Re: Status of run0 support on NetBSD 8.0_RC1

[Patrick Welche <prlw1%cam.ac.uk@localhost>]

On Tue, Jun 12, 2018 at 04:14:50PM +0530, Mayuresh wrote:
> Just realize the issue is not arm specific, faced the same on amd64.
> NetBSD asusnetbsd 8.0_RC1 NetBSD 8.0_RC1 (GENERIC.201804191727Z) amd64
> 
> 
> On Mon, Jun 11, 2018 at 09:19:05PM +0530, Mayuresh wrote:
> > Just want to check whether run0 is expected to work on the following
> > setup:
> > 
> > # uname -a
> > NetBSD armv7 8.0_RC1 NetBSD 8.0_RC1 (RPI2.201804240813Z) evbarm
> > 
> > 
> > # dmesg | grep run0
> > run0 at uhub1 port 3
> > run0: Ralink (0x148f) 802.11 n WLAN (0x5370), rev 2.00/1.01, addr 4
> > run0: MAC/BBP RT5390 (rev 0x0502), RF RT5592 (MIMO 1T1R), address
> > 00:c1:00:c1:94:b6
> > run0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> > run0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> > run0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> > 24Mbps 36Mbps 48Mbps 54Mbps
> > 
> > # wpa_cli status
> > Selected interface 'run0'
> > 20:31:07.754: wpa_state=SCANNING
> > address=00:c1:00:c1:94:b6

That reminds me of:

http://mail-index.netbsd.org/tech-net/2017/01/19/msg006248.html

Some feedback would have been / would be nice...

Cheers,

Patrick