Re: APU2 routing speed NetBSD

To: Martin Husemann <martin%duskware.de@localhost>
Subject: Re: APU2 routing speed NetBSD
From: 76nemo76%gmx.ch@localhost
Date: Tue, 20 Dec 2016 09:21:59 +0100
Hi Martin,
     Here are the requested info. Since my last test, I have only added the
IPv6 address. The first benchmark was done with IPv4.

Thanks for help

Best regard

Alan

wm0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	capabilities=7ff80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx>
	capabilities=7ff80<TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Rx>
	capabilities=7ff80<TCP6CSUM_Tx,UDP6CSUM_Rx,UDP6CSUM_Tx,TSO6>
	enabled=0
	ec_capabilities=7<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU>
	ec_enabled=0
	address: 00:0d:b9:42:61:9c
	media: Ethernet autoselect (1000baseT full-duplex,master)
	status: active
	inet 172.16.0.10 netmask 0xffff0000 broadcast 172.16.255.255
	inet6 fe80::20d:b9ff:fe42:619c%wm0 prefixlen 64 scopeid 0x1
	inet6 fd4f:bd4e:6d27:0:de0b:f387:afeb:7 prefixlen 64
	inet6 2a02:168:c000:0:de0b:f387:afeb:7 prefixlen 64


wm1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	capabilities=7ff80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx>
	capabilities=7ff80<TCP4CSUM_Tx,UDP4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Rx>
	capabilities=7ff80<TCP6CSUM_Tx,UDP6CSUM_Rx,UDP6CSUM_Tx,TSO6>
	enabled=0
	ec_capabilities=7<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU>
	ec_enabled=0
	address: 00:0d:b9:42:61:9d
	media: Ethernet autoselect (1000baseT full-duplex)
	status: active
	inet 192.168.88.2 netmask 0xffffff00 broadcast 192.168.88.255
	inet6 fe80::20d:b9ff:fe42:619d%wm1 prefixlen 64 scopeid 0x2
	inet6 fd4f:bd4e:6d27:2:de0b:f387:afeb:2 prefixlen 64
	inet6 2a02:168:c000:2:de0b:f387:afeb:2 prefixlen 64


