7f000 000040
ACPI: SSDT 0x2ff733b4 000033 (v01 IBM    TP-1I    00002100 MSFT 0100000D)
ACPI: ECDT 0x2ff7debc 000052 (v01 IBM    TP-1I    00002100 IBM 00000001)
ACPI: TCPA 0x2ff7df0e 000032 (v01 IBM    TP-1I    00002100 PTL 00000001)
ACPI: BOOT 0x2ff7dfd8 000028 (v01 IBM    TP-1I    00002100  LTP 00000001)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz, id 0xf27
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <IBM   ,TP-1I   ,00002100>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11
LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 255
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 11
LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
LNKA: ACPI: Found matching pin for 2.0.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 2.0.INTB at func 1: 11
LNKE: ACPI: Found matching pin for 2.8.INTA at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
FPU (PNP0C04) at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM3780) (aux port): irq 12
UART (PNP0501) at acpi0 not configured
LPT (PNP0400) at acpi0 not configured
FIR (IBM0071) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0110): ACPI Display Output Device
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI0, 0x0210): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0110 (acpiout0): LCD Panel, head 0
acpivga0:   0x0100 (acpiout1): Ext. Monitor, head 0
acpivga0:   0x0200 (acpiout2): TV, head 0
acpivga0:   0x0210 (acpiout3): Unknown Output Device, head 0
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 92.0 C, passive 86.5 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] 
(20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] 
(20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x1a30 (rev. 0x04)
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x1a31 (rev. 0x04)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x4c57 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2482 (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2484 (rev. 0x02)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x2487 (rev. 0x02)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x42)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: vendor 0x104c product 0xac55 (rev. 0x01)
cbb1 at pci2 dev 0 function 1: vendor 0x104c product 0xac55 (rev. 0x01)
fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller (rev. 
0x42)
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:09:6b:30:89:cb
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: cacheline 0x8 lattimer 0x40
cbb0: bhlc 0x824008
cbb0: interrupting at irq 11
cardslot0 at cbb0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
cbb1: cacheline 0x8 lattimer 0x40
cbb1: bhlc 0x824008
cbb1: interrupting at irq 11
cardslot1 at cbb1
cardbus1 at cardslot1: bus 6
pcmcia1 at cardslot1
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x248c (rev. 
0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: SpeedStep enabled
gpio0 at ichlpcib0: 64 pins
piixide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) 
(rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2483 (rev. 0x02)
ichsmb0: interrupting at irq 11
iic0 at ichsmb0: I2C bus
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices 
Phat Stereo
auich0: ac97: ext id 0x1<VRA>
vendor 0x8086 product 0x2486 (modem communications, revision 0x02) at 
pci0 dev 31 function 6 not configured
isa0 at ichlpcib0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 47252 Hz, will use 48000 Hz
audio0 at auich0: full duplex, playback, capture, mmap, independent
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Logitech USB Laser Mouse, rev 2.00/31.00, addr 2, iclass 3/1
ums0 at uhidev0: 8 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0
wd0: <TOSHIBA MK4019GAX>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using 
DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <DW-28E, , 2.1A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)