dmesg of NetBSD 8.1 (INSTALL) on 'Thinkpad R60e (type 9461)'

[<zeurkous%volny.cz@localhost>]

[not subscribed, please Cc, thanks.]

> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
>     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
>     2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
> 
> NetBSD 8.1 (INSTALL) #0: Fri May 31 08:43:59 UTC 2019
> 	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/i386/compile/INSTALL
> total memory = 3070 MB
> avail memory = 2999 MB
> timecounter: Timecounters tick every 10.000 msec
> Kernelized RAIDframe activated
> running cgd selftest aes-xts-256 aes-xts-512 done
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> LENOVO 9461DXG (ThinkPad R60)
> mainbus0 (root)
> ACPI: RSDP 0x00000000000F6840 000024 (v02 LENOVO)
> ACPI: XSDT 0x00000000BFED1674 000084 (v01 LENOVO TP-7C    00002050  LTP 00000000)
> ACPI: FACP 0x00000000BFED1800 0000F4 (v03 LENOVO TP-7C    00002050 LNVO 00000001)
> ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170303/tbfadt-642)
> ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20170303/tbfadt-693)
> ACPI: DSDT 0x00000000BFED1C32 00D1BF (v01 LENOVO TP-7C    00002050 MSFT 0100000E)
> ACPI: FACS 0x00000000BFEF4000 000040
> ACPI: FACS 0x00000000BFEF4000 000040
> ACPI: SSDT 0x00000000BFED19B4 00027E (v01 LENOVO TP-7C    00002050 MSFT 0100000E)
> ACPI: ECDT 0x00000000BFEDEDF1 000052 (v01 LENOVO TP-7C    00002050 LNVO 00000001)
> ACPI: TCPA 0x00000000BFEDEE43 000032 (v02 LENOVO TP-7C    00002050 LNVO 00000001)
> ACPI: APIC 0x00000000BFEDEE75 000068 (v01 LENOVO TP-7C    00002050 LNVO 00000001)
> ACPI: MCFG 0x00000000BFEDEEDD 00003C (v01 LENOVO TP-7C    00002050 LNVO 00000001)
> ACPI: HPET 0x00000000BFEDEF19 000038 (v01 LENOVO TP-7C    00002050 LNVO 00000001)
> ACPI: BOOT 0x00000000BFEDEFD8 000028 (v01 LENOVO TP-7C    00002050  LTP 00000001)
> ACPI: SSDT 0x00000000BFEF2655 00025F (v01 LENOVO TP-7C    00002050 INTL 20050513)
> ACPI: SSDT 0x00000000BFEF28B4 0000A6 (v01 LENOVO TP-7C    00002050 INTL 20050513)
> ACPI: SSDT 0x00000000BFEF295A 0004F7 (v01 LENOVO TP-7C    00002050 INTL 20050513)
> ACPI: SSDT 0x00000000BFEF2E51 0001D8 (v01 LENOVO TP-7C    00002050 INTL 20050513)
> ACPI: 6 ACPI AML tables successfully acquired and loaded
> ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
> cpu0 at mainbus0 apid 0
> cpu0: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz, id 0x6f6
> cpu0: package 0, core 0, smt 0
> cpu1 at mainbus0 apid 1
> cpu1: feature mismatch: cpu_feature[2] is 0x20000000, but CPU reported 0x20100000
> cpu1: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz, id 0x6f6
> cpu1: package 0, core 1, smt 0
> acpi0 at mainbus0: Intel ACPICA 20170303
> acpi0: X/RSDT: OemId <LENOVO,TP-7C   ,00002050>, AslId < LTP,00000000>
> acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
> acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0x00000000C4CA1944 000240 (v01 PmRef  Cpu0Ist  00000100 INTL 20050513)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0x00000000C4CCD004 00065A (v01 PmRef  Cpu0Cst  00000100 INTL 20050513)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0x00000000C4959B74 0000C8 (v01 PmRef  Cpu1Ist  00000100 INTL 20050513)
> ACPI: Dynamic OEM Table Load:
> ACPI: SSDT 0x00000000C4CA0E74 000085 (v01 PmRef  Cpu1Cst  00000100 INTL 20050513)
> acpi0: SCI interrupting at int 9
> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
> hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
> timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
> acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
> MEM (PNP0C01) at acpi0 not configured
> acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
> acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
> SIO (PNP0C02) at acpi0 not configured
> attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
> pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
> midi0 at pcppi1: PC speaker
> sysbeep0 at pcppi1
> FPU (PNP0C04) at acpi0 not configured
> pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
> pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
> acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
> acpibat0: sa~wsoni LION rechargeable battery
> acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
> acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
> thinkpad0 at acpi0 (HKEY, IBM0068)
> acpivga0 at acpi0 (VID): ACPI Display Adapter
> acpiout0 at acpivga0 (LCD0, 0x0110): ACPI Display Output Device
> acpiout0: brightness levels: [30,40,50,60,70,80,90,100]
> acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
> acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output Device
> acpiout3 at acpivga0 (DVI0, 0x0210): ACPI Display Output Device
> acpivga0: connected output devices:
> acpivga0:   0x0100 (acpiout1): Ext. Monitor, head 0
