NetBSD-Users archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: wireless WPA disconnection issues



Hi,

From: Riccardo Mottola <riccardo.mottola%libero.it@localhost>, Date: Mon, 7 Mar 2016 18:32:00 +0100

> Hi,
> 
> I have an issue when trying to remain connected to a WPA network.
> I use wpa_supplicant and dhcpcd (I suppose that's the only
> way?). Connection happens fine, but after a certain while.. sometimes
> minutes, sometimes hours, I loose connection.
> 
> I need to kill wpa_supplicant and dhpcd and relaunch them and
> everything works again.
> 
> I noticed that every time I have an issue, I see in my dmesg:
> 
> iwi0: unknown authentication state 1
> 
> 
> Dmesg says about my iwi:
> 
> iwi0 at pci1 dev 2 function 0: vendor 0x8086 product 0x4220
> (rev. 0x05)
> iwi0: interrupting at irq 11
> iwi0: 802.11 address 00:0e:35:60:1a:48
> iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> 24Mbps 36Mbps 48Mbps 54Mbps
> 
> Anyone has similar issues? what could be the problem?

I have iwm(4) in my laptop
When it is used with Android smartphone's tethering Wi-Fi access point,
Wi-Fi WPA2-PSK (AES) connection is disconnected with
iwm0: fatal firmware error
error message from kernel.
And only reboot helps me.
Standard Wi-Fi access point does not cause this error.
I have run(4) device and it is alway sane.

Do you have additional message from your device?

And TKIP connection is not stable (or not supported) for my devices.
I decided to use AES always.

> Thanks,
> Riccardo

--
Ryo ONODERA // ryo_on%yk.rim.or.jp@localhost
PGP fingerprint = 82A2 DC91 76E0 A10A 8ABB  FD1B F404 27FA C7D1 15F3


Home | Main Index | Thread Index | Old Index