Re: reboot hangs at "uhid2 at uhidev9 report id 7 ..."

[Henry <nbsd4ever%gmail.com@localhost>]

Very sorry, that should have been "uhidev0" (not "9").  "uhidev0"
identifies itself as:
uhidev0 at uhub1 port 8 configuration 1 interface 0
uhidev0: eGalax Inc. (0xeef) eGalaxTouch EXC3000-0367-44.01.00
(0xc04d), rev 2.01/67.02, addr 3, iclass 3/1
uhidev0; 7 report ids
I guess that is the touchpad.

However, the problem, I think, is elsewhere.  After letting the
computer sit for two days with the power off, I powered it on, and the
system came up normally, and with a login prompt.  I could login as
"root" as expected.

It seems that rebooting (/sbin/shutdown -r) caused the problem
described in my original post.  When I do that, the system tries to
reboot, but hangs at the "uhid2 at uhidev0" line.

Additionally, "/sbin/shutdown -p" is not working.  The machine starts
to shut down, but I get the following:
acpibat0: workqueue busy: updates stopped
acpitz0: workqueue busy: updates stopped
core1temp0: workqueue busy: updates stopped
core2temp: workqueue busy: updates stopped
The system hangs on that last line, and the computer never shuts down.

Do you think I should start a new thread on the port-amd64 list?

Thanks much,

Henry

2021年5月6日(木) 1:55 Rhialto <rhialto%falu.nl@localhost>:
>
> On Wed 05 May 2021 at 15:18:03 +0900, Henry wrote:
> > I recently installed 9.1 on a HP 15-au123cl.  The install seemed to go
> > fairly smoothly, and I was able to get the sets via ftp.
> >
> > The system kept booting into single user mode, but searching around I
> > finally figured out that I needed to edit /etc/rc.conf.  I thought I
> > had successfully changed to rc_configured=YES.
>
> The installer is also supposed to do that for you, so there must have
> been something weird there.
>
> > However, since then, whenever I try to boot the machine it hangs at:
> > [   4.7432765] uhid2 at uhidev9 report id 7: input=0, output=0 feature=256
> > (the numbers in brackets change; I have seen 7582388, 225.834047, 4.9366070).
> > There seems to be nothing else to do other than to hold down the power
> > button and shut the computer off.
>
> The "[   4.7432765]" is a timestamp so it's not so strange that it
> varies a bit.
>
> "uhid" is a "human interface device", usually a mouse or keyboard. There
> should be a line earlier in the output, starting with "uhidev9:" which
> tells you what sort of device it is. For example, for my mouse:
>
> uhidev0: Logitech (0x46d) USB Optical Mouse (0xc05a), rev 2.00/54.00, addr 1, iclass 3/1
>
> > What can I do to get the computer to boot?  (Or, did the computer
> > suddenly give out on me?)
>
> Hopefully that will tell you which device it is, and you can try to
> unplug it and then boot. Sometimes devices like iPhones present
> themselves as multiple devices to the computer. The high number (9) may
> be explained by something like that.
>
> > Henry
> -Olaf.
> --
> ___ Q: "What's an anagram of Banach-Tarski?"  -- Olaf "Rhialto" Seibert
> \X/ A: "Banach-Tarski Banach-Tarski."         -- rhialto at falu dot nl