Hello Martin, On 15.06.24 15:59, Martin Husemann wrote:
On Sat, Jun 15, 2024 at 03:20:35PM +0200, Matthias Petermann wrote:[ xxx.xxxxxx ] sd0(umass0:0:0:0): generic HBA errorWe need the full dmesg (or at least the relevant parts of the USB host controller that sd0 is attach to) and you probably need to run with some debugging enabled (details and switches for that depend on the USB host controller) to analyze this further.
This is the dmesg from a fresh boot. Kind regards Matthias ```[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 10.0_STABLE (GENERIC) #0: Mon May 20 13:37:36 CEST 2024 [ 1.000000] mpeterma%celsius.lan@localhost:/home/mpeterma/Projects/OS/netbsd/obj/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 12255 MB [ 1.000000] avail memory = 11831 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.000004] mainbus0 (root) [ 1.000004] ACPI: RSDP 0x00000000000F8F50 000024 (v02 HP )[ 1.000004] ACPI: XSDT 0x00000000DDFA0100 00007C (v01 HP ProLiant 20131001 HP 00000097) [ 1.000004] ACPI: FACP 0x00000000DDFA0290 0000F4 (v03 HP ProLiant 20131001 HP 00000097) [ 1.000004] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20221020/tbfadt-640) [ 1.000004] ACPI: DSDT 0x00000000DDFA0620 006868 (v01 HP ProLiant 00000006 INTL 20051117)
[ 1.000004] ACPI: FACS 0x00000000DDFAE000 000040[ 1.000004] ACPI: APIC 0x00000000DDFA0390 000072 (v01 HP ProLiant 20131001 HP 00000097) [ 1.000004] ACPI: MCFG 0x00000000DDFA0410 00003C (v01 HP ProLiant 20131001 HP 00000097) [ 1.000004] ACPI: SPMI 0x00000000DDFA0450 000041 (v05 HP ProLiant 20131001 HP 00000097) [ 1.000004] ACPI: OEMB 0x00000000DDFAE040 000072 (v01 HP ProLiant 20131001 HP 00000097) [ 1.000004] ACPI: HPET 0x00000000DDFAB4E0 000038 (v01 HP ProLiant 20131001 HP 00000097) [ 1.000004] ACPI: EINJ 0x00000000DDFAB520 000130 (v01 AMIER AMI_EINJ 20131001 HP 00000097) [ 1.000004] ACPI: BERT 0x00000000DDFAB6B0 000030 (v01 AMIER AMI_BERT 20131001 HP 00000097) [ 1.000004] ACPI: ERST 0x00000000DDFAB6E0 0001B0 (v01 AMIER AMI_ERST 20131001 HP 00000097) [ 1.000004] ACPI: HEST 0x00000000DDFAB890 0000A8 (v01 AMIER ABC_HEST 20131001 HP 00000097) [ 1.000004] ACPI: SSDT 0x00000000DDFAB940 00052A (v01 HP ProLiant 00000001 AMD 00000001)
[ 1.000004] ACPI: 2 ACPI AML tables successfully acquired and loaded[ 1.000004] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x21, 24 pins
[ 1.000004] cpu0 at mainbus0 apid 0 [ 1.000004] cpu0: Use mfence to serialize rdtsc[ 1.000004] cpu0: AMD Turion(tm) II Neo N54L Dual-Core Processor, id 0x100f63
[ 1.000004] cpu0: node 0, package 0, core 0, smt 0 [ 1.000004] cpu1 at mainbus0 apid 1[ 1.000004] cpu1: AMD Turion(tm) II Neo N54L Dual-Core Processor, id 0x100f63
[ 1.000004] cpu1: node 0, package 0, core 1, smt 0 [ 1.000004] acpi0 at mainbus0: Intel ACPICA 20221020[ 1.000004] acpi0: X/RSDT: OemId <HP ,ProLiant,20131001>, AslId <HP ,00000097>
[ 1.000004] ACPI: Dynamic OEM Table Load:[ 1.000004] ACPI: OEMN 0xFFFF847E89608008 000624 (v01 AMD NAHP 00000001 INTL 20051117) [ 1.000004] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
