NetBSD-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: NetBSD_10.0_BETA boot issues
Here’s one then. (Note the log entires about ehci0: missed micro frame have always been there for this machine no matter which version of NetBSD is used.)
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020, 2021, 2022
[ 1.000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 10.0_BETA (GENERIC) #0: Sat Dec 31 04:55:53 UTC 2022
[ 1.000000] mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 12175 MB
[ 1.000000] avail memory = 11749 MB
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] RTC BIOS diagnostic error 0x50<ROM_cksum,memory_size>
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.000004] efi: systbl at pa cad28f18
[ 1.000004] mainbus0 (root)
[ 1.000004] ACPI: RSDP 0x00000000CAC11000 000024 (v02 HPQOEM)
[ 1.000004] ACPI: XSDT 0x00000000CAC11078 000074 (v01 HPQOEM SLIC-BPC 01072009 AMI 00010013)
[ 1.000004] ACPI: FACP 0x00000000CAC18C58 0000F4 (v04 HPQOEM SLIC-BPC 01072009 AMI 00010013)
[ 1.000004] ACPI: DSDT 0x00000000CAC11180 007AD7 (v02 HPQOEM SLIC-BPC 00000008 INTL 20051117)
[ 1.000004] ACPI: FACS 0x00000000CAD0EF80 000040
[ 1.000004] ACPI: APIC 0x00000000CAC18D50 000092 (v03 HPQOEM SLIC-BPC 01072009 AMI 00010013)
[ 1.000004] ACPI: SSDT 0x00000000CAC18DE8 0001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 1.000004] ACPI: MCFG 0x00000000CAC18FC0 00003C (v01 HPQOEM SLIC-BPC 01072009 MSFT 00000097)
[ 1.000004] ACPI: HPET 0x00000000CAC19000 000038 (v01 HPQOEM SLIC-BPC 01072009 AMI. 00000004)
[ 1.000004] ACPI: ASF! 0x00000000CAC19038 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 1.000004] ACPI: SSDT 0x00000000CAC190D8 005270 (v01 COMPAQ WMI 00000001 MSFT 03000001)
[ 1.000004] ACPI: SLIC 0x00000000CAC1E348 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
[ 1.000004] ACPI: TCPA 0x00000000CAC1E4C0 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
[ 1.000004] ACPI: DMAR 0x00000000CAC1E4F8 0000E8 (v01 ALASKA A M I 00000001 INTL 00000001)
[ 1.000004] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 1.000004] ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 24 pins
[ 1.000004] cpu0 at mainbus0 apid 0
[ 1.000004] cpu0: Use lfence to serialize rdtsc
[ 1.000004] cpu0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, id 0x206a7
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0
[ 1.000004] cpu1 at mainbus0 apid 2
[ 1.000004] cpu1: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, id 0x206a7
[ 1.000004] cpu1: node 0, package 0, core 1, smt 0
[ 1.000004] cpu2 at mainbus0 apid 4
[ 1.000004] cpu2: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, id 0x206a7
[ 1.000004] cpu2: node 0, package 0, core 2, smt 0
[ 1.000004] cpu3 at mainbus0 apid 6
[ 1.000004] cpu3: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, id 0x206a7
[ 1.000004] cpu3: node 0, package 0, core 3, smt 0
[ 1.000004] cpu4 at mainbus0 apid 1
[ 1.000004] cpu4: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, id 0x206a7
[ 1.000004] cpu4: node 0, package 0, core 0, smt 1
[ 1.000004] cpu5 at mainbus0 apid 3
[ 1.000004] cpu5: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, id 0x206a7
[ 1.000004] cpu5: node 0, package 0, core 1, smt 1
[ 1.000004] cpu6 at mainbus0 apid 5
[ 1.000004] cpu6: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, id 0x206a7
[ 1.000004] cpu6: node 0, package 0, core 2, smt 1
