Hello,
I upgraded an existing 8.1 NetBSD with the
NetBSD-9.0_RC2-amd64-uefi-install.img from an USB stick.
But sysinst reports size zero for the existing partition
and I was neither able to use the install nor the upgrade
menu item. Also the partitioning tool from the Utility menu
is not able to handle the partition.
It was possible to upgrade, following the appropriate parts from
http://blog.triaxx.org/index.php?post/2017/06/02/GPT-Installation-of-NetBSD-7
and to untar the sets on the commandline or with simple scripts.
The good news for 9.0_RC2:
suspend works, resume works mostly (resume did not work at all in 8.1).
Only my USB keypoard and mouse are lost, but ssh works and
I could switch screens from X to console terminals and back.
I was not able to find a way to reactivate keyboard and mouse,
that is, where I am stuck now.
Does anyone have ideas, how to activate the keyboard again?
Best regards, Bernward.
----
Details:
Booting is OK, I chose a shell to check the existing 8.1 installation
on dk3(gpt index 4):
# gpt show -i 4 wd0
Details for index 4:
Start: 76564480 (37G)
Size: 49152000 (23G)
Type: ffs (49f48d5a-b10e-11dc-b99b-0019d1879648)
GUID: 1133f43f-e1a6-4e7f-917e-204928a66243
Label: NetBSD
Attributes: biosboot
#
# dkctl dk3 getwedgeinfo
dk3 at wd0: NetBSD
dk3: 49152000 blocks at 76564480, type: ffs
After starting sysinst, the install path as well as the upgrade path
show me a menu to choose the partiton:
On which disk do you want to install NetBSD?
Available disks
a: wd0 (466G)
b: sd0 (3.8G)
c: EFI boot partition (dk0@wd0)
d: Linux root partition (dk1@wd0)
e: Linux SWAP partition (dk2@wd0)
f: NetBSD (dk3@wd0)
g: frei (dk4@wd0)
h: OpenBSD (dk5@wd0)
i: NetBSDswap (dk6@wd0)
j: Home (dk7@wd0)
k: FreeBSD EFI (dk8@wd0)
l: FreeBSD (dk9@wd0)
m: FreeBSD swap (dk10@wd0)
n: EFI system (dk11@sd0)
o: Extended partitioning
x: Exit
But when I choose f: NetBSD (dk3@wd0), I get the message:
The NetBSD (or free) part of your disk (dk3) is 0B.
A full installation requires at least 127M without X and at least 427M if the X sets are included.
I append a typescript of the session with all details and dmesg.boot
Details for the resume problem:
It is possible to switch screens over ssh with
wsconscfg -s {1-5}
Some diagnostic:
# /sbin/drvctl -lt xhci0
usb0
uhub0
usb1
uhub1
ubt0
uhidev0
ukbd0
wskbd0
uhidev1
uhid0
uhidev2
ums0
wsmouse0
# /sbin/drvctl -p wskbd0
Properties for device `wskbd0':
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd";>
<plist version="1.0">
<dict>
<key>device-driver</key>
<string>wskbd</string>
<key>device-parent</key>
<string>ukbd0</string>
<key>device-unit</key>
<integer>0x0</integer>
</dict>
</plist>
----
Attachment:
install.typescript
Description: Binary data
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.0_RC2 (GENERIC) #0: Fri Jan 31 12:19:17 UTC 2020
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 3989 MB
avail memory = 3848 MB
cpu_rng: RDRAND
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa b9aa9f18
GIGABYTE GB-BXBT-2807 (1.x)
mainbus0 (root)
ACPI: RSDP 0x00000000B96CA000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000B96CA080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000B96D5508 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20190405/tbfadt-642)
ACPI: DSDT 0x00000000B96CA188 00B380 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000B97F4F80 000040
ACPI: APIC 0x00000000B96D5618 000068 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000B96D5680 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000B96D56C8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: LPIT 0x00000000B96D5708 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D)
ACPI: HPET 0x00000000B96D5810 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000B96D5848 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 0x00000000B96D5FB0 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 0x00000000B96D6240 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
ACPI: UEFI 0x00000000B96D63C0 000042 (v01 ALASKA A M I 00000000 00000000)
ACPI: BGRT 0x00000000B96D6408 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 87 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Celeron(R) CPU N2807 @ 1.58GHz, id 0x30678
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Celeron(R) CPU N2807 @ 1.58GHz, id 0x30678
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,00010013>
acpi0: autoconfiguration error: invalid PCI address for D01A
acpi0: autoconfiguration error: invalid PCI address for D01B
acpi0: autoconfiguration error: invalid PCI address for D01C
acpi0: autoconfiguration error: invalid PCI address for D01E
acpi0: autoconfiguration error: invalid PCI address for D01D
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFDE49DBBC0008 000506 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFDE49A4267008 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFDE49A4239048 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFDE49A41ADA58 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: autoconfiguration error: unable to evaluate _GPE: AE_NOT_FOUND