[ 1.000004] acpi0: SCI interrupting at int 9 [ 1.000004] acpi0: fixed power button present[ 1.000004] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 [ 1.053549] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.053549] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[ 1.053673] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 [ 1.053673] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 [ 1.053673] spkr0 at pcppi1: PC Speaker [ 1.053673] wsbell at spkr0 not configured [ 1.053673] midi0 at pcppi1: PC speaker [ 1.053673] sysbeep0 at pcppi1 [ 1.053673] RMEM (PNP0C01) at acpi0 not configured [ 1.053673] acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button [ 1.053673] ACPI: Enabled 4 GPEs in block 00 to 1F [ 1.053673] attimer1: attached to pcppi1[ 1.053673] autoconfiguration error: ipmi0: ipmi_map_regs:bus_space_map(..., 0, 2, 0, 0xffffffff81d41700) type m failed 35
[ 1.053673] pci0 at mainbus0 bus 0: configuration mode 1[ 1.053673] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.053673] pchb0 at pci0 dev 0 function 0: AMD RS785/RS880 Host Bridge (rev. 0x00) [ 1.053673] ppb0 at pci0 dev 1 function 0: Hewlett-Packard (AMD) RS780 PCI-PCI Bridge (int gfx) (rev. 0x00)
[ 1.053673] pci1 at ppb0 bus 1 [ 1.053673] pci1: i/o space, memory space enabled[ 1.053673] radeon0 at pci1 dev 5 function 0: ATI Technologies Radeon HD 4200 Mobility (rev. 0x00) [ 1.053673] ppb1 at pci0 dev 2 function 0: AMD RS780 PCI-PCI Bridge (ext gfx port 0) (rev. 0x00) [ 1.053673] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT/s
[ 1.053673] ppb1: link is x1 @ 2.5GT/s [ 1.053673] pci2 at ppb1 bus 2 [ 1.053673] pci2: i/o space, memory space enabled, rd/line, wr/inv ok[ 1.053673] xhci0 at pci2 dev 0 function 0: Renesas Technologies uPD720202 USB 3.0 Host Controller (rev. 0x02)
[ 1.053673] xhci0: 64-bit DMA [ 1.053673] xhci0: interrupting at ioapic0 pin 18 [ 1.053673] xhci0: xHCI version 1.0 [ 1.053673] usb0 at xhci0: USB revision 3.0 [ 1.053673] usb1 at xhci0: USB revision 2.0[ 1.053673] ppb2 at pci0 dev 4 function 0: AMD RS780/RS880 PCI-PCIE Bridge (port 0) (rev. 0x00) [ 1.053673] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.053673] ppb2: link is x1 @ 2.5GT/s [ 1.053673] pci3 at ppb2 bus 3 [ 1.053673] pci3: i/o space, memory space enabled, rd/line, wr/inv ok[ 1.053673] re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x07)
[ 1.053673] re0: interrupting at ioapic0 pin 16 [ 1.053673] re0: RTL8168E/8111E-VL (0x2c80) [ 1.053673] re0: Ethernet address 00:13:3b:2f:76:94 [ 1.053673] re0: using 256 tx descriptors [ 1.053673] rgephy0 at re0 phy 7: RTL8211E 1000BASE-T media interface[ 1.053673] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.053673] ppb3 at pci0 dev 6 function 0: AMD RS780 PCI-PCIE Bridge (port 2) (rev. 0x00) [ 1.053673] ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.053673] ppb3: link is x1 @ 2.5GT/s [ 1.053673] pci4 at ppb3 bus 4 [ 1.053673] pci4: i/o space, memory space enabled, rd/line, wr/inv ok[ 1.053673] bge0 at pci4 dev 0 function 0: Broadcom BCM5723 Gigabit Ethernet
[ 1.053673] bge0: interrupting at ioapic0 pin 18[ 1.053673] bge0: HW config 00000155, 00004015, 00002830, 00000000 00000000 [ 1.053673] bge0: ASIC BCM5784 B0 (0x5784100), Ethernet address 9c:b6:54:0c:ae:8c
[ 1.053673] bge0: setting short Tx thresholds [ 1.053673] brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4[ 1.053673] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.053673] ahcisata0 at pci0 dev 17 function 0: ATI Technologies SB700-SB900 SATA Controller (AHCI mode) (rev. 0x40)
