NetBSD-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Any support for Intel Dual Band Wireless-AC 3160 in 7?
Hi,
I just recently picked up a Zotac Zbox CI321 nano and was able to install NetBSD 7 on it without too much trouble. The only issue is that booting a GENERIC kernel I’m unable to get the WLAN working; dmesg shows "vendor 0x8086 product 0x08b3 (miscellaneous network, revision 0x83) at pci2 dev 0 function 0 not configured”. A quick google showed that 8086:08b3 is an Intel Dual Band Wireless-AC 3160; and lspci -v shows:
02:00.0 Network controller: Intel Corporation Wireless 3160 (rev 83)
Subsystem: Intel Corporation Dual Band Wireless-AC 3160
Flags: bus master, fast devsel, latency 0, IRQ 3
Memory at f7c00000 (64-bit, non-prefetchable)
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [40] Express Endpoint, MSI 00
Capabilities: [100] #ffff
Capabilities: [ffc] #ffff
Capabilities: [ffc] <chain looped>
I’ve installed all the firmware packages that seem to affect Intel wifi:
pkg_info | grep firmware
iwn-firmware-4.44.1.20 Firmware binary image for the iwn(4) driver
iwi-firmware-2.3nb2 Firmware binary images for iwi(4) driver
ipw-firmware-1.0 Firmware binary images for ipw(4) driver
wpi-firmware2-2.14.4 Firmware binary images for wpi(4) driver
Any ideas? Is this supported in current?
thanks,
Steve
Home |
Main Index |
Thread Index |
Old Index