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout8 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout9 at acpivga0 (ISP0, 0x0f38): ACPI Display Output Device
acpivga0: autoconfiguration error: unknown output device acpiout0
acpivga0: autoconfiguration error: unknown output device acpiout1
acpivga0: autoconfiguration error: unknown output device acpiout2
acpivga0: autoconfiguration error: unknown output device acpiout3
acpivga0: autoconfiguration error: unknown output device acpiout4
acpivga0: autoconfiguration error: unknown output device acpiout5
acpivga0: autoconfiguration error: unknown output device acpiout6
acpivga0: autoconfiguration error: unknown output device acpiout7
acpivga0: autoconfiguration error: unknown output device acpiout9
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout8): Unknown Output Device, head 0
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
SIO1 (PNP0C02) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
ADMA (DMA0F28) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
PEPD (INT3396) at acpi0 not configured
BTH0 (BCM2E1A) at acpi0 not configured
GPS0 (BCM4752) at acpi0 not configured
CAM0 (INTCF0B) at acpi0 not configured
CAM1 (INTCF1A) at acpi0 not configured
STRA (INTCF1C) at acpi0 not configured
SHUB (SMO91D0) at acpi0 not configured
TCS2 (ATML1000) at acpi0 not configured
FWUP (ATML2000) at acpi0 not configured
MBID (INT33BD) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpitz0 at acpi0 (TZ01): cpu0 cpu1
acpitz0: active cooling level 0: 50.0C
acpitz0: levels: critical 90.0 C, hot 85.0 C, passive 85.0 C
ACPI: Enabled 5 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0f00 (rev. 0x0e)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0f31 (rev. 0x0e)
ahcisata0 at pci0 dev 19 function 0: vendor 8086 product 0f23 (rev. 0x0e)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xc720ff01<PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A>
ahcisata0: interrupting at msi0 vec 0
atabus0 at ahcisata0 channel 0
xhci0 at pci0 dev 20 function 0: vendor 8086 product 0f35 (rev. 0x0e)
xhci0: interrupting at msi1 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 0f18 (miscellaneous crypto, revision 0x0e) at pci0 dev 26 function 0 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi2 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0283
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: 2ch/0ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for playback
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdafg1 at hdaudio0: vendor 8086 product 2882
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 0f48 (rev. 0x0e)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 0f4a (rev. 0x0e)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 10ec product b723 (miscellaneous network) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2: vendor 8086 product 0f4c (rev. 0x0e)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
re0: interrupting at msix3 vec 0
re0: Ethernet address fc:aa:14:ad:e2:5e
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 3: vendor 8086 product 0f4e (rev. 0x0e)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
pcib0 at pci0 dev 31 function 0: vendor 8086 product 0f1c (rev. 0x0e)
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 0f12 (rev. 0x0e)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 500 us, pow 10 mW
acpicpu0: C3: FFH, lat 1500 us, pow 10 mW
acpicpu0: P0: FFH, lat 10 us, pow 2000 mW, 1578 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 2000 mW, 1577 MHz
acpicpu0: P2: FFH, lat 10 us, pow 1892 mW, 1494 MHz
acpicpu0: P3: FFH, lat 10 us, pow 1784 mW, 1411 MHz
acpicpu0: P4: FFH, lat 10 us, pow 1676 mW, 1328 MHz
acpicpu0: P5: FFH, lat 10 us, pow 1569 mW, 1245 MHz
acpicpu0: P6: FFH, lat 10 us, pow 1461 mW, 1162 MHz
acpicpu0: P7: FFH, lat 10 us, pow 1353 mW, 1079 MHz
acpicpu0: P8: FFH, lat 10 us, pow 1246 mW, 996 MHz
acpicpu0: P9: FFH, lat 10 us, pow 1138 mW, 913 MHz
acpicpu0: P10: FFH, lat 10 us, pow 1030 mW, 830 MHz
acpicpu0: P11: FFH, lat 10 us, pow 923 mW, 747 MHz
acpicpu0: P12: FFH, lat 10 us, pow 815 mW, 664 MHz
acpicpu0: P13: FFH, lat 10 us, pow 707 mW, 581 MHz
acpicpu0: P14: FFH, lat 10 us, pow 600 mW, 498 MHz
acpicpu0: T0: FFH, lat 1 us, pow 600 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 525 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 450 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 375 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 300 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 225 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 150 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 75 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1583502940 Hz quality 3000