[ 1.053673] ahcisata0: 64-bit DMA [ 1.053673] ahcisata0: ignoring broken port multiplier support [ 1.053673] ahcisata0: ignoring broken NCQ support[ 1.053673] ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xb720ff03<PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,S64A>
[ 1.053673] ahcisata0: interrupting at ioapic0 pin 19 [ 1.053673] atabus0 at ahcisata0 channel 0 [ 1.053673] atabus1 at ahcisata0 channel 1 [ 1.053673] atabus2 at ahcisata0 channel 2 [ 1.053673] atabus3 at ahcisata0 channel 3[ 1.053673] ohci0 at pci0 dev 18 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00)
[ 1.053673] ohci0: interrupting at ioapic0 pin 18 [ 1.053673] ohci0: OHCI version 1.0, legacy support[ 1.053673] ohci0: autoconfiguration error: SMM does not respond, resetting
[ 1.053673] usb2 at ohci0: USB revision 1.0[ 1.053673] ehci0 at pci0 dev 18 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00)
[ 1.053673] ehci0: 32-bit DMA [ 1.053673] ehci0: interrupting at ioapic0 pin 17 [ 1.053673] ehci0: dropped intr workaround enabled [ 1.053673] ehci0: EHCI version 1.0 [ 1.053673] ehci0: 1 companion controller, 5 ports: ohci0 [ 1.053673] ehci0: Using DMA subregion for control data structures [ 1.053673] usb3 at ehci0: USB revision 2.0[ 1.053673] ohci1 at pci0 dev 19 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00)
[ 1.053673] ohci1: interrupting at ioapic0 pin 18 [ 1.053673] ohci1: OHCI version 1.0, legacy support[ 1.053673] ohci1: autoconfiguration error: SMM does not respond, resetting
[ 1.053673] usb4 at ohci1: USB revision 1.0[ 1.053673] ehci1 at pci0 dev 19 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00)
[ 1.053673] ehci1: 32-bit DMA [ 1.053673] ehci1: interrupting at ioapic0 pin 17 [ 1.053673] ehci1: dropped intr workaround enabled [ 1.053673] ehci1: EHCI version 1.0 [ 1.053673] ehci1: 1 companion controller, 5 ports: ohci1 [ 1.053673] ehci1: Using DMA subregion for control data structures [ 1.053673] usb5 at ehci1: USB revision 2.0[ 1.053673] piixpm0 at pci0 dev 20 function 0: ATI Technologies SBx00 SMBus Controller (rev. 0x42)
[ 1.053673] piixpm0: interrupting at SMI, [ 1.053673] iic0 at piixpm0 port 0: I2C bus [ 1.053673] iic1 at piixpm0 port 1: I2C bus [ 1.053673] iic2 at piixpm0 port 2: I2C bus [ 1.053673] iic3 at piixpm0 port 3: I2C bus[ 1.053673] ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x40)
[ 1.053673] ixpide0: bus-master DMA support present [ 1.053673] ixpide0: primary channel configured to compatibility mode [ 1.053673] ixpide0: primary channel interrupting at ioapic0 pin 14 [ 1.053673] atabus4 at ixpide0 channel 0 [ 1.053673] ixpide0: secondary channel configured to compatibility mode [ 1.053673] ixpide0: secondary channel interrupting at ioapic0 pin 15 [ 1.053673] atabus5 at ixpide0 channel 1[ 1.053673] pcib0 at pci0 dev 20 function 3: ATI Technologies SB700-SB900 LPC Host Controller (rev. 0x40) [ 1.053673] ppb4 at pci0 dev 20 function 4: ATI Technologies SBx00 PCI to PCI Bridge (rev. 0x40)
[ 1.053673] pci5 at ppb4 bus 5 [ 1.053673] pci5: i/o space, memory space enabled[ 1.053673] ohci2 at pci0 dev 22 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00)
[ 1.053673] ohci2: interrupting at ioapic0 pin 18 [ 1.053673] ohci2: OHCI version 1.0, legacy support [ 1.053673] usb6 at ohci2: USB revision 1.0[ 1.053673] ehci2 at pci0 dev 22 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00)
