NetBSD-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: GeForce - double crash with nouveau (boot and X11)
As a reference,
here is the dmesg output of NetBSD 9.1 with nouveau disabled.
2 errors are about cardus, the Laptop has only one, perhaps the other is
routed to the SD card reader? Inconvenient to loose...
acpi wmi I don't know what it is, howver on the videocard, it is
interesting:
[ 1.014251] acpivga0 at acpi0 (VGA): ACPI Display Adapter
[ 1.014251] acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output
Device
[ 1.014251] acpiout1 at acpivga0 (LCD, 0x0118): ACPI Display Output
Device
[ 1.014251] acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output
Device
[ 1.014251] acpiout3 at acpivga0 (DVI, 0x0120): ACPI Display Output
Device
[ 1.014251] acpivga0: connected output devices:
[ 1.014251] acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0,
bios detect
[ 1.014251] acpivga0: 0x0200 (acpiout2): TV, head 0, bios detect
[ 1.014251] acpivga0: 0x0118 (acpiout1): Unknown Output Device,
head 0, bios detect
[ 1.014251] acpivga0: 0x0120 (acpiout3): Unknown Output Device,
head 0, bios detect
0: CRT - External Monitor
1: LCD - I suppose it is the LVDS display? apparently Unknown, this
could be the issue
2: TV0 - TV : maybe card feature, the Laptop has no composite, s-videoport
3: DVI - unknown, not configured either, but the laptop has no DVI or
HDMI port, so I supposed it is not routed out
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All
rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All
rights reserved.
[ 1.000000] NetBSD 9.1 (GENERIC) #0: Sun Oct 18 19:24:30 UTC 2020
[ 1.000000]
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/i386/compile/GENERIC
[ 1.000000] total memory = 3070 MB
[ 1.000000] avail memory = 2999 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.000000] userconf: configure system autoconfiguration:
[ 1.000000] uc> disble nouveau
[ 1.000000] Unknown command, try help
[ 1.000000] uc> disable nouveau
[ 1.000000] [ 452.000000] nouveau* disabled
[ 1.000000] uc> quit
[ 1.000000] Continuing...
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz
quality 100
[ 1.000003] Acer Aspire 9410 (0100 )
[ 1.000003] mainbus0 (root)
[ 1.000003] ACPI: RSDP 0x00000000000F5AA0 000014 (v00 PTLTD )
[ 1.000003] ACPI: RSDT 0x00000000BFE951F7 00004C (v01 PTLTD
RSDT 06040000 LTP 00000000)
[ 1.000003] ACPI: FACP 0x00000000BFE9DDEE 000074 (v01 INTEL
CALISTGA 06040000 LOHR 0000005A)
[ 1.000003] ACPI: DSDT 0x00000000BFE96978 007476 (v01 INTEL
CALISTGA 06040000 MSFT 0100000E)
[ 1.000003] ACPI: FACS 0x00000000BFE9EFC0 000040
[ 1.000003] ACPI: APIC 0x00000000BFE9DE62 000068 (v01 INTEL
CALISTGA 06040000 LOHR 0000005A)
[ 1.000003] ACPI: HPET 0x00000000BFE9DECA 000038 (v01 INTEL
CALISTGA 06040000 LOHR 0000005A)
[ 1.000003] ACPI: MCFG 0x00000000BFE9DF02 00003C (v01 INTEL
CALISTGA 06040000 LOHR 0000005A)
[ 1.000003] ACPI: TCPA 0x00000000BFE9DF3E 000032 (v01 PTLTD
CALISTGA 06040000 PTL 00000001)
[ 1.000003] ACPI: APIC 0x00000000BFE9DF70 000068 (v01 PTLTD ?