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 1 port with 1 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 6 ports with 6 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 0: device present, speed: 3.0Gb/s
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: General (0x90c) USB Flash Disk (0x1000), rev 2.00/11.00, addr 1
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
wd0 at atabus0 drive 0
wd0: <HGST HTS545050A7E680>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: GPT GUID: dd535344-436c-4513-b843-219f731159c8
dk0 at wd0: "EFI boot partition", 202753 blocks at 2048, type: msdos
dk1 at wd0: "Linux root partition", 66381824 blocks at 206848, type: ext2fs
dk2 at wd0: "Linux SWAP partition", 9975808 blocks at 66588672, type: <unknown>
dk3 at wd0: "NetBSD", 49152000 blocks at 76564480, type: ffs
dk4 at wd0: "frei", 232783872 blocks at 679813120, type: ext2fs
dk5 at wd0: "OpenBSD", 65536000 blocks at 614277120, type: <unknown>
dk6 at wd0: "NetBSDswap", 8388608 blocks at 125716480, type: swap
dk7 at wd0: "Home", 480172032 blocks at 134105088, type: ext2fs
dk8 at wd0: "FreeBSD EFI", 409600 blocks at 912596992, type: msdos
dk9 at wd0: "FreeBSD", 60407800 blocks at 913006592, type: ffs
dk10 at wd0: "FreeBSD swap", 3209216 blocks at 973414392, type: swap
sd0 at scsibus0 target 0 lun 0: <General, USB Flash Disk, 1100> disk removable
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
sd0: 3870 MB, 7872 cyl, 16 head, 63 sec, 512 bytes/sect x 7925760 sectors
sd0: GPT GUID: c1f0c1a5-7a9b-4bac-944b-3d457c09a72d
dk11 at sd0: "EFI system", 262144 blocks at 2048, type: msdos
dk12 at sd0: "914efdcb-c90a-4f3d-9909-3220489408a4", 2908160 blocks at 264192, type: ffs
ubt0 at uhub1 port 2
ubt0: Realtek (0x13d3) Bluetooth Radio (0x3410), rev 2.10/2.00, addr 2
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: vendor 046a (0x46a) product 010d (0x10d), rev 2.00/1.00, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard
uhidev1 at uhub1 port 3 configuration 1 interface 1
uhidev1: vendor 046a (0x46a) product 010d (0x10d), rev 2.00/1.00, addr 3, iclass 3/0
uhid0 at uhidev1: input=2, output=0, feature=0
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 4, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
WARNING: 15 errors while detecting hardware; check system log.
boot device: sd0
root on dk12 dumps on dk6
root file system type: ffs
kern.module.path=/stand/amd64/9.0/modules
kern info: [drm] Memory usable by graphics device = 2048M
WARNING: clock gained 6 days
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffffa98066d72000, size 1280x1024, depth 32, stride 5120
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsmouse0: detached
ums0: detached
uhidev2: detached
uhidev2: at uhub1 port 4 (addr 4) disconnected
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 5, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev2: detached
uhidev2: at uhub1 port 4 (addr 5) disconnected
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 6, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev2: detached
uhidev2: at uhub1 port 4 (addr 6) disconnected
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 7, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev2: detached
uhidev2: at uhub1 port 4 (addr 7) disconnected
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 8, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev2: detached
uhidev2: at uhub1 port 4 (addr 8) disconnected
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 9, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev2: detached
uhidev2: at uhub1 port 4 (addr 9) disconnected
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 10, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev2: detached
uhidev2: at uhub1 port 4 (addr 10) disconnected
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 11, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev2: detached
uhidev2: at uhub1 port 4 (addr 11) disconnected
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 12, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev2: detached
uhidev2: at uhub1 port 4 (addr 12) disconnected
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 13, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev2: detached
uhidev2: at uhub1 port 4 (addr 13) disconnected
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 14, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev2: detached
uhidev2: at uhub1 port 4 (addr 14) disconnected
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 15, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
wsmouse0: detached
ums0: detached
uhidev2: detached
uhidev2: at uhub1 port 4 (addr 15) disconnected
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 16, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
syncing disks... 1 done
unmounted /dev/dk3 on /targetroot type ffs
unmounted tmpfs on /tmp type tmpfs
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.0_RC2 (GENERIC) #0: Fri Jan 31 12:19:17 UTC 2020