[ 1.053673] ehci2: 32-bit DMA [ 1.053673] ehci2: interrupting at ioapic0 pin 17 [ 1.053673] ehci2: dropped intr workaround enabled [ 1.053673] ehci2: EHCI version 1.0 [ 1.053673] ehci2: 1 companion controller, 4 ports: ohci2 [ 1.053673] ehci2: Using DMA subregion for control data structures [ 1.053673] usb7 at ehci2: USB revision 2.0[ 1.053673] pchb1 at pci0 dev 24 function 0: AMD AMD64 Family10h HyperTransport Configuration (rev. 0x00) [ 1.053673] pchb2 at pci0 dev 24 function 1: AMD AMD64 Family10h Address Map Configuration (rev. 0x00) [ 1.053673] pchb3 at pci0 dev 24 function 2: AMD AMD64 Family10h DRAM Configuration (rev. 0x00) [ 1.053673] amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration [ 1.053673] amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family10h) [ 1.053673] pchb4 at pci0 dev 24 function 4: AMD AMD64 Family10h Link Configuration (rev. 0x00)
[ 1.053673] isa0 at pcib0 [ 1.053673] pckbc0 at isa0 port 0x60-0x64 [ 1.053673] autoconfiguration error: pckbc: cmd word write error [ 1.053673] acpicpu0 at cpu0: ACPI CPU [ 1.053673] acpicpu0: C1: HLT, lat 0 us, pow 0 mW [ 1.053673] acpicpu0: P0: FFH, lat 4 us, pow 10575 mW, 2200 MHz [ 1.053673] acpicpu0: P1: FFH, lat 4 us, pow 8030 mW, 1900 MHz [ 1.053673] acpicpu0: P2: FFH, lat 4 us, pow 5842 mW, 1600 MHz [ 1.053673] acpicpu0: P3: FFH, lat 4 us, pow 4085 mW, 1300 MHz [ 1.053673] acpicpu0: P4: FFH, lat 4 us, pow 2062 mW, 800 MHz [ 1.053673] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % [ 1.053673] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % [ 1.053673] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % [ 1.053673] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % [ 1.053673] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % [ 1.053673] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % [ 1.053673] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % [ 1.053673] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % [ 1.053673] acpicpu1 at cpu1: ACPI CPU[ 1.053673] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.053673] timecounter: Timecounter "TSC" frequency 2196333000 Hz quality 3000 [ 1.324609] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.324609] uhub0: 2 ports with 2 removable, self powered[ 1.324609] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.324609] uhub1: 2 ports with 2 removable, self powered [ 1.333822] IPsec: Initialized Security Association Processing.[ 1.343819] uhub2 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.343819] uhub2: 5 ports with 5 removable, self powered[ 1.343819] uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.343819] uhub3: 5 ports with 5 removable, self powered[ 1.343819] uhub4 at usb4: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.343819] uhub4: 5 ports with 5 removable, self powered[ 1.343819] uhub5 at usb5: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.343819] uhub5: 5 ports with 5 removable, self powered[ 1.343819] uhub6 at usb6: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.343819] uhub6: 4 ports with 4 removable, self powered[ 1.353828] uhub7 at usb7: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.353828] uhub7: 4 ports with 4 removable, self powered [ 1.423829] ahcisata0 port 0: device present, speed: 3.0Gb/s [ 1.423829] ahcisata0 port 1: device present, speed: 3.0Gb/s [ 1.423829] ahcisata0 port 2: device present, speed: 3.0Gb/s [ 1.423829] ahcisata0 port 3: device present, speed: 3.0Gb/s [ 2.413838] umass0 at uhub5 port 3 configuration 1 interface 0[ 2.413838] umass0: SanDisk (0x0781) Cruzer Blade (0x5567), rev 2.00/1.00, addr 2