APIC 06040000 LTP 00000000)
[ 1.000003] ACPI: BOOT 0x00000000BFE9DFD8 000028 (v01 PTLTD
$SBFTBL$ 06040000 LTP 00000001)
[ 1.000003] ACPI: SSDT 0x00000000BFE96329 00064F (v01 SataRe
SataPri 00001000 INTL 20050624)
[ 1.000003] ACPI: SSDT 0x00000000BFE95C97 000692 (v01 SataRe
SataSec 00001000 INTL 20050624)
[ 1.000003] ACPI: SSDT 0x00000000BFE95243 0004F6 (v01 PmRef
CpuPm 00003000 INTL 20050624)
[ 1.000003] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 1.000003] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20,
24 pins
[ 1.000003] ioapic1 at mainbus0 apid 2: pa
0xfec18000autoconfiguration error: : failed to read version/size
[ 1.000003] cpu0 at mainbus0 apid 0
[ 1.000003] cpu0: Genuine Intel(R) CPU T2250 @ 1.73GHz,
id 0x6e8
[ 1.000003] cpu0: package 0, core 0, smt 0
[ 1.000003] cpu1 at mainbus0 apid 1
[ 1.000003] cpu1: Genuine Intel(R) CPU T2250 @ 1.73GHz,
id 0x6e8
[ 1.000003] cpu1: package 0, core 1, smt 0
[ 1.000003] acpi0 at mainbus0: Intel ACPICA 20190405
[ 1.000003] acpi0: X/RSDT: OemId <PTLTD , RSDT ,06040000>, AslId <
LTP,00000000>
[ 1.000003] acpi0: MCFG: segment 0, bus 0-255, address
0x00000000e0000000
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0x00000000C4919404 0001EA (v01 PmRef
Cpu0Ist 00003000 INTL 20050624)
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0x00000000C47D7C44 000266 (v01 PmRef
Cpu0Cst 00003001 INTL 20050624)
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0x00000000C4910E8C 000089 (v01 PmRef
Cpu1Ist 00003000 INTL 20050624)
[ 1.000003] ACPI: Dynamic OEM Table Load:
[ 1.000003] ACPI: SSDT 0x00000000C4910F2C 000085 (v01 PmRef
Cpu1Cst 00003000 INTL 20050624)
[ 1.000003] acpi0: SCI interrupting at int 9
[ 1.000003] acpi0: fixed power button present
[ 1.000003] timecounter: Timecounter "ACPI-Safe" frequency 3579545
Hz quality 900
[ 1.013936] hpet0 at acpi0: high precision event timer (mem
0xfed00000-0xfed00400)
[ 1.013936] timecounter: Timecounter "hpet0" frequency 14318180 Hz
quality 2000
[ 1.014251] acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
[ 1.014251] acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
[ 1.014251] acpiwmibus at acpiwmi0 not configured
[ 1.014251] acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
[ 1.014251] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
[ 1.014251] PDRC (PNP0C02) at acpi0 not configured
[ 1.014251] acpivga0 at acpi0 (VGA): ACPI Display Adapter
[ 1.014251] acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output
Device
[ 1.014251] acpiout1 at acpivga0 (LCD, 0x0118): ACPI Display Output
Device
[ 1.014251] acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output
Device
[ 1.014251] acpiout3 at acpivga0 (DVI, 0x0120): ACPI Display Output
Device
[ 1.014251] acpivga0: connected output devices:
[ 1.014251] acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0,
bios detect
[ 1.014251] acpivga0: 0x0200 (acpiout2): TV, head 0, bios detect
[ 1.014251] acpivga0: 0x0118 (acpiout1): Unknown Output Device,
head 0, bios detect
[ 1.014251] acpivga0: 0x0120 (acpiout3): Unknown Output Device,
head 0, bios detect
[ 1.014251] acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
[ 1.014251] acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
[ 1.014251] FWHD (INT0800) at acpi0 not configured
[ 1.014251] MATH (PNP0C04) at acpi0 not configured
[ 1.014251] LDRC (PNP0C02) at acpi0 not configured
[ 1.014251] CDRC (PNP0C02) at acpi0 not configured
[ 1.014251] attimer1 at acpi0 (TIMR, PNP0100): io
0x40-0x43,0x50-0x53 irq 0
[ 1.014251] pckbc1 at acpi0 (KBD0, PNP0303) (kbd port): io 0x60,0x64
irq 1
[ 1.014251] pckbc2 at acpi0 (PS2M, SYN0302) (aux port): irq 12
[ 1.014251] acpitz0 at acpi0 (TZS0)
[ 1.014251] acpitz0: levels: critical 98.0 C, passive cooling
[ 1.014251] acpitz1 at acpi0 (TZS1)
[ 1.014251] acpitz1: levels: critical 111.0 C, passive cooling
[ 1.014251] apm0 at acpi0: Power Management spec V1.2
[ 1.014251] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 1.014251] pckbd0 at pckbc1 (kbd slot)