[ 1.000004] cpu7 at mainbus0 apid 7
[ 1.000004] cpu7: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz, id 0x206a7
[ 1.000004] cpu7: node 0, package 0, core 3, smt 1
[ 1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
[ 1.000004] acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,01072009>, AslId <AMI ,00010013>
[ 1.000004] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFF908B61053008 0006F4 (v01 AMI IST 00000001 MSFT 03000001)
[ 1.000004] ACPI: Dynamic OEM Table Load:
[ 1.000004] ACPI: SSDT 0xFFFF908B60EA4708 0000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 1.000004] acpi0: SCI interrupting at int 9
[ 1.000004] acpi0: fixed power button present
[ 1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[ 1.008258] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[ 1.008258] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[ 1.009003] MCH (PNP0C01) at acpi0 not configured
[ 1.009003] pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
[ 1.009003] pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
[ 1.009003] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
[ 1.009003] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.009003] spkr0 at pcppi1: PC Speaker
[ 1.009003] wsbell at spkr0 not configured
[ 1.009003] midi0 at pcppi1: PC speaker
[ 1.009003] sysbeep0 at pcppi1
[ 1.009003] com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
[ 1.009003] com0: ns16550a, 16-byte FIFO
[ 1.009003] tpm0 at acpi0 (TPM, IFX0102-1): mem 0xfed40000-0xfed44fff
[ 1.009003] tpm0: device 0x000b15d1 rev 0x10
[ 1.009003] PCH (PNP0C01) at acpi0 not configured
[ 1.009003] acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
[ 1.009003] RMEM (PNP0C01) at acpi0 not configured
[ 1.009003] acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
[ 1.009003] wmihp0 at acpiwmi0: HP WMI mappings
[ 1.009003] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 1.009003] attimer1: attached to pcppi1
[ 1.009003] autoconfiguration error: ipmi0: ipmi_map_regs:bus_space_map(..., 0, 2, 0, 0xffffffff81ebc700) type m failed 35
[ 1.009003] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.009003] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.009003] pchb0 at pci0 dev 0 function 0: Intel Sandy Bridge (desktop) Host Bridge (rev. 0x09)
[ 1.009003] i915drmkms0 at pci0 dev 2 function 0: Intel Sandy Bridge (desktop) GI1 Integrated Graphics Device (rev. 0x09)
[ 1.009003] Intel 6 Series Chipset Family MEI (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
[ 1.009003] puc0 at pci0 dev 22 function 3: Intel 6 Series KT (com)
[ 1.009003] com2 at puc0 port 0 (16550-compatible): ioaddr 0xf0e0, interrupting at ioapic0 pin 17
[ 1.009003] com2: ns16550a, 16-byte FIFO
[ 1.009003] wm0 at pci0 dev 25 function 0, 64-bit DMA: PCH2 LAN (82579LM) Controller (rev. 0x04)
[ 1.009003] wm0: interrupting at msi0 vec 0
[ 1.009003] wm0: PCI-Express bus
[ 1.009003] wm0: 2048 words FLASH, version 0.13.4
[ 1.009003] wm0: Ethernet address 80:c1:6e:e3:b8:bd
[ 1.009003] wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
[ 1.009003] ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
[ 1.009003] ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.009003] ehci0 at pci0 dev 26 function 0: Intel 6 Series Chipset Family USB (rev. 0x04)
[ 1.009003] ehci0: 64-bit DMA
[ 1.009003] ehci0: interrupting at ioapic0 pin 16
[ 1.009003] ehci0: BIOS has given up ownership