> acpivga0:   0x0200 (acpiout2): TV, head 0
> acpivga0:   0x0210 (acpiout3): Unknown Output Device, head 0
> acpivga0:   0x0110 (acpiout0): LCD Panel, head 0
> acpitz0 at acpi0 (THM0)
> acpitz0: levels: critical 127.0 C, passive cooling
> acpitz1 at acpi0 (THM1): cpu0 cpu1
> acpitz1: levels: critical 100.0 C, passive 95.5 C, passive cooling
> apm0 at acpi0: Power Management spec V1.2
> ACPI: Enabled 2 GPEs in block 00 to 1F
> attimer1: attached to pcppi1
> pckbd0 at pckbc1 (kbd slot)
> pckbc1: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc1 (aux slot)
> pckbc1: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0: vendor 8086 product 27a0 (rev. 0x03)
> agp0 at pchb0: can't find internal VGA config space
> ppb0 at pci0 dev 1 function 0: vendor 8086 product 27a1 (rev. 0x03)
> ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled, rd/line, wr/inv ok
> vga1 at pci1 dev 0 function 0: vendor 1002 product 7145 (rev. 0x00)
> wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
> wsmux1: connecting to wsdisplay0
> drm at vga1 not configured
> hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
> hdaudio0: interrupting at msi0 vec 0
> hdafg0 at hdaudio0: vendor 11d4 product 1981
> hdafg0: DAC00 2ch: Speaker [Jack & Built-In]
> hdafg0: ADC01 2ch: CD [Built-In], Mic In [Jack & Built-In]
> hdafg0: DIG02 2ch: SPDIF Out [Jack]
> hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz PCM16 PCM20 PCM24 AC3
> audio0 at hdafg0: full duplex, playback, capture, mmap, independent
> hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
> hdafg0: Latency: 128 milliseconds
> hdvsmfg at hdaudio0 not configured
> ppb1 at pci0 dev 28 function 0: vendor 8086 product 27d0 (rev. 0x02)
> ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
> pci2 at ppb1 bus 2
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> bge0 at pci2 dev 0 function 0: Broadcom BCM5751M Gigabit Ethernet
> bge0: interrupting at msi1 vec 0
> bge0: HW config 00080115, 00004015, 00000038, 00000000 00000000
> bge0: ASIC BCM5750 C1 (0x4201), Ethernet address XX:CE:NS:OR:ED:XX 
> bge0: setting short Tx thresholds
> brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
> ppb2 at pci0 dev 28 function 1: vendor 8086 product 27d2 (rev. 0x02)
> ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
> pci3 at ppb2 bus 3
> pci3: i/o space, memory space enabled, rd/line, wr/inv ok
> ath0 at pci3 dev 0 function 0: Atheros 5212
> ath0: interrupting at ioapic0 pin 17
> ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
> ath0: mac 10.3 phy 6.1 radio 10.2
> ppb3 at pci0 dev 28 function 2: vendor 8086 product 27d4 (rev. 0x02)
> ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
> pci4 at ppb3 bus 4
> pci4: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb4 at pci0 dev 28 function 3: vendor 8086 product 27d6 (rev. 0x02)
> ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
> pci5 at ppb4 bus 12
> pci5: i/o space, memory space enabled, rd/line, wr/inv ok
> uhci0 at pci0 dev 29 function 0: vendor 8086 product 27c8 (rev. 0x02)
> uhci0: interrupting at ioapic0 pin 16
> usb0 at uhci0: USB revision 1.0
> uhci1 at pci0 dev 29 function 1: vendor 8086 product 27c9 (rev. 0x02)
> uhci1: interrupting at ioapic0 pin 17
> usb1 at uhci1: USB revision 1.0
> uhci2 at pci0 dev 29 function 2: vendor 8086 product 27ca (rev. 0x02)
> uhci2: interrupting at ioapic0 pin 18
> usb2 at uhci2: USB revision 1.0
> uhci3 at pci0 dev 29 function 3: vendor 8086 product 27cb (rev. 0x02)
> uhci3: interrupting at ioapic0 pin 19
> usb3 at uhci3: USB revision 1.0
> ehci0 at pci0 dev 29 function 7: vendor 8086 product 27cc (rev. 0x02)
> ehci0: interrupting at ioapic0 pin 19
> ehci0: EHCI version 1.0
> ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
> usb4 at ehci0: USB revision 2.0
> ppb5 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xe2)
> pci6 at ppb5 bus 21
> pci6: i/o space, memory space enabled
> cbb0 at pci6 dev 0 function 0: vendor 104c product 8039 (rev. 0x00)
> fwohci0 at pci6 dev 0 function 1: vendor 104c product 803a (rev. 0x00)
> fwohci0: interrupting at ioapic0 pin 17
> fwohci0: OHCI version 1.10 (ROM=0)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 0a:00:06:e4:20:43:16:a3
> fwohci0: Phy 1394a available S400, 3 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> ieee1394if0 at fwohci0: IEEE1394 bus
> fwip0 at ieee1394if0: IP over IEEE1394
> fwohci0: Initiate bus reset
> fwohci0: Clear PME# now
> cbb0: cacheline 0x8 lattimer 0xa8
> cbb0: bhlc 0x82a808
> cbb0: interrupting at ioapic0 pin 16
> cardslot0 at cbb0
> cardbus0 at cardslot0: bus 22
> pcmcia0 at cardslot0
> ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 27b9 (rev. 0x02)
> timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
> ichlpcib0: 24-bit timer
> tco0 at ichlpcib0: TCO (watchdog) timer configured.