[ 1.014251] pckbc1: using irq 1 for kbd slot
[ 1.014251] wskbd0 at pckbd0: console keyboard
[ 1.014251] pms0 at pckbc1 (aux slot)
[ 1.014251] pms0: Synaptics touchpad version 6.2
[ 1.014251] pms0: Up/down buttons, Palm detect, Two button click
pad, Multi-finger
[ 1.014251] pckbc1: using irq 12 for aux slot
[ 1.014251] wsmouse0 at pms0 mux 0
[ 1.014251] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.014251] pci0: i/o space, memory space enabled, rd/line, rd/mult,
wr/inv ok
[ 1.014251] pchb0 at pci0 dev 0 function 0: vendor 8086 product 27a0
(rev. 0x03)
[ 1.014251] agp0 at pchb0autoconfiguration error: : can't find
internal VGA config space
[ 1.014251] ppb0 at pci0 dev 1 function 0: vendor 8086 product 27a1
(rev. 0x03)
[ 1.014251] ppb0: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x16 @ 2.5GT/s
[ 1.014251] pci1 at ppb0 bus 1
[ 1.014251] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.014251] vga0 at pci1 dev 0 function 0: vendor 10de product 01d7
(rev. 0xa1)
[ 1.014251] vga0: autoconfiguration error: WARNING: ignoring 64-bit
BAR @ 0x14
[ 1.014251] vga0: autoconfiguration error: WARNING: ignoring 64-bit
BAR @ 0x1c
[ 1.014251] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100
emulation), using wskbd0
[ 1.014251] wsmux1: connecting to wsdisplay0
[ 1.014251] drm at vga0 not configured
[ 1.014251] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
[ 1.014251] hdaudio0: interrupting at msi0 vec 0
[ 1.014251] hdafg0 at hdaudio0: vendor 10ec product 0883
[ 1.014251] hdafg0: DAC00 2ch: Speaker [Jack]
[ 1.014251] hdafg0: DIG01 2ch: SPDIF Out [Jack]
[ 1.014251] hdafg0: ADC02 2ch: Line In [Jack] [Built-In], Mic In [Jack]
[ 1.014251] hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16
PCM20 PCM24 AC3
[ 1.014251] audio0 at hdafg0: playback, capture, full duplex,
independent
[ 1.014251] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for playback
[ 1.014251] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms)
for recording
[ 1.014251] hdvsmfg at hdaudio0 not configured
[ 1.014251] ppb1 at pci0 dev 28 function 0: vendor 8086 product 27d0
(rev. 0x02)
[ 1.014251] ppb1: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1.014251] pci2 at ppb1 bus 2
[ 1.014251] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.014251] re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe
Gigabit Ethernet (rev. 0x01)
[ 1.014251] re0: interrupting at msi1 vec 0
[ 1.014251] re0: Ethernet address 00:0a:e4:fe:9c:27
[ 1.014251] re0: using 256 tx descriptors
[ 1.014251] rgephy0 at re0 phy 7: RTL8211B 1000BASE-T media interface
[ 1.014251] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT, 1000baseT-FDX, auto
[ 1.014251] ppb2 at pci0 dev 28 function 1: vendor 8086 product 27d2
(rev. 0x02)
[ 1.014251] ppb2: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1.014251] pci3 at ppb2 bus 3
[ 1.014251] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.014251] ppb3 at pci0 dev 28 function 2: vendor 8086 product 27d4
(rev. 0x02)
[ 1.014251] ppb3: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1.014251] pci4 at ppb3 bus 5
[ 1.014251] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.014251] wpi0 at pci4 dev 0 function 0: vendor 8086 product 4222
(rev. 0x02)
[ 1.014251] wpi0: interrupting at msi2 vec 0
[ 1.014251] wpi0: MoW2, address 00:13:02:21:b0:e3
[ 1.014251] wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps
48Mbps 54Mbps
[ 1.014251] wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 1.014251] wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps
12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 1.014251] ppb4 at pci0 dev 28 function 3: vendor 8086 product 27d6
(rev. 0x02)
[ 1.014251] ppb4: PCI Express capability version 1 <Root Port of
PCI-E Root Complex> x1 @ 2.5GT/s
[ 1.014251] pci5 at ppb4 bus 7
[ 1.014251] pci5: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.014251] uhci0 at pci0 dev 29 function 0: vendor 8086 product
27c8 (rev. 0x02)
[ 1.014251] uhci0: interrupting at ioapic0 pin 23
[ 1.014251] usb0 at uhci0: USB revision 1.0