[ 1.009003] ehci0: EHCI version 1.0
[ 1.009003] ehci0: Using DMA subregion for control data structures
[ 1.009003] usb0 at ehci0: USB revision 2.0
[ 1.009003] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
[ 1.009003] hdaudio0: interrupting at msi1 vec 0
[ 1.009003] hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[ 1.009003] hdafg0 at hdaudio0: Realtek ALC662
[ 1.009003] hdafg0: DAC00 2ch: Speaker [Jack], HP Out [Jack]
[ 1.009003] hdafg0: DAC01 2ch: Speaker [Built-In]
[ 1.009003] hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
[ 1.009003] hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
[ 1.009003] audio0 at hdafg0: playback, capture, full duplex, independent
[ 1.009003] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.009003] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[ 1.009003] spkr1 at audio0: PC Speaker (synthesized)
[ 1.009003] wsbell at spkr1 not configured
[ 1.009003] hdafg1 at hdaudio0: Intel product 2805
[ 1.009003] hdafg1: DP00 8ch: Digital Out [Jack]
[ 1.009003] hdafg1: 8ch/0ch 48000Hz PCM16*
[ 1.009003] audio1 at hdafg1: playback, capture, full duplex, independent
[ 1.009003] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[ 1.009003] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[ 1.009003] spkr2 at audio1: PC Speaker (synthesized)
[ 1.009003] wsbell at spkr2 not configured
[ 1.009003] ppb0 at pci0 dev 28 function 0: Intel 6 Series Chipset Family PCIe Root Port 1 (rev. 0xb4)
[ 1.009003] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
[ 1.009003] pci1 at ppb0 bus 1
[ 1.009003] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.009003] ppb1 at pci0 dev 28 function 4: Intel 6 Series Chipset Family PCIe Root Port 5 (rev. 0xb4)
[ 1.009003] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.009003] pci2 at ppb1 bus 2
[ 1.009003] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.009003] xhci0 at pci2 dev 0 function 0: Renesas Technologies uPD720201 USB 3.0 Host Controller (rev. 0x03)
[ 1.009003] xhci0: 64-bit DMA
[ 1.009003] xhci0: interrupting at msix2 vec 0
[ 1.009003] xhci0: xHCI version 1.0
[ 1.009003] usb1 at xhci0: USB revision 3.0
[ 1.009003] usb2 at xhci0: USB revision 2.0
[ 1.009003] ppb2 at pci0 dev 28 function 6: Intel 6 Series Chipset Family PCIe Root Port 7 (rev. 0xb4)
[ 1.009003] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.009003] pci3 at ppb2 bus 3
[ 1.009003] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.009003] ppb3 at pci0 dev 28 function 7: Intel 6 Series Chipset Family PCIe Root Port 8 (rev. 0xb4)
[ 1.009003] ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.009003] pci4 at ppb3 bus 4
[ 1.009003] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[ 1.009003] ehci1 at pci0 dev 29 function 0: Intel 6 Series Chipset Family USB (rev. 0x04)
[ 1.009003] ehci1: 64-bit DMA
[ 1.009003] ehci1: interrupting at ioapic0 pin 23
[ 1.009003] ehci1: BIOS has given up ownership
[ 1.009003] ehci1: EHCI version 1.0
[ 1.009003] ehci1: Using DMA subregion for control data structures
[ 1.009003] usb3 at ehci1: USB revision 2.0
[ 1.009003] ppb4 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xa4)
[ 1.009003] pci5 at ppb4 bus 5
[ 1.009003] pci5: i/o space, memory space enabled
[ 1.009003] ichlpcib0 at pci0 dev 31 function 0: Intel Q65 LPC (rev. 0x04)
[ 1.009003] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
[ 1.009003] ichlpcib0: 24-bit timer
