Re: NetBSD 8/9 freeze

[Dima Veselov <kab00m%lich.phys.spbu.ru@localhost>]

On Thu, Mar 03, 2022 at 12:17:32PM +0000, Stephen Borrill wrote:
> On Wed, 2 Mar 2022, Dima Veselov wrote:
> > I have two similar NetBSD boxes, one is under 9_STABLE and the other is
> > old 8_STABLE. Sometimes one or another or even both get hit by something
> > and OS freezes. It looks like hardware stops working, but OS do not
> > catch panic. It means if ping is constantly running on console it would
> > look like network went down. Any command or logging in would hang forever
> > like it happens when disk do not respond.
> Providing a dmesg and information about things like firewalling would 
> be a good start. I've seen things like this when attempting to use 
> multiple bge NICs and also with IPFilter.

There is no ipfilter nor npf running. One system use software RAID and
the other have hardware RAID. Both have dynamic network configuration
using net/zebra, as we use it on many other systems. dmesg follows.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.1_STABLE (Blaze) #9: Tue Feb 11 21:36:19 MSK 2020
        kab00m@almaz:/export/build/obj/amd64/sys/arch/amd64/compile/Blaze
total memory = 4095 MB
avail memory = 3952 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
ASUS RS120-E5/PA4 (1.00)
mainbus0 (root)
ACPI: RSDP 0x00000000000FAD20 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000EFF90000 000048 (v01 070609 RSDT1927 20090706 MSFT 00000097)
ACPI: FACP 0x00000000EFF90200 000084 (v02 070609 FACP1927 20090706 MSFT 00000097)
ACPI: DSDT 0x00000000EFF90440 005435 (v01 S0057  S0057000 00000000 INTL 20060113)
ACPI: FACS 0x00000000EFF9E000 000040
ACPI: APIC 0x00000000EFF90390 00006C (v01 070609 APIC1927 20090706 MSFT 00000097)
ACPI: MCFG 0x00000000EFF90400 00003C (v01 070609 OEMMCFG  20090706 MSFT 00000097)
ACPI: OEMB 0x00000000EFF9E040 000061 (v01 070609 OEMB1927 20090706 MSFT 00000097)
ACPI: ASF! 0x00000000EFF95880 000099 (v32 LEGEND I865PASF 00000001 INTL 20060113)
ACPI: EINJ 0x00000000EFF95920 000130 (v01 AMIER  AMI_EINJ 20090706 MSFT 00000097)
ACPI: BERT 0x00000000EFF95AB0 000030 (v01 AMIER  AMI_BERT 20090706 MSFT 00000097)
ACPI: ERST 0x00000000EFF95AE0 0001B0 (v01 AMIER  AMI_ERST 20090706 MSFT 00000097)
ACPI: HEST 0x00000000EFF95C90 0000A8 (v01 AMIER  AMI_HEST 20090706 MSFT 00000097)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz, id 0x1067a
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz, id 0x1067a
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 2
cpu2: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz, id 0x1067a
cpu2: package 0, core 2, smt 0
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz, id 0x1067a
cpu3: package 0, core 3, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <070609,RSDT1927,20090706>, AslId <MSFT,00000097>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810752C008 0001D2 (v01 AMI    CPU1PM   00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810EDA1C08 000143 (v01 AMI    CPU2PM   00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810EDA1A88 000143 (v01 AMI    CPU3PM   00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810EDA1908 000143 (v01 AMI    CPU4PM   00000001 INTL 20060113)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
MCH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
SIOR (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
FWH (INT0800) at acpi0 not configured
FWHE (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
ACPI: Enabled 1 GPEs in block 00 to 1F
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 29f0 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: vendor 8086 product 29f1 (rev. 0x01)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 2.5GT/s
pci1 at ppb0 bus 5
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 0: vendor 8086 product 27d0 (rev. 0x01)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: vendor 8086 product 27e0 (rev. 0x01)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci3 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
bge0: interrupting at msi0 vec 0
bge0: HW config 00000155, 00000015, 00000030, 00000000 00000000
bge0: ASIC BCM5750 C1 (0x4201), Ethernet address 00:22:15:02:86:a2
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 5: vendor 8086 product 27e2 (rev. 0x01)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
bge1 at pci4 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
bge1: interrupting at msi1 vec 0
bge1: HW config 00000155, 00000015, 00000030, 00000000 00000000
bge1: ASIC BCM5750 C1 (0x4201), Ethernet address 00:22:15:02:8a:26
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 8086 product 27c8 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 8086 product 27c9 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 8086 product 27ca (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 8086 product 27cc (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0xe1)
pci5 at ppb4 bus 1
pci5: i/o space, memory space enabled
vga0 at pci5 dev 4 function 0: vendor 18ca product 0020 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 27b8 (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 27c1 (rev. 0x01)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 0xc720ff03<PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A>
atabus2 at ahcisata0 channel 0
atabus3 at ahcisata0 channel 1
atabus4 at ahcisata0 channel 2
atabus5 at ahcisata0 channel 3
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 27da (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat  10 us, pow 88000 mW, 2830 MHz
acpicpu0: P1: FFH, lat  10 us, pow 45408 mW, 1998 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-860S, HE00  189226, 1.00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 3: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus2 drive 0
wd0: <ST32000641AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
dk0 at wd0: "wd0e", 3907027120 blocks at 2048, type: raidframe
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus3 drive 0
wd1: <ST32000641AS>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
dk1 at wd1: "wd1e", 3907027120 blocks at 2048, type: raidframe
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus4 drive 0
wd2: <ST32000644NS>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
dk2 at wd2: "wd2e", 3907027120 blocks at 2048, type: raidframe
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd3 at atabus5 drive 0
wd3: <ST32000641AS>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
dk3 at wd3: "wd3e", 3907027120 blocks at 2048, type: raidframe
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd3(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture, mmap
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
pad0: Latency: 139 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
WARNING: findroot: double match for boot device (wd0, wd1)
WARNING: findroot: double match for boot device (wd0, wd3)
raid0: RAID Level 1
raid0: Components: /dev/dk0 /dev/dk1
raid0: Total Sectors: 3907026944 (1907728 MB)
dk4 at raid0: "raid0a", 2097152 blocks at 0, type: ffs
dk5 at raid0: "raid0b", 8388608 blocks at 2097152, type: swap
dk6 at raid0: "raid0e", 33554432 blocks at 10485760, type: ffs
dk7 at raid0: "raid0f", 33554432 blocks at 44040192, type: ffs
dk8 at raid0: "raid0g", 3829432320 blocks at 77594624, type: ffs
raid5: RAID Level 1
raid5: Components: /dev/dk3 /dev/dk2
raid5: Total Sectors: 3907026944 (1907728 MB)

--
Sincerely yours,
Dima Veselov
Physics R&D Establishment of Saint-Petersburg University