[ 1.014251] uhci1 at pci0 dev 29 function 1: vendor 8086 product
27c9 (rev. 0x02)
[ 1.014251] uhci1: interrupting at ioapic0 pin 19
[ 1.014251] usb1 at uhci1: USB revision 1.0
[ 1.014251] uhci2 at pci0 dev 29 function 2: vendor 8086 product
27ca (rev. 0x02)
[ 1.014251] uhci2: interrupting at ioapic0 pin 18
[ 1.014251] usb2 at uhci2: USB revision 1.0
[ 1.014251] uhci3 at pci0 dev 29 function 3: vendor 8086 product
27cb (rev. 0x02)
[ 1.014251] uhci3: interrupting at ioapic0 pin 16
[ 1.014251] usb3 at uhci3: USB revision 1.0
[ 1.014251] ehci0 at pci0 dev 29 function 7: vendor 8086 product
27cc (rev. 0x02)
[ 1.014251] ehci0: interrupting at ioapic0 pin 23
[ 1.014251] ehci0: EHCI version 1.0
[ 1.014251] ehci0: 4 companion controllers, 2 ports each: uhci0
uhci1 uhci2 uhci3
[ 1.014251] usb4 at ehci0: USB revision 2.0
[ 1.014251] ppb5 at pci0 dev 30 function 0: vendor 8086 product 2448
(rev. 0xe2)
[ 1.014251] pci6 at ppb5 bus 10
[ 1.014251] pci6: i/o space, memory space enabled
[ 1.014251] cbb0 at pci6 dev 6 function 0: vendor 104c product 8039
(rev. 0x00)
[ 1.014251] vendor 104c product 803b (miscellaneous mass storage) at
pci6 dev 6 function 2 not configured
[ 1.014251] sdhc0 at pci6 dev 6 function 3: vendor 104c product 803c
(rev. 0x00)
[ 1.014251] sdhc0: interrupting at ioapic0 pin 22
[ 1.014251] sdhc0: SDHC 1.0, rev 137, PIO, 48000 kHz, 3.3V, 512 byte
blocks
[ 1.014251] sdmmc0 at sdhc0 slot 0
[ 1.014251] cbb0: autoconfiguration error: bad Vcc request.
sock_ctrl 0xffffff88, sock_status 0xffffffff
[ 1.014251] cbb0: autoconfiguration error: disabling socket
[ 1.014251] new status 0xffffffff
[ 1.014251] cbb0: cacheline 0x10 lattimer 0x40
[ 1.014251] cbb0: bhlc 0x824010
[ 1.014251] cbb0: autoconfiguration error: secondary bus number
uninitialized; try PCI_BUS_FIXUP
[ 1.014251] cbb0: interrupting at ioapic0 pin 22
[ 1.014251] cardslot0 at cbb0
[ 1.014251] pcmcia0 at cardslot0
[ 1.014251] ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product
27b9 (rev. 0x02)
[ 1.014251] timecounter: Timecounter "ichlpcib0" frequency 3579545
Hz quality 1000
[ 1.014251] ichlpcib0: 24-bit timer
[ 1.014251] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[ 1.014251] tco0: autoconfiguration error: TCO timer reboot disabled
by hardware; hope SMBIOS properly handles it.
[ 1.014251] tco0: Min/Max interval 1/367 seconds
[ 1.014251] piixide0 at pci0 dev 31 function 2: Intel 82801GBM/GHM
Serial ATA Controller (ICH7) (rev. 0x02)
[ 1.014251] piixide0: bus-master DMA support present
[ 1.014251] piixide0: primary channel wired to compatibility mode
[ 1.014251] piixide0: primary channel interrupting at ioapic0 pin 14
[ 1.014251] atabus0 at piixide0 channel 0
[ 1.014251] piixide0: secondary channel wired to compatibility mode
[ 1.014251] piixide0: secondary channel interrupting at ioapic0 pin 15
[ 1.014251] atabus1 at piixide0 channel 1
[ 1.014251] ichsmb0 at pci0 dev 31 function 3: vendor 8086 product
27da (rev. 0x02)
[ 1.014251] ichsmb0: interrupting at ioapic0 pin 19
[ 1.014251] iic0 at ichsmb0: I2C bus
[ 1.014251] isa0 at ichlpcib0
[ 1.014251] pcppi0 at isa0 port 0x61
[ 1.014251] midi0 at pcppi0: PC speaker
[ 1.014251] sysbeep0 at pcppi0
[ 1.014251] attimer1: attached to pcppi0
[ 1.014251] acpicpu0 at cpu0: ACPI CPU
[ 1.014251] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.014251] acpicpu0: C2: I/O, lat 1 us, pow 500 mW
[ 1.014251] acpicpu0: C3: I/O, lat 57 us, pow 100 mW
[ 1.014251] acpicpu0: P0: FFH, lat 10 us, pow 31000 mW, 1733 MHz
[ 1.014251] acpicpu0: P1: FFH, lat 10 us, pow 23000 mW, 1333 MHz
[ 1.014251] acpicpu0: P2: FFH, lat 10 us, pow 18000 mW, 1067 MHz
[ 1.014251] acpicpu0: P3: FFH, lat 10 us, pow 13000 mW, 800 MHz
[ 1.014251] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=85
[ 1.014251] acpicpu1 at cpu1: ACPI CPU
[ 1.014251] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=85
[ 1.014251] timecounter: Timecounter "clockinterrupt" frequency 100
Hz quality 0
[ 1.485483] IPsec: Initialized Security Association Processing.
