NetBSD-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: USB img NetBSD-7.0.1-amd64-install.img does not boot
El día Monday, July 04, 2016 a las 08:34:18AM -0400, Gary Duzan escribió:
> In Message <20160704105315.GA1856@c720-r292778-amd64>,
> Matthias Apitz <guru%unixarea.de@localhost>wrote:
>
> =>I wanted to give NetBSD a try on my Acer C720 (aka Chromebook, but
> =>switched to LegacyBoot mode) and fetched the USB image. I wrote it with
> =>dd(1) to the USB key and it is there and even mountable in FreeBSD:
> =>
> => [...]
> =>
> =>but it does not boot:
> =>
> =>Booting from Hard Disk ...
> =>NetBSD MBR boot
> =>Error Disk read error
> =>Booting from Floppy....
> =>Boot failed: could not read the boot disk
> =>
> =>No bootable device.
> =>
> =>What could I have done wrong? Thanks
>
> I see that the C720 has both USB 2.0 and 3.0 ports. If you are
> using the 3.0 port, try the 2.0 port. Unfortunately, NetBSD's USB
> 3.0 support is experimental at best.
On the 3.0 port it is not even seen as a boot device.
I now wagely remember that we have had changes in the FreeBSD boot code
to support the C720, which are now in trunk, but I have patches from
January 2015. I could send these to someone from NetBSD for review and
integration in NetBSD. I have not enough knowledge about NetBSD to do
this by my own, but would be willing to test the results.
matthias
--
Matthias Apitz, ✉ guru%unixarea.de@localhost, ⌂ http://www.unixarea.de/ ☎ +49-176-38902045
"Wer übersieht, dass wir uns den anderen weggenommen haben und sie uns wiederhaben wollen,
kann von den Kämpfen der letzten Tage keinen verstehen. Und kann natürlich auch keinen
dieser Kämpfe bestehen." Hermann Kant in jW 1.10.1989
Home |
Main Index |
Thread Index |
Old Index