Once you get a grub menu, you need to specify 'noapic'. Linux runs aggressive hw checks that fail under hypervisors (NVMM is not to be blamed). The right solution is to patch the Linux kernel and disable the checks for NVMM and HAXM. On 08.10.2019 18:20, Robert Nestor wrote: > Thanks! I tried adding “-no-acpi” to the QEMU command line and that eliminated the messages from QEMU, but the Linux installer still failed. I then tried using “-append noacpi” on the QEMU command line, but that is only available with one also uses “-kernel”. So I guess one can’t boot an installation CD this way. > > > On Oct 8, 2019, at 9:40 AM, Kamil Rytarowski <n54%gmx.com@localhost> wrote: > >> On 08.10.2019 16:31, Robert Nestor wrote: >>> Playing with nvmm in an Oct 9 NetBSD 9.0 build. Sucessfully installed >>> a version of NetBSD 8.0 but ran into problems tryuing to install a >>> LinuxMint 19.2 64-bit system. Nvmm throws these errors: >>> >>> qemu-system-x86_64: NVMM: Unexpected WRMSR 0x1c9 [val=0x3], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x1c9 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x1a6 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected WRMSR 0x1a6 [val=0x11], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x1a6 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x1a7 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected WRMSR 0x1a7 [val=0x11], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x1a7 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x3f6 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected WRMSR 0x3f6 [val=0x11], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x3f6 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x186 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x187 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x188 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x189 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x38d [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0xc4 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected WRMSR 0xc4 [val=0xffff], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0xc4 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x140 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0xce [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected WRMSR 0x140 [val=0x0], ignored >>> qemu-system-x86_64: NVMM: Unexpected RDMSR 0x34 [val=0x0], ignored >>> >>> And the Linux installer panics. >>> >>> Qemu was invoked with: >>> >>> qemu-system-x86_64 -m 256 -accel nvmm -cdrom /home/linuxmint-19.2-xfce-64bit.iso -name "LinuxMint-19.2 Install" -smp 2 -netdev tap,id=nd0,ifname=tap0,script=no,downscript=no -device rtl8139,netdev=nd0 -drive file=/home/LinuxMint-19.2.dsk,media=disk,format=raw >>> >>> Any ideas, or am I missing some important qmeu option here? NetBSD runs fine with this set of options in qemu. >>> >> >> Ignore the warnigs and set 'noapic' on boot in the bootloader. >> >
Attachment:
signature.asc
Description: OpenPGP digital signature