[ 1.495603] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class
9/0, rev 1.00/1.00, addr 1
[ 1.495603] uhub0: 2 ports with 2 removable, self powered
[ 1.495603] uhub1 at usb1acpiacad0: AC adapter online.
[ 1.495603] : NetBSD (0000) UHCI root hub (0000), class 9/0, rev
1.00/1.00, addr 1
[ 1.495603] uhub1: 2 ports with 2 removable, self powered
[ 1.495603] uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class
9/0, rev 1.00/1.00, addr 1
[ 1.495603] uhub2: 2 ports with 2 removable, self powered
[ 1.495603] uhub3 at usb4: NetBSD (0000) EHCI root hub (0000), class
9/0, rev 2.00/1.00, addr 1
[ 1.495603] uhub3: 8 ports with 8 removable, self powered
[ 1.495603] uhub4 at usb3: NetBSD (0000) UHCI root hub (0000), class
9/0, rev 1.00/1.00, addr 1
[ 1.495603] uhub4: 2 ports with 2 removable, self powered
[ 1.575657] atapibus0 at atabus0: 2 targets
[ 1.585664] cd0 at atapibus0 drive 1: <Optiarc DVD RW AD-7560A,
30651250 2120461Q111, DS04> cdrom removable
[ 1.585664] cd0: 32-bit data port
[ 1.585664] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 2 (Ultra/33)
[ 1.585664] wd0 at atabus0 drive 0
[ 1.585664] wd0: <Hitachi HTS541612J9AT00>
[ 1.585664] wd0: drive supports 16-sector PIO transfers, LBA48
addressing
[ 1.585664] wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect
x 234441648 sectors
[ 2.075994] wd0: 32-bit data port
[ 2.075994] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA
mode 5 (Ultra/100), WRITE DMA FUA
[ 2.075994] wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5
(Ultra/100) (using DMA), WRITE DMA FUA EXT
[ 2.075994] cd0(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2
(Ultra/33) (using DMA)
[ 3.787148] ugen0 at uhub3 port 7
[ 3.797156] ugen0: OEM (0x46d) Camera (0x892), rev 2.00/1.00, addr 2
[ 11.992683] WARNING: 8 errors while detecting hardware; check system
log.
[ 11.992683] boot device: wd0
[ 11.992683] root on wd0a dumps on wd0b
[ 12.032710] root file system type: ffs
[ 12.032710] kern.module.path=/stand/i386/9.1/modules
[ 12.032710] WARNING: clock gained 5 days
[ 26.292330] wsdisplay0: screen 1 added (80x25, vt100 emulation)
[ 26.292330] wsdisplay0: screen 2 added (80x25, vt100 emulation)
[ 26.292330] wsdisplay0: screen 3 added (80x25, vt100 emulation)
[ 26.292330] wsdisplay0: screen 4 added (80x25, vt100 emulation)
[ 12863.512793] umass0 at uhub3 port 4 configuration 1 interface 0
[ 12863.512793] umass0: Super Top (0x14cd) USB 2.0 IDE DEVICE (0x6600),
rev 2.00/2.01, addr 3
[ 12863.512793] umass0: using SCSI over Bulk-Only
[ 12863.512793] scsibus0 at umass0: 2 targets, 1 lun per target
[ 12863.512793] sd0 at scsibus0 target 0 lun 0: <SAMSUNG, HM160HC,
0\0000> disk fixed
[ 12863.522799] sd0: 149 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect
x 312581808 sectors
Home |
Main Index |
Thread Index |
Old Index