Re: No HDMI output on Lenovo V145, NetBSD 8.0

[Mayuresh <mayuresh%acm.org@localhost>]

On Tue, Dec 10, 2019 at 11:52:38AM -0600, Greg Oster wrote:
> You might want to try x11/xf86-video-amdgpu and see how far you get
> with that.... 

Ok. I installed 9.0RC1.

Touchpad is still not working.

If I do X -configure it does set the driver to amdgpu, but that config
file doesn't work. Attaching a log (this is when X starts having tried out
amdgpu).

I think these lines are relevant:

 85 [   151.674] (II) AMDGPU(0): [KMS] drm report modesetting isn't supported.
 86 [   151.692] (II) AMDGPU(1): [KMS] drm report modesetting isn't supported.


This is using base X11 of 9.0RC1. So I think that should be recent enough
and there should be no need to try pkg X11 separately.

Mayuresh

[   151.645] 
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[   151.645] Build Operating System: NetBSD/amd64 9.0_RC1 - The NetBSD Foundation, Inc.
[   151.645] Current Operating System: NetBSD localhost 9.0_RC1 NetBSD 9.0_RC1 (GENERIC) #0: Wed Nov 27 16:14:52 UTC 2019  mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC amd64
[   151.645] Build Date: 03 March 2019  07:11:23AM
[   151.645]  
[   151.645] Current version of pixman: 0.38.4
[   151.645] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   151.645] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   151.645] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 11 08:44:03 2019
[   151.645] (++) Using config file: "/root/xorg.conf.new"
[   151.646] (==) ServerLayout "X.org Configured"
[   151.646] (**) |-->Screen "Screen0" (0)
[   151.646] (**) |   |-->Monitor "Monitor0"
[   151.646] (**) |   |-->Device "Card0"
[   151.646] (**) |-->Screen "Screen1" (1)
[   151.646] (**) |   |-->Monitor "Monitor1"
[   151.646] (**) |   |-->Device "Card1"
[   151.646] (**) |-->Input Device "Mouse0"
[   151.646] (**) |-->Input Device "Keyboard0"
[   151.646] (==) Not automatically adding devices
[   151.646] (==) Not automatically enabling devices
[   151.646] (==) Not automatically adding GPU devices
[   151.646] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   151.646] (**) FontPath set to:
	/usr/X11R7/lib/X11/fonts/misc/,
	/usr/X11R7/lib/X11/fonts/TTF/,
	/usr/X11R7/lib/X11/fonts/Type1/,
	/usr/X11R7/lib/X11/fonts/75dpi/,
	/usr/X11R7/lib/X11/fonts/100dpi/,
	/usr/X11R7/lib/X11/fonts/misc/,
	/usr/X11R7/lib/X11/fonts/TTF/,
	/usr/X11R7/lib/X11/fonts/Type1/,
	/usr/X11R7/lib/X11/fonts/75dpi/,
	/usr/X11R7/lib/X11/fonts/100dpi/
[   151.646] (**) ModulePath set to "/usr/X11R7/lib/modules"
[   151.646] (II) Loader magic: 0x1c288ea20
[   151.646] (II) Module ABI versions:
[   151.646] 	X.Org ANSI C Emulation: 0.4
[   151.646] 	X.Org Video Driver: 24.0
[   151.646] 	X.Org XInput driver : 24.1
[   151.646] 	X.Org Server Extension : 10.0
[   151.649] (--) PCI:*(0@0:1:0) 1002:98e4:17aa:39f5 rev 234, Mem @ 0xe8000000/134217728, 0xf0800000/8388608, 0xf0400000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[   151.649] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[   151.649] (II) LoadModule: "dri"
[   151.649] (II) Module "dri" already built-in
[   151.649] (II) LoadModule: "dri2"
[   151.649] (II) Module "dri2" already built-in
[   151.649] (II) LoadModule: "glx"
[   151.650] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
[   151.650] (II) Module glx: vendor="X.Org Foundation"
[   151.650] 	compiled for 1.20.5, module version = 1.0.0
[   151.650] 	ABI class: X.Org Server Extension, version 10.0
[   151.650] (II) LoadModule: "shadow"
[   151.651] (II) Loading /usr/X11R7/lib/modules/extensions/libshadow.so
[   151.651] (II) Module shadow: vendor="X.Org Foundation"
[   151.651] 	compiled for 1.20.5, module version = 1.1.0
[   151.651] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   151.651] (II) LoadModule: "amdgpu"
[   151.651] (II) Loading /usr/X11R7/lib/modules/drivers/amdgpu_drv.so
[   151.652] (II) Module amdgpu: vendor="X.Org Foundation"
[   151.652] 	compiled for 1.20.5, module version = 19.0.1
[   151.652] 	Module class: X.Org Video Driver
[   151.652] 	ABI class: X.Org Video Driver, version 24.0
[   151.652] (II) LoadModule: "mouse"
[   151.652] (II) Loading /usr/X11R7/lib/modules/drivers/mouse_drv.so
[   151.652] (II) Module mouse: vendor="X.Org Foundation"
[   151.652] 	compiled for 1.20.5, module version = 1.9.2
[   151.652] 	Module class: X.Org XInput Driver
[   151.652] 	ABI class: X.Org XInput driver, version 24.1
[   151.652] (II) LoadModule: "kbd"
[   151.653] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
[   151.653] (II) Module kbd: vendor="X.Org Foundation"
[   151.653] 	compiled for 1.20.5, module version = 1.9.0
[   151.653] 	Module class: X.Org XInput Driver
[   151.653] 	ABI class: X.Org XInput driver, version 24.1
[   151.653] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[   151.653] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
[   151.653] (--) using VT number 5
[   151.674] (II) AMDGPU(0): [KMS] drm report modesetting isn't supported.
[   151.692] (II) AMDGPU(1): [KMS] drm report modesetting isn't supported.
[   151.692] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   151.692] (EE) Screen 0 deleted because of no matching config section.
[   151.692] (II) UnloadModule: "amdgpu"
[   151.692] (EE) Screen 0 deleted because of no matching config section.
[   151.692] (II) UnloadModule: "amdgpu"
[   151.692] (EE) Device(s) detected, but none match those in the config file.
[   151.692] (EE) 
Fatal server error:
[   151.692] (EE) no screens found(EE) 
[   151.692] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   151.692] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   151.692] (EE) 
[   151.693] (EE) Server terminated with error (1). Closing log file.