[ 2.413838] umass0: using SCSI over Bulk-Only [ 2.413838] scsibus0 at umass0: 2 targets, 1 lun per target[ 2.423838] sd0 at scsibus0 target 0 lun 0: <SanDisk, Cruzer Blade, 1.00> disk removable [ 2.423838] sd0: 29340 MB, 59611 cyl, 16 head, 63 sec, 512 bytes/sect x 60088320 sectors
[ 2.433841] sd0: GPT GUID: 72278758-01cb-4efc-b64e-0504ef0688b5[ 2.443838] dk0 at sd0: "f5fcb584-c7a5-4113-a6b9-b743ff2693b6", 51699584 blocks at 64, type: ffs [ 2.443838] dk1 at sd0: "a3ad208b-3a95-4801-bfc7-39091e3a49e5", 8388608 blocks at 51699648, type: swap
[ 3.093845] wd0 at atabus0 drive 0 [ 3.093845] wd0: <WDC WD30EFRX-68EUZN0>[ 3.093845] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 3.093845] wd0: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors (4096 bytes/physsect; first aligned sector: 8)
[ 3.093845] wd0: GPT GUID: 30031f5a-79a0-422d-8480-f5263e565c22 [ 3.093845] dk2 at wd0: "d0", 5860528128 blocks at 4096, type: ffs[ 3.093845] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO [ 3.093845] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
[ 3.093845] wd1 at atabus1 drive 0 [ 3.093845] wd1: <WDC WD30EFZX-68AWUN0>[ 3.093845] wd1: drive supports 16-sector PIO transfers, LBA48 addressing [ 3.093845] wd1: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors (4096 bytes/physsect; first aligned sector: 8)
[ 3.113845] wd1: GPT GUID: e2ec0056-cf92-493a-8e64-9cca7dfbbc80 [ 3.113845] dk3 at wd1: "d1", 5860528128 blocks at 4096, type: ffs[ 3.113845] wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO [ 3.113845] wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
[ 3.113845] wd2 at atabus2 drive 0 [ 3.113845] wd2: <WDC WD30EFRX-68EUZN0>[ 3.113845] wd2: drive supports 16-sector PIO transfers, LBA48 addressing [ 3.113845] wd2: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors (4096 bytes/physsect; first aligned sector: 8)
[ 3.123845] wd2: GPT GUID: a1bf4291-40a3-4dfa-a4e5-1ce0c5d679ad [ 3.123845] dk4 at wd2: "d2", 5860528128 blocks at 4096, type: ffs[ 3.123845] wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO [ 3.123845] wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
[ 3.123845] wd3 at atabus3 drive 0 [ 3.123845] wd3: <WDC WD30EFZX-68AWUN0>[ 3.123845] wd3: drive supports 16-sector PIO transfers, LBA48 addressing [ 3.123845] wd3: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors (4096 bytes/physsect; first aligned sector: 8)
[ 3.133848] wd3: GPT GUID: f8d901e5-8b07-4133-ba9d-53834b60a8a7 [ 3.133848] dk5 at wd3: "d3", 5860528128 blocks at 4096, type: ffs[ 3.133848] wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO [ 3.133848] wd3(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
[ 3.133848] atapibus0 at atabus4: 2 targets[ 3.143839] cd0 at atapibus0 drive 1: <TSSTcorp CDDVDW SH-224BB, R8WS68DCA043ZG, SB00> cdrom removable
[ 3.143839] cd0: 32-bit data port[ 3.143839] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 3.153846] cd0(ixpide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
[ 3.153846] swwdog0: software watchdog initialized[ 3.253849] WARNING: 4 errors while detecting hardware; check system log.