[ 1.009003] tco0 at ichlpcib0: TCO (watchdog) timer configured.
[ 1.009003] tco0: Min/Max interval 1/367 seconds
[ 1.009003] ahcisata0 at pci0 dev 31 function 2: Intel 6 Series Chipset Family AHCI 1 (rev. 0x04)
[ 1.009003] ahcisata0: 64-bit DMA
[ 1.009003] ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xe730ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
[ 1.009003] ahcisata0: interrupting at msi3 vec 0
[ 1.009003] atabus0 at ahcisata0 channel 0
[ 1.009003] atabus1 at ahcisata0 channel 1
[ 1.009003] atabus2 at ahcisata0 channel 2
[ 1.009003] atabus3 at ahcisata0 channel 4
[ 1.009003] ichsmb0 at pci0 dev 31 function 3: Intel 6 Series Chipset Family SMBus Controller (rev. 0x04)
[ 1.009003] ichsmb0: interrupting at ioapic0 pin 18
[ 1.009003] iic0 at ichsmb0: I2C bus
[ 1.009003] isa0 at ichlpcib0
[ 1.009003] acpicpu0 at cpu0: ACPI CPU
[ 1.009003] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
[ 1.009003] acpicpu0: C2: FFH, lat 80 us, pow 500 mW
[ 1.009003] acpicpu0: C3: FFH, lat 104 us, pow 350 mW, bus master check
[ 1.009003] acpicpu0: P0: FFH, lat 10 us, pow 95000 mW, 3401 MHz, turbo boost
[ 1.009003] acpicpu0: P1: FFH, lat 10 us, pow 95000 mW, 3400 MHz
[ 1.009003] acpicpu0: P2: FFH, lat 10 us, pow 87000 mW, 3200 MHz
[ 1.009003] acpicpu0: P3: FFH, lat 10 us, pow 80000 mW, 3000 MHz
[ 1.009003] acpicpu0: P4: FFH, lat 10 us, pow 73000 mW, 2800 MHz
[ 1.009003] acpicpu0: P5: FFH, lat 10 us, pow 66000 mW, 2600 MHz
[ 1.009003] acpicpu0: P6: FFH, lat 10 us, pow 60000 mW, 2400 MHz
[ 1.009003] acpicpu0: P7: FFH, lat 10 us, pow 54000 mW, 2200 MHz
[ 1.009003] acpicpu0: P8: FFH, lat 10 us, pow 48000 mW, 2000 MHz
[ 1.009003] acpicpu0: P9: FFH, lat 10 us, pow 42000 mW, 1800 MHz
[ 1.009003] acpicpu0: P10: FFH, lat 10 us, pow 36000 mW, 1600 MHz
[ 1.009003] acpicpu0: T0: FFH, lat 1 us, pow 1000 mW, 100 %
[ 1.009003] acpicpu0: T1: FFH, lat 1 us, pow 875 mW, 88 %
[ 1.009003] acpicpu0: T2: FFH, lat 1 us, pow 750 mW, 75 %
[ 1.009003] acpicpu0: T3: FFH, lat 1 us, pow 625 mW, 63 %
[ 1.009003] acpicpu0: T4: FFH, lat 1 us, pow 500 mW, 50 %
[ 1.009003] acpicpu0: T5: FFH, lat 1 us, pow 375 mW, 38 %
[ 1.009003] acpicpu0: T6: FFH, lat 1 us, pow 250 mW, 25 %
[ 1.009003] acpicpu0: T7: FFH, lat 1 us, pow 125 mW, 13 %
[ 1.009003] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=98
[ 1.009003] acpicpu1 at cpu1: ACPI CPU
[ 1.009003] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=98
[ 1.009003] acpicpu2 at cpu2: ACPI CPU
[ 1.009003] coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=98
[ 1.009003] acpicpu3 at cpu3: ACPI CPU
[ 1.009003] coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=98
[ 1.009003] acpicpu4 at cpu4: ACPI CPU
[ 1.009003] acpicpu5 at cpu5: ACPI CPU
[ 1.009003] acpicpu6 at cpu6: ACPI CPU
[ 1.009003] acpicpu7 at cpu7: ACPI CPU
[ 1.009003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.009003] timecounter: Timecounter "TSC" frequency 3392295000 Hz quality 3000
[ 1.915601] uhub0 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.937643] uhub0: 4 ports with 4 removable, self powered
[ 1.937643] uhub1 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.957643] uhub1: 4 ports with 4 removable, self powered
[ 1.957643] uhub2 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.977643] uhub2: 3 ports with 3 removable, self powered
[ 1.977643] IPsec: Initialized Security Association Processing.
