Re: Install on Pi3

[James Cloos <cloos%jhcloos.com@localhost>]

thanks for all of the replies.

after posting i tried 9, and that failed to mount /.

so i switched from the 128G card to a 32G card, which finally worked.

i presume it must be the hw which doesn't work with the larger uSD cards
available now (the 128G cost only about $3 more than a 32G...).

i also gave the sunday's current a try on the 32G, but that still failed
to display anything or show up on the network.

since my goal was just to have a bsd on the lan to keep up with the
differences of configuring/maintaining bsd vs linux/gnu, i expect i'll
stick with 9 for now.

thanks again to all.

i may have more q's to come (that board is in a case which blocks the
gpio pins, but it does have a camera installed....)

-JimC
-- 
James Cloos <cloos%jhcloos.com@localhost>         OpenPGP: 0x997A9F17ED7DAEA6