Re: [pkgsrc] ICU needs configure CFLAGS='-03'

[Chavdar Ivanov <ci4ic4%gmail.com@localhost>]

PKGSRC_USE_SSP=NO in /etc/mk.conf

Chavdar Ivanov

On 14 November 2017 at 14:21,  <tlaronde%polynum.com@localhost> wrote:
> On Tue, Nov 14, 2017 at 03:08:29PM +0100, Benny Siegert wrote:
>> Can you post the entire config.log?
>>
>
> Attached.
>
> (Indeed there is the info: libssp not found---what is it?)
>
> Best regards.
>
>> On Tue, Nov 14, 2017 at 3:06 PM,  <tlaronde%polynum.com@localhost> wrote:
>> > On Tue, Nov 14, 2017 at 02:04:44PM +0100, Benny Siegert wrote:
>> >> > When configure is run from pkgsrc, it fails.
>> >> >
>> >> > Not knowing the guts of the pkgsrc framework, I'm a bit at a loss to
>> >> > have a clue about what is going wrong...
>> >>
>> >> Please do the following:
>> >>
>> >> 1. Run "make configure", watch it fail.
>> >> 2. Look in work/icu-*/config.log for the failing compiler invocation.
>> >> Post the relevant bit.
>> >
>> > The only info in config.log is:
>> >
>> > configure: exit 77
>> >
>> > The relevant bit failing is the invocation of the compiler to find the
>> > extension (suffix) of the executable, that is (extract from configure):
>> >
>> > ----8<---
>> > cat confdefs.h - <<_ACEOF >conftest.$ac_ext
>> > /* end confdefs.h.  */
>> >
>> > int
>> > main ()
>> > {
>> >
>> >   ;
>> >   return 0;
>> > }
>> > _ACEOF
>> > ac_clean_files_save=$ac_clean_files
>> > ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
>> > # Try to create an executable without -o first, disregard a.out.
>> > # It will help us diagnose broken compilers, and finding out an intuition
>> > # of exeext.
>> > { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
>> > $as_echo_n "checking whether the C compiler works... " >&6; }
>> > ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
>> >
>> > # The possible output files:
>> > ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
>> >
>> > ac_rmfiles=
>> > for ac_file in $ac_files
>> > do
>> >   case $ac_file in
>> >     *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
>> >     * ) ac_rmfiles="$ac_rmfiles $ac_file";;
>> >   esac
>> > done
>> > rm -f $ac_rmfiles
>> >
>> > if { { ac_try="$ac_link_default"
>> > case "(($ac_try" in
>> >   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
>> >   *) ac_try_echo=$ac_try;;
>> > esac
>> > eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
>> > $as_echo "$ac_try_echo"; } >&5
>> >   (eval "$ac_link_default") 2>&5
>> >   ac_status=$?
>> >   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
>> >   test $ac_status = 0; }; then :
>> >   # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
>> > # So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
>> > # in a Makefile.  We should not override ac_cv_exeext if it was cached,
>> > # so that the user can short-circuit this test for compilers unknown to
>> > # Autoconf.
>> > for ac_file in $ac_files ''
>> > do
>> >   test -f "$ac_file" || continue
>> >   case $ac_file in
>> >     *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
>> >         ;;
>> >     [ab].out )
>> >         # We found the default executable, but exeext='' is most
>> >         # certainly right.
>> >         break;;
>> >     *.* )
>> >         if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
>> >         then :; else
>> >            ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
>> >         fi
>> >         # We set ac_cv_exeext here because the later test for it is not
>> >         # safe: cross compilers may not add the suffix if given an `-o'
>> >         # argument, so we may need to know it at that point already.
>> >         # Even if this section looks crufty: it has the advantage of
>> >         # actually working.
>> >         break;;
>> >     * )
>> >         break;;
>> >   esac
>> > done
>> > test "$ac_cv_exeext" = no && ac_cv_exeext=
>> >
>> > else
>> >   ac_file=''
>> > fi
>> > if test -z "$ac_file"; then :
>> >   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
>> > $as_echo "no" >&6; }
>> > $as_echo "$as_me: failed program was:" >&5
>> > sed 's/^/| /' conftest.$ac_ext >&5
>> >
>> > { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
>> > $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
>> > as_fn_error 77 "C compiler cannot create executables
>> > See \`config.log' for more details" "$LINENO" 5; }
>> > else
>> >   { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
>> > $as_echo "yes" >&6; }
>> > fi
>> > --->8---
>> >
>> > Since this is this configure, produced by pkgsrc, that I run directly,
>> > except the way it is invoked (and the directory), I fail to grab what
>> > may be causing the problem---unless the environment set by make(1), with
>> > the numerous utilities set by macros, replace a default working by a not
>> > working one.
>> >
>> > TIA,
>> > --
>> >         Thierry Laronde <tlaronde +AT+ polynum +dot+ com>
>> >                      http://www.kergis.com/
>> >                        http://www.sbfa.fr/
>> > Key fingerprint = 0FF7 E906 FBAF FE95 FD89  250D 52B1 AE95 6006 F40C
>>
>>
>>
>> --
>> The first essential in chemistry is that you should perform practical
>> work and conduct experiments, for he who performs not practical work
>> nor makes experiments will never attain the least degree of mastery.
>>         -- Abu Musa Jabir ibn Hayyan (721-815)
>
> --
>         Thierry Laronde <tlaronde +AT+ polynum +dot+ com>
>                      http://www.kergis.com/
>                        http://www.sbfa.fr/
> Key fingerprint = 0FF7 E906 FBAF FE95 FD89  250D 52B1 AE95 6006 F40C



-- 
----