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 3989 MB
avail memory = 3848 MB
cpu_rng: RDRAND
rnd: seeded with 256 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa b9aa9f18
GIGABYTE GB-BXBT-2807 (1.x)
mainbus0 (root)
ACPI: RSDP 0x00000000B96CA000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000B96CA080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000B96D5508 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20190405/tbfadt-642)
ACPI: DSDT 0x00000000B96CA188 00B380 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000B97F4F80 000040
ACPI: APIC 0x00000000B96D5618 000068 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000B96D5680 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000B96D56C8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: LPIT 0x00000000B96D5708 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D)
ACPI: HPET 0x00000000B96D5810 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000B96D5848 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 0x00000000B96D5FB0 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 0x00000000B96D6240 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
ACPI: UEFI 0x00000000B96D63C0 000042 (v01 ALASKA A M I 00000000 00000000)
ACPI: BGRT 0x00000000B96D6408 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 87 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Celeron(R) CPU N2807 @ 1.58GHz, id 0x30678
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Celeron(R) CPU N2807 @ 1.58GHz, id 0x30678
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20190405
acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,00010013>
acpi0: autoconfiguration error: invalid PCI address for D01A
acpi0: autoconfiguration error: invalid PCI address for D01B
acpi0: autoconfiguration error: invalid PCI address for D01C
acpi0: autoconfiguration error: invalid PCI address for D01E
acpi0: autoconfiguration error: invalid PCI address for D01D
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFC1046D5C0008 000506 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFC10435C67008 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFC10435C39048 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFC10435BADA58 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: autoconfiguration error: unable to evaluate _GPE: AE_NOT_FOUND
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout8 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout9 at acpivga0 (ISP0, 0x0f38): ACPI Display Output Device
acpivga0: autoconfiguration error: unknown output device acpiout0
acpivga0: autoconfiguration error: unknown output device acpiout1
acpivga0: autoconfiguration error: unknown output device acpiout2
acpivga0: autoconfiguration error: unknown output device acpiout3
acpivga0: autoconfiguration error: unknown output device acpiout4
acpivga0: autoconfiguration error: unknown output device acpiout5
acpivga0: autoconfiguration error: unknown output device acpiout6
acpivga0: autoconfiguration error: unknown output device acpiout7
acpivga0: autoconfiguration error: unknown output device acpiout9
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout8): Unknown Output Device, head 0
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
SIO1 (PNP0C02) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
ADMA (DMA0F28) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
PEPD (INT3396) at acpi0 not configured
BTH0 (BCM2E1A) at acpi0 not configured
GPS0 (BCM4752) at acpi0 not configured
CAM0 (INTCF0B) at acpi0 not configured
CAM1 (INTCF1A) at acpi0 not configured
STRA (INTCF1C) at acpi0 not configured
SHUB (SMO91D0) at acpi0 not configured
TCS2 (ATML1000) at acpi0 not configured
FWUP (ATML2000) at acpi0 not configured
MBID (INT33BD) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpitz0 at acpi0 (TZ01): cpu0 cpu1
acpitz0: active cooling level 0: 50.0C
acpitz0: levels: critical 90.0 C, hot 85.0 C, passive 85.0 C
ACPI: Enabled 5 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0f00 (rev. 0x0e)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0f31 (rev. 0x0e)
ahcisata0 at pci0 dev 19 function 0: vendor 8086 product 0f23 (rev. 0x0e)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xc720ff01<PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A>
ahcisata0: interrupting at msi0 vec 0
atabus0 at ahcisata0 channel 0
xhci0 at pci0 dev 20 function 0: vendor 8086 product 0f35 (rev. 0x0e)
xhci0: interrupting at msi1 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product 0f18 (miscellaneous crypto, revision 0x0e) at pci0 dev 26 function 0 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi2 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0283
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: 2ch/0ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for playback
audio0: slinear_le:16 2ch 48000Hz, blk 4ms for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdafg1 at hdaudio0: vendor 8086 product 2882
