Re: iwn0

Thanks, my dmesg

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.0.2 (GENERIC.201610210724Z) total memory = 3996 MB avail memory = 3863 MB kern.module.path=/stand/amd64/7.0/modules timecounter: Timecounters tick every 10.000 msec RTC BIOS diagnostic error 0x80<clock_battery> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 LENOVO 20236 (Lenovo G500) mainbus0 (root) ACPI: RSDP 0xfe020 000024 (v02 LENOVO) ACPI: XSDT 0xccffe210 000094 (v01 LENOVO CB-01 00000001 01000013) ACPI: FACP 0xccffa000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000) ACPI: DSDT 0xccfec000 00A06F (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: FACS 0xccfbb000 000040 ACPI: SLIC 0xccffd000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: UEFI 0xccffc000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: ASF! 0xccffb000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000) ACPI: HPET 0xccff9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: APIC 0xccff8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000) ACPI: MCFG 0xccff7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: SSDT 0xccfeb000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: BOOT 0xccfe9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: ASPT 0xccfe7000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000) ACPI: DBGP 0xccfe6000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: FPDT 0xccfe4000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: SSDT 0xccfe2000 0008E4 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: SSDT 0xccfe1000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: All ACPI Tables successfully acquired ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 24 pins cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) CPU 2020M @ 2.40GHz, id 0x306a9 cpu1 at mainbus0 apid 2: Intel(R) Pentium(R) CPU 2020M @ 2.40GHz, id 0x306a9 acpi0 at mainbus0: Intel ACPICA 20131218 acpi0: X/RSDT: OemId <LENOVO,CB-01 ,00000001>, AslId < ,01000013> ACPI: SSDT 0xcce27018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120518) ACPI: SSDT 0x0 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120518) ACPI: SSDT 0xcce28a98 000303 (v01 PmRef ApIst 00003000 INTL 20120518) ACPI: SSDT 0x0 000303 (v01 PmRef ApIst 00003000 INTL 20120518) ACPI: SSDT 0xcce26d98 000119 (v01 PmRef ApCst 00003000 INTL 20120518) ACPI: SSDT 0x0 000119 (v01 PmRef ApCst 00003000 INTL 20120518) acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 acpiec0 at acpi0 (EC0, PNP0C09) : io 0x62,0x66 FWHD (INT0800) at acpi0 not configured LDRC (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 CWDT (INT3F0D) at acpi0 not configured acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button pckbc1 at acpi0 (PS2K, IDEA0102) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MSS4, ETD0613) (aux port): irq 12 VPC0 (VPC2004) at acpi0 not configured acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery acpibat0: LENOVO Li-Ion rechargeable battery acpibat0: granularity: low->warn 0.264 Wh, warn->full 3.780 Wh acpibat0: ACPI 4.0 functionality present acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter PDRC (PNP0C02) at acpi0 not configured acpivga0 at acpi0 (GFX0): ACPI Display Adapter acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device acpiout1: brightness levels: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device acpivga0: unknown output device acpiout0 acpivga0: unknown output device acpiout2 acpivga0: unknown output device acpiout3 acpivga0: unknown output device acpiout4 acpivga0: unknown output device acpiout5 acpivga0: unknown output device acpiout6 acpivga0: unknown output device acpiout7 acpivga0: connected output devices: acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0 MEM2 (PNP0C01) at acpi0 not configured acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch PTID (INT340E) at acpi0 not configured acpitz0 at acpi0 (TZ00): cpu0 cpu1 acpitz0: levels: critical 127.0 C, hot 127.0 C, passive 0.0 C, passive cooling ACPI: Enabled 4 GPEs in block 00 to 3F ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646) pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0154 (rev. 0x09) i915drmkms0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0156 (rev. 0x09) drm: Memory usable by graphics device = 2048M drm: Supports vblank timestamp caching Rev 2 (21.10.2013). drm: Driver supports precise vblank timestamp query. i915drmkms0: interrupting at ioapic0 pin 16 (i915) intelfb0 at i915drmkms0 i915drmkms0: info: registered panic notifier intelfb0: framebuffer at 0xffff800046fbf000, size 1366x768, depth 32, stride 5504 wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 wsmux1: connecting to wsdisplay0 vendor 0x8086 product 0x1e31 (USB serial bus, xHCI, revision 0x04) at pci0 dev 20 function 0 not configured vendor 0x8086 product 0x1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1e2d (rev. 0x04) ehci0: interrupting at ioapic0 pin 16 ehci0: BIOS refuses to give up ownership, using force ehci0: EHCI version 1.0 usb0 at ehci0: USB revision 2.0 hdaudio0 at pci0 dev 27 function 0: HD Audio Controller hdaudio0: interrupting at ioapic0 pin 22 hdafg0 at hdaudio0: Conexant product 0x5115 hdafg0: DAC00 2ch: Speaker [Built-In] hdafg0: ADC01 2ch: Mic In [Built-In] hdafg0: ADC02 2ch: Mic In [Jack] hdafg0: DAC03 2ch: HP Out [Jack] hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 audio0 at hdafg0: full duplex, playback, capture, mmap, independent hdafg1 at hdaudio0: Intel product 0x2806 hdafg1: DP00 8ch: Digital Out [Jack] hdafg1: 8ch/0ch 48000Hz PCM16* ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x1e10 (rev. 0xc4) ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb0: link is x1 @ 2.5GT/s pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok alc0 at pci1 dev 0 function 0: Atheros AR8172 PCIe Fast Ethernet alc0: interrupting at ioapic0 pin 16 alc0: Ethernet address xx:xx:xx:xx:xx:xx atphy0 at alc0 phy 0: Atheros AR8035 10/100/1000 PHY, rev. 9 atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x1e12 (rev. 0xc4) ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s ppb1: link is x1 @ 2.5GT/s pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok iwn0 at pci2 dev 0 function 0: vendor 0x8086 product 0x0893 (rev. 0xc4) iwn0: interrupting at ioapic0 pin 17 iwn0: MIMO 1T1R, BGN, address xx:xx:xx:xx:xx:xx iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1e26 (rev. 0x04) ehci1: interrupting at ioapic0 pin 23 ehci1: BIOS refuses to give up ownership, using force ehci1: EHCI version 1.0 usb1 at ehci1: USB revision 2.0 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1e5e (rev. 0x04) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x1e03 (rev. 0x04) ahcisata0: interrupting at ioapic0 pin 19 ahcisata0: 64-bit DMA ahcisata0: AHCI revision 1.30, 4 ports, 32 slots, CAP 0xcf30ff43<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SNCQ,S64A> atabus0 at ahcisata0 channel 0 atabus1 at ahcisata0 channel 2 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x1e22 (rev. 0x04) ichsmb0: interrupting at ioapic0 pin 19 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 attimer1: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: FFH, lat 1 us, pow 1000 mW acpicpu0: C2: FFH, lat 80 us, pow 350 mW acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2400 MHz acpicpu0: P1: FFH, lat 10 us, pow 32872 mW, 2300 MHz acpicpu0: P2: FFH, lat 10 us, pow 31127 mW, 2200 MHz acpicpu0: P3: FFH, lat 10 us, pow 29417 mW, 2100 MHz acpicpu0: P4: FFH, lat 10 us, pow 27740 mW, 2000 MHz acpicpu0: P5: FFH, lat 10 us, pow 26096 mW, 1900 MHz acpicpu0: P6: FFH, lat 10 us, pow 24490 mW, 1800 MHz acpicpu0: P7: FFH, lat 10 us, pow 22588 mW, 1700 MHz acpicpu0: P8: FFH, lat 10 us, pow 21045 mW, 1600 MHz acpicpu0: P9: FFH, lat 10 us, pow 19534 mW, 1500 MHz acpicpu0: P10: FFH, lat 10 us, pow 18055 mW, 1400 MHz acpicpu0: P11: FFH, lat 10 us, pow 16611 mW, 1300 MHz acpicpu0: P12: FFH, lat 10 us, pow 15194 mW, 1200 MHz acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=90 acpicpu1 at cpu1: ACPI CPU coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=90 DRM error in cpt_serr_int_handler: PCH transcoder A FIFO underrun timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "TSC" frequency 2394823880 Hz quality 3000 acpiacad0: AC adapter online. IPsec: Initialized Security Association Processing. uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ahcisata0 port 0: device present, speed: 3.0Gb/s ahcisata0 port 2: device present, speed: 1.5Gb/s drm: Enabling RC6 states: RC6 on, RC6p on, RC6pp off wd0 at atabus0 drive 0 wd0: <ST500LT012-9WS142> wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 465 GB, 1033622 cyl, 15 head, 63 sec, 512 bytes/sect x 976773168 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA) atapibus0 at atabus1: 1 targets cd0 at atapibus0 drive 0: <PLDS DVD-RW DS8A9SH, O10A11857L1CG391JZX, EL3A> cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) cd0(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) uhub2 at uhub0 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2 uhub2: single transaction translator uhub3 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2 uhub3: single transaction translator uhub2: 4 ports with 4 removable, self powered uhub3: 4 ports with 4 removable, self powered ubt0 at uhub2 port 3 ubt0: vendor 0x8087 product 0x07da, rev 2.00/78.69, addr 3 uvideo0 at uhub3 port 4 configuration 1 interface 0: Generic Lenovo EasyCamera, rev 2.00/3.27, addr 3 video0 at uvideo0: Generic Lenovo EasyCamera, rev 2.00/3.27, addr 3 ugen0 at uhub2 port 4 ugen0: Generic USB2.0-CRW, rev 2.00/39.60, addr 4 Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex, playback, capture boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs acpibat0: normal capacity on 'charge state' wsdisplay0: screen 1 added (default, vt100 emulation) wsdisplay0: screen 2 added (default, vt100 emulation) wsdisplay0: screen 3 added (default, vt100 emulation) wsdisplay0: screen 4 added (default, vt100 emulation) set{u,g}id pid 1804 (gnome-pty-helper) was invoked by uid 1000 ppid 2457 (xfce4-terminal) with fd 2 closed set{u,g}id pid 587 (gnome-pty-helper) was invoked by uid 1000 ppid 2702 (xfce4-terminal) with fd 2 closed set{u,g}id pid 2844 (gnome-pty-helper) was invoked by uid 1000 ppid 2709 (xfce4-terminal) with fd 2 closed

On 16-Feb-2017 7:43 PM, "Ian Clark" <mrrooster%gmail.com@localhost> wrote:

On 14 February 2017 at 17:17, Jay Patel <jaypatel.ani%gmail.com@localhost> wrote:
> Hello,
>
> Greetings,
>
> I am keep getting this error with [uname -a : NetBSD 7.0.2 NetBSD 7.0.2
> (GENERIC.201610210724Z) amd64]
>
> iwn0: fatal firmware error
> iwn0: bad firmware error log address 0x00000000
> iwn0: timeout waiting for adapter to initialize
> iwn0: could not initialize hardware

[snip]

>
> 002:00:0: Intel Centrino Wireless-N 135 (miscellaneous network, revision
> 0xc4)
>

It looks like this card is supported by the driver, (man iwn), do you
have files in /libdata/firmware/if_iwn?

Specifically I think you need: iwlwifi-135-6.ucode at a guess??

> I am new in NetBSD community let me know if i made any mistake in reporting.
> Thanks,

The output of 'dmesg' will probably help too..... :)

Cheers,

Ian