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0.2 (GENERIC.201610210724Z)
total memory = 4079 MB
avail memory = 3943 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
PC Engines apu2 (1.0)
mainbus0 (root)
ACPI: RSDP 0xf30e0 000024 (v02 CORE  )
ACPI: XSDT 0xdffb80e0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: FACP 0xdffb96f0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: DSDT 0xdffb8250 001496 (v02 AMD    COREBOOT 00010001 INTL 20140114)
ACPI: FACS 0xdffb8210 000040
ACPI: SSDT 0xdffb97f0 000045 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
ACPI: APIC 0xdffb9840 00007E (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: HEST 0xdffb98c0 0001D0 (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: SSDT 0xdffb9a90 0048A6 (v02 AMD    AGESA    00000002 MSFT 04000000)
ACPI: SSDT 0xdffbe340 0007C8 (v01 AMD    AGESA    00000001 AMD  00000001)
ACPI: HPET 0xdffbeb10 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
ioapic1 at mainbus0 apid 5: pa 0xfec20000, version 0x21, 32 pins
cpu0 at mainbus0 apid 0: AMD GX-412TC SOC                               , id 0x730f01
cpu1 at mainbus0 apid 1: AMD GX-412TC SOC                               , id 0x730f01
cpu2 at mainbus0 apid 2: AMD GX-412TC SOC                               , id 0x730f01
cpu3 at mainbus0 apid 3: AMD GX-412TC SOC                               , id 0x730f01
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <CORE  ,COREBOOT,00000000>, AslId <CORE,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
COM1 (PNP0501) at acpi0 not configured
AWR0 (PNP0C02) at acpi0 not configured
ABR0 (PNP0C02) at acpi0 not configured
ABR1 (PNP0C02) at acpi0 not configured
ABR2 (PNP0C02) at acpi0 not configured
ABR3 (PNP0C02) at acpi0 not configured
ABR4 (PNP0C02) at acpi0 not configured
ACPI: Enabled 4 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x1566 (rev. 0x00)
pchb1 at pci0 dev 2 function 0: vendor 0x1022 product 0x156b (rev. 0x00)
ppb0 at pci0 dev 2 function 2: vendor 0x1022 product 0x1439 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci1 dev 0 function 0: I210 Ethernet (FLASH less) (rev. 0x03)
wm0: interrupting at ioapic1 pin 4
wm0: PCI-Express bus
wm0: 64 words iNVM
wm0: Ethernet address 00:0d:b9:42:61:9c
wm0: Copper
ukphy0 at wm0 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 2 function 3: vendor 0x1022 product 0x1439 (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci2 dev 0 function 0: I210 Ethernet (FLASH less) (rev. 0x03)
wm1: interrupting at ioapic1 pin 8
wm1: PCI-Express bus
wm1: 64 words iNVM
wm1: Ethernet address 00:0d:b9:42:61:9d
wm1: Copper
ukphy1 at wm1 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 2 function 4: vendor 0x1022 product 0x1439 (rev. 0x00)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
wm2 at pci3 dev 0 function 0: I210 Ethernet (FLASH less) (rev. 0x03)
wm2: interrupting at ioapic1 pin 12
wm2: PCI-Express bus
wm2: 64 words iNVM
wm2: Ethernet address 00:0d:b9:42:61:9e
wm2: Copper
ukphy2 at wm2 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
vendor 0x1022 product 0x1537 (miscellaneous crypto) at pci0 dev 8 function 0 not configured
vendor 0x1022 product 0x7814 (USB serial bus, xHCI, revision 0x11) at pci0 dev 16 function 0 not configured
pciide0 at pci0 dev 17 function 0: vendor 0x1022 product 0x7800 (rev. 0x40)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to native-PCI mode
pciide0: using ioapic0 pin 19 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel configured to native-PCI mode
atabus1 at pciide0 channel 1
ehci0 at pci0 dev 19 function 0: vendor 0x1022 product 0x7808 (rev. 0x39)
ehci0: interrupting at ioapic0 pin 18
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
vendor 0x1022 product 0x780b (SMBus serial bus, revision 0x42) at pci0 dev 20 function 0 not configured
pcib0 at pci0 dev 20 function 3: vendor 0x1022 product 0x780e (rev. 0x11)
sdhc0 at pci0 dev 20 function 7: vendor 0x1022 product 0x7813 (rev. 0x01)
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SD Host Specification 2.0, rev.16
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
pchb2 at pci0 dev 24 function 0: vendor 0x1022 product 0x1580 (rev. 0x00)
pchb3 at pci0 dev 24 function 1: vendor 0x1022 product 0x1581 (rev. 0x00)
pchb4 at pci0 dev 24 function 2: vendor 0x1022 product 0x1582 (rev. 0x00)
pchb5 at pci0 dev 24 function 3: vendor 0x1022 product 0x1583 (rev. 0x00)
pchb6 at pci0 dev 24 function 4: vendor 0x1022 product 0x1584 (rev. 0x00)
pchb7 at pci0 dev 24 function 5: vendor 0x1022 product 0x1585 (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: C2: I/O, lat 400 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow   980 mW, 1000 MHz
acpicpu0: P1: FFH, lat   4 us, pow   807 mW,  800 MHz
acpicpu0: P2: FFH, lat   4 us, pow   609 mW,  600 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 998187020 Hz quality 3000
uhub0 at usb0: vendor 0x1022 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
ld0 at sdmmc0: <0x1b:0x534d:00000:0x10:0x935c4c22:0x0e7>
ld0: 7543 MB, 3831 cyl, 64 head, 63 sec, 512 bytes/sect x 15448064 sectors
ld0: 4-bit width, bus clock 50.000 MHz
uhub1 at uhub0 port 1: vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2
uhub1: single transaction translator
uhub1: 4 ports with 4 removable, self powered
wd0 at atabus0 drive 0
wd0: <SATA SSD>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 15272 MB, 31029 cyl, 16 head, 63 sec, 512 bytes/sect x 31277232 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

On Sun, Dec 18, 2016 at 03:55:06PM +0100, Martin Husemann wrote:
> On Sun, Dec 18, 2016 at 03:08:35PM +0100, 76nemo76%gmx.ch@localhost wrote:
> > Hi All,
> >      I am working with an APU2 board (4gb, 3 lan and AMD CPu 1Ghz
> > you can see specifications here http://www.pcengines.ch/apu2.htm)
> > to make a router/firewall.
> 
> Can you give a few more details, e.g. the output of dmesg, and ifconfig
> for the interfaces used?
> 
> Martin
Follow-Ups:
- Re: APU2 routing speed NetBSD
  - From: Manuel Bouyer
References:
- APU2 routing speed NetBSD
  - From: 76nemo76
- Re: APU2 routing speed NetBSD
  - From: Martin Husemann
Prev by Date: NAT with ERLITE
Next by Date: Re: APU2 routing speed NetBSD
Previous by Thread: Re: APU2 routing speed NetBSD
Next by Thread: Re: APU2 routing speed NetBSD
Indexes:
Home | Main Index | Thread Index | Old Index