[ 1.977643] uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.997643] uhub3: 3 ports with 3 removable, self powered
[ 2.008053] nvmm0: attached, using backend x86-vmx
[ 2.017646] tpm0: read 8 bytes, expected 10
[ 2.037643] tpm0: deactivating entropy source
[ 2.067643] ahcisata0 port 1: device present, speed: 3.0Gb/s
[ 2.077643] ahcisata0 port 0: device present, speed: 6.0Gb/s
[ 2.077643] ahcisata0 port 2: device present, speed: 3.0Gb/s
[ 2.087643] ahcisata0 port 4: device present, speed: 1.5Gb/s
[ 2.107642] tpm0: read 8 bytes, expected 10
[ 2.127642] tpm0: deactivating entropy source
[ 2.137642] wd0 at atabus0 drive 0
[ 2.151472] wd0: <ST500DM002-1BD142>
[ 2.151472] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[ 2.151472] wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors (4096 bytes/physsect; first aligned sector: 8)
[ 2.177643] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA, NCQ (32 tags)
[ 2.177643] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags)
[ 2.177643] wd1 at atabus1 drive 0
[ 2.177643] wd1: <PNY CS900 120GB SSD>
[ 2.177643] wd1: drive supports 16-sector PIO transfers, LBA48 addressing
[ 2.177643] wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
[ 2.177643] wd1: GPT GUID: e1bed8aa-0032-45ae-a36d-48420bd8d7be
[ 2.177643] dk0 at wd1: "577ebadd-6452-4197-baf3-672af8582b1f", 209505088 blocks at 64, type: ffs
[ 2.187998] dk1 at wd1: "422351f5-00c2-4cda-85f2-ac9db1d0f4e0", 24936448 blocks at 209505152, type: swap
[ 2.187998] wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 2.187998] wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 2.187998] wd2 at atabus2 drive 0
[ 2.187998] wd2: <ST2000DM001-1ER164>
[ 2.187998] wd2: drive supports 16-sector PIO transfers, LBA48 addressing
[ 2.187998] wd2: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors (4096 bytes/physsect; first aligned sector: 8)
[ 2.197643] wd2: GPT GUID: cc5d76a2-ffce-4c80-a381-80f329b20a89
[ 2.197643] dk2 at wd2: "e1f13ed5-b9e9-48fa-af2d-42b8b4d81e63", 67550 blocks at 34, type: msdos
[ 2.208054] dk3 at wd2: "25f34785-b72d-4e1f-8766-648de5d17f81", 1572864 blocks at 67584, type: ffs
[ 2.208054] dk4 at wd2: "f033ecfb-8b37-499e-ace0-a309b1b53b6f", 786432 blocks at 1640448, type: swap
[ 2.208054] dk5 at wd2: "d56f7351-d6cb-4640-aab7-6478717a3238", 37748736 blocks at 2426880, type: ffs
[ 2.208054] dk6 at wd2: "69f01a98-61aa-4905-8ecc-0466d4d3adc9", 100663296 blocks at 40175616, type: ffs
[ 2.208054] dk7 at wd2: "516b7748-aefb-4fdf-bdee-781cf645a45e", 6291456 blocks at 140838912, type: ffs
[ 2.208054] dk8 at wd2: "0b25824c-66f9-439c-897b-0639f351b7f8", 3759898767 blocks at 147130368, type: ffs
[ 2.208054] wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[ 2.208054] wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
[ 2.208054] atapibus0 at atabus3: 1 targets
[ 2.217642] cd0 at atapibus0 drive 0: <ASUS DRW-24B1ST j, H3D0CL185182, 1.01> cdrom removable
[ 2.217642] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
[ 2.217642] cd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
[ 2.767640] umass0 at uhub0 port 4 configuration 1 interface 0
[ 2.787640] umass0: Generic (0x058f) Mass Storage Device (0x8461), rev 3.00/1.00, addr 1
[ 2.807640] umass0: using SCSI over Bulk-Only
[ 2.817640] scsibus0 at umass0: 2 targets, 5 luns per target
[ 2.837640] sd0 at scsibus0 target 0 lun 0: <Generic-, Compact Flash, 1.01> disk removable
[ 2.857640] sd0: drive offline
[ 2.887640] sd1 at scsibus0 target 0 lun 1: <Generic-, SD/MMC, 1.00> disk removable
[ 2.907639] sd1: drive offline
[ 2.927639] sd2 at scsibus0 target 0 lun 2: <Generic-, MS/MS-Pro, 1.03> disk removable
[ 2.947639] sd2: drive offline