> tco0: Min/Max interval 1/367 seconds
> piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
> piixide0: bus-master DMA support present
> piixide0: primary channel configured to compatibility mode
> piixide0: primary channel interrupting at ioapic0 pin 14
> atabus0 at piixide0 channel 0
> piixide0: secondary channel configured to compatibility mode
> piixide0: secondary channel ignored (disabled)
> ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 27c5 (rev. 0x02)
> ahcisata0: interrupting at ioapic0 pin 16
> ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 0xc710ff03<PSC,SSC,PMD,ISS=0x1=Gen1,SCLO,SAL,SALP,SNCQ,S64A>
> atabus1 at ahcisata0 channel 0
> ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 27da (rev. 0x02)
> ichsmb0: interrupting at ioapic0 pin 23
> iic0 at ichsmb0: I2C bus
> isa0 at ichlpcib0
> tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: ATML 97SC3203 rev 0x5
> acpicpu0 at cpu0: ACPI CPU
> acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
> acpicpu0: C2: FFH, lat   1 us, pow   500 mW
> acpicpu0: C3: FFH, lat  17 us, pow   250 mW, bus master check
> acpicpu0: P0: FFH, lat  10 us, pow 31000 mW, 1833 MHz
> acpicpu0: P1: FFH, lat  10 us, pow 20000 mW, 1333 MHz
> acpicpu0: P2: FFH, lat  10 us, pow 13000 mW, 1000 MHz
> acpicpu0: T0: FFH, lat   1 us, pow 13000 mW, 100 %
> acpicpu0: T1: FFH, lat   1 us, pow 11375 mW,  88 %
> acpicpu0: T2: FFH, lat   1 us, pow  9750 mW,  75 %
> acpicpu0: T3: FFH, lat   1 us, pow  8125 mW,  63 %
> acpicpu0: T4: FFH, lat   1 us, pow  6500 mW,  50 %
> acpicpu0: T5: FFH, lat   1 us, pow  4875 mW,  38 %
> acpicpu0: T6: FFH, lat   1 us, pow  3250 mW,  25 %
> acpicpu0: T7: FFH, lat   1 us, pow  1625 mW,  13 %
> coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
> acpicpu1 at cpu1: ACPI CPU
> coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
> fwohci0: BUS reset
> fwohci0: node_id=0xc000ffc0, gen=2, CYCLEMASTER mode
> ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
> ieee1394if0: bus manager 0
> fwohci0: phy int
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> acpiacad0: AC adapter online.
> IPsec: Initialized Security Association Processing.
> atapibus0 at atabus0: 2 targets
> uhub0 at usb2: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhub1 at usb4: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
> uhub1: 8 ports with 8 removable, self powered
> uhub2 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GMA-4082N, M006BAG0410, CX08> cdrom removable
> uhub3 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> uhub4 at usb3: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
> uhub4: 2 ports with 2 removable, self powered
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
> cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
> ahcisata0 port 0: device present, speed: 1.5Gb/s
> wd0 at atabus1 drive 0
> wd0: <WDC WD3200BEVT-22ZCT0>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
> wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
> WARNING: 2 errors while detecting hardware; check system log.
> boot device: <unknown>
> md0: internal 5000 KB image area
> root on md0a dumps on md0b
> root file system type: ffs
> kern.module.path=/stand/i386/8.1/modules
> WARNING: clock gained 147 days
> warning: no /dev/console
> ugen0 at uhub4 port 2
> ugen0: STMicroelectronics (0x483) Biometric Coprocessor (0x2016), rev 1.00/0.01, addr 2
> acpibat0: normal capacity on 'charge state'

-- 
Friggin' Machines!