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 0f48 (rev. 0x0e)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 0f4a (rev. 0x0e)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 10ec product b723 (miscellaneous network) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2: vendor 8086 product 0f4c (rev. 0x0e)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
re0: interrupting at msix3 vec 0
re0: Ethernet address fc:aa:14:ad:e2:5e
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 3: vendor 8086 product 0f4e (rev. 0x0e)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
pcib0 at pci0 dev 31 function 0: vendor 8086 product 0f1c (rev. 0x0e)
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 0f12 (rev. 0x0e)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 500 us, pow 10 mW
acpicpu0: C3: FFH, lat 1500 us, pow 10 mW
acpicpu0: P0: FFH, lat 10 us, pow 2000 mW, 1578 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 2000 mW, 1577 MHz
acpicpu0: P2: FFH, lat 10 us, pow 1892 mW, 1494 MHz
acpicpu0: P3: FFH, lat 10 us, pow 1784 mW, 1411 MHz
acpicpu0: P4: FFH, lat 10 us, pow 1676 mW, 1328 MHz
acpicpu0: P5: FFH, lat 10 us, pow 1569 mW, 1245 MHz
acpicpu0: P6: FFH, lat 10 us, pow 1461 mW, 1162 MHz
acpicpu0: P7: FFH, lat 10 us, pow 1353 mW, 1079 MHz
acpicpu0: P8: FFH, lat 10 us, pow 1246 mW, 996 MHz
acpicpu0: P9: FFH, lat 10 us, pow 1138 mW, 913 MHz
acpicpu0: P10: FFH, lat 10 us, pow 1030 mW, 830 MHz
acpicpu0: P11: FFH, lat 10 us, pow 923 mW, 747 MHz
acpicpu0: P12: FFH, lat 10 us, pow 815 mW, 664 MHz
acpicpu0: P13: FFH, lat 10 us, pow 707 mW, 581 MHz
acpicpu0: P14: FFH, lat 10 us, pow 600 mW, 498 MHz
acpicpu0: T0: FFH, lat 1 us, pow 600 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 525 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 450 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 375 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 300 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 225 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 150 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 75 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1583509780 Hz quality 3000
uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 1 port with 1 removable, self powered
uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 6 ports with 6 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 0: device present, speed: 3.0Gb/s
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: General (0x90c) USB Flash Disk (0x1000), rev 2.00/11.00, addr 1
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
wd0 at atabus0 drive 0
wd0: <HGST HTS545050A7E680>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
sd0 at scsibus0 target 0 lun 0: <General, USB Flash Disk, 1100> disk removable
wd0: GPT GUID: dd535344-436c-4513-b843-219f731159c8
dk0 at wd0: "EFI boot partition", 202753 blocks at 2048, type: msdos
dk1 at wd0: "Linux root partition", 66381824 blocks at 206848, type: ext2fs
dk2 at wd0: "Linux SWAP partition", 9975808 blocks at 66588672, type: <unknown>
dk3 at wd0: "NetBSD", 49152000 blocks at 76564480, type: ffs
dk4 at wd0: "frei", 232783872 blocks at 679813120, type: ext2fs
dk5 at wd0: "OpenBSD", 65536000 blocks at 614277120, type: <unknown>
dk6 at wd0: "NetBSDswap", 8388608 blocks at 125716480, type: swap
dk7 at wd0: "Home", 480172032 blocks at 134105088, type: ext2fs
dk8 at wd0: "FreeBSD EFI", 409600 blocks at 912596992, type: msdos
dk9 at wd0: "FreeBSD", 60407800 blocks at 913006592, type: ffs
dk10 at wd0: "FreeBSD swap", 3209216 blocks at 973414392, type: swap
sd0: 3870 MB, 7872 cyl, 16 head, 63 sec, 512 bytes/sect x 7925760 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
sd0: GPT GUID: c1f0c1a5-7a9b-4bac-944b-3d457c09a72d
dk11 at sd0: "EFI system", 262144 blocks at 2048, type: msdos
dk12 at sd0: "914efdcb-c90a-4f3d-9909-3220489408a4", 2908160 blocks at 264192, type: ffs
ubt0 at uhub1 port 2
ubt0: Realtek (0x13d3) Bluetooth Radio (0x3410), rev 2.10/2.00, addr 2
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: vendor 046a (0x46a) product 010d (0x10d), rev 2.00/1.00, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard
uhidev1 at uhub1 port 3 configuration 1 interface 1
uhidev1: vendor 046a (0x46a) product 010d (0x10d), rev 2.00/1.00, addr 3, iclass 3/0
uhid0 at uhidev1: input=2, output=0, feature=0
uhidev2 at uhub1 port 4 configuration 1 interface 0
uhidev2: Logitech (0x46d) USB Optical Mouse (0xc077), rev 2.00/72.00, addr 4, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
WARNING: 15 errors while detecting hardware; check system log.
boot device: wd0
root on dk3 dumps on dk6
root file system type: ffs
kern.module.path=/stand/amd64/9.0/modules
kern info: [drm] Memory usable by graphics device = 2048M
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffffc28066d72000, size 1280x1024, depth 32, stride 5120
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)