[ 2.977640] sd3 at scsibus0 target 0 lun 3: <Generic-, xD-Picture, 1.02> disk removable
[ 2.997639] sd3: drive offline
[ 3.017639] sd4 at scsibus0 target 0 lun 4: <Generic-, MicroSD/M2, 1.08> disk removable
[ 3.037639] sd4: drive offline
[ 3.097639] uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
[ 3.097639] uhub4: single transaction translator
[ 3.097639] uhub4: 6 ports with 6 removable, self powered
[ 3.107640] uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
[ 3.127638] uhub5: single transaction translator
[ 3.147638] uhub5: 8 ports with 8 removable, self powered
[ 3.927636] uhub6 at uhub4 port 5: vendor 0557 (0x0557) product 7000 (0x7000), class 9/0, rev 1.10/1.00, addr 3
[ 3.927636] uhub6: 4 ports with 4 removable, self powered
[ 4.817633] uhidev0 at uhub6 port 1 configuration 1 interface 0
[ 4.817633] uhidev0: ATEN (0x0557) CS-1734A V4.2.419 (0x2213), rev 1.10/1.00, addr 4, iclass 3/1
[ 4.837633] ukbd0 at uhidev0
[ 4.837633] wskbd0 at ukbd0: console keyboard
[ 4.847970] uhidev1 at uhub6 port 1 configuration 1 interface 1
[ 4.847970] uhidev1: ATEN (0x0557) CS-1734A V4.2.419 (0x2213), rev 1.10/1.00, addr 4, iclass 3/1
[ 4.867632] ums0 at uhidev1: 5 buttons and Z dir
[ 4.867632] wsmouse0 at ums0 mux 0
[ 4.867632] swwdog0: software watchdog initialized
[ 4.987632] WARNING: 1 error while detecting hardware; check system log.
[ 5.007631] boot device: wd2
[ 5.037631] root on dk3 dumps on dk1
[ 5.067632] root file system type: ffs
[ 5.087631] kern.module.path=/stand/amd64/10.0/modules
[ 5.113455] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.113455] [drm] Driver supports precise vblank timestamp query.
[ 5.113455] i915drmkms0: interrupting at msi4 vec 0 (i915drmkms0)
[ 5.127632] [drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
[ 5.177631] intelfb0 at i915drmkms0
[ 5.197631] [drm] DRM_I915_DEBUG enabled
[ 5.217631] [drm] DRM_I915_DEBUG_GEM enabled
[ 5.237630] intelfb0: framebuffer at 0xd0005000, size 1920x1200, depth 32, stride 7680
[ 5.317631] {drm:netbsd:intel_cpu_fifo_underrun_irq_handler+0x64} *ERROR* CPU pipe A FIFO underrun
[ 5.317631] {drm:netbsd:intel_set_pch_fifo_underrun_reporting+0x14e} *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 5.317631] {drm:netbsd:cpt_irq_handler+0x1dd} *ERROR* PCH transcoder A FIFO underrun
[ 5.327631] no data for est. mode 640x480x67
[ 5.937628] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
[ 6.007627] wsmux1: connecting to wsdisplay0
[ 7.017625] entropy: ready
[ 7.957620] tap0: Ethernet address f2:0b:a4:74:8f:dd
[ 7.967621] tap1: Ethernet address f2:0b:a4:48:14:14
[ 7.977620] tap2: Ethernet address f2:0b:a4:4f:d6:f7
[ 7.987620] tap3: Ethernet address f2:0b:a4:f4:70:26
[ 16.537588] no data for est. mode 640x480x67
[ 16.537588] wsdisplay0: screen 1 added (default, vt100 emulation)
[ 16.537588] no data for est. mode 640x480x67
[ 16.537588] wsdisplay0: screen 2 added (default, vt100 emulation)
[ 16.537588] no data for est. mode 640x480x67
[ 16.537588] wsdisplay0: screen 3 added (default, vt100 emulation)
[ 16.537588] no data for est. mode 640x480x67
[ 16.537588] wsdisplay0: screen 4 added (default, vt100 emulation)
[ 1544.481732] ehci0: missed microframe, TT reset not implemented, hub might be inoperational
On Jan 5, 2023, at 7:02 AM, Martin Husemann <martin%duskware.de@localhost> wrote:
> On Thu, Jan 05, 2023 at 06:43:32AM -0600, Robert Nestor wrote:
>> Yes it is, but getting a dmesg during the failure seems to be
>> difficult since I haven?t seen a failure when booting with serial
>> console and most of the details of the failure scroll off the screen
>> before the boot crashes.
>
> We don't need the dmesg from the failure case, the working one is fine.
>
> Martin
Home |
Main Index |
Thread Index |
Old Index