[ 3.253849] boot device: sd0 [ 3.253849] root on dk0 dumps on dk1 [ 3.273846] /: replaying log to memory [ 3.273846] root file system type: ffs [ 3.283845] kern.module.path=/stand/amd64/10.0/modules[ 3.283845] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1609 0x00).
[ 3.283845] [drm] register mmio base: 0xfe6f0000 [ 3.283845] [drm] register mmio size: 65536 [ 3.283845] ATOM BIOS: AMD_1407_150[ 3.283845] radeon0: VRAM: 32M 0x00000000C0000000 - 0x00000000C1FFFFFF (32M used)
[ 3.283845] radeon0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 3.283845] [drm] Detected VRAM RAM=20M, BAR=32M [ 3.283845] [drm] RAM width 32bits DDR[ 3.283845] Zone kernel: Available graphics memory: 9007199253948346 KiB
[ 3.283845] Zone dma32: Available graphics memory: 2097152 KiB [ 3.283845] [drm] radeon: 32M of VRAM memory ready [ 3.283845] [drm] radeon: 512M of GTT memory ready. [ 3.283845] [drm] Loading RS780 Microcode [ 3.303848] [drm] GART: num cpu pages 131072, num gpu pages 131072[ 3.333839] [drm] PCIE GART of 512M enabled (table at 0x00000000C0146000).
[ 3.333839] radeon0: WB enabled[ 3.333839] radeon0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0x0xffff847e89f9bc00 [ 3.353837] radeon0: fence driver on ring 5 use gpu addr 0x00000000c0056038 and cpu addr 0x0xffff858345c86038
[ 3.353837] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.353837] [drm] Driver supports precise vblank timestamp query. [ 3.353837] radeon0: radeon: MSI limited to 32-bit [ 3.353837] radeon0: interrupting at ioapic0 pin 18 (radeon0) [ 3.353837] [drm] radeon: irq initialized. [ 3.393838] [drm] ring test on 0 succeeded in 1 usecs [ 3.563839] [drm] ring test on 5 succeeded in 1 usecs [ 3.563839] [drm] UVD initialized successfully. [ 3.563839] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.783849] uhidev0 at uhub2 port 3 configuration 1 interface 0[ 3.793863] uhidev0: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/24.11, addr 2, iclass 3/1
[ 3.793863] ukbd0 at uhidev0 [ 3.793863] wskbd0 at ukbd0 mux 1 [ 3.793863] uhidev1 at uhub2 port 3 configuration 1 interface 1[ 3.793863] uhidev1: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/24.11, addr 2, iclass 3/1
[ 3.803850] uhidev1: 8 report ids [ 3.803850] ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs [ 3.803850] wsmouse0 at ums0 mux 0 [ 3.803850] uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 [ 3.803850] uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 [ 3.803850] uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 [ 3.803850] uhidev2 at uhub2 port 3 configuration 1 interface 2[ 3.803850] uhidev2: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/24.11, addr 2, iclass 3/0
[ 3.813852] uhidev2: 33 report ids [ 3.813852] uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 [ 3.813852] uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 [ 3.813852] uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 [ 3.813852] uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 [ 4.213857] [drm] ib test on ring 5 succeeded [ 4.213857] [drm] Radeon Display Connectors [ 4.213857] [drm] Connector 0: [ 4.213857] [drm] VGA-1[ 4.213857] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 4.213857] [drm] Encoders: [ 4.213857] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 4.283858] radeondrmkmsfb0 at radeon0[ 4.283858] [drm] Initialized radeon 2.50.0 20080528 for radeon0 on minor 0 [ 4.283858] radeondrmkmsfb0: framebuffer at 0xfa247000, size 1280x1024, depth 16, stride 2560 [ 4.793851] wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation)
[ 4.913852] wsmux1: connecting to wsdisplay0 [ 4.913852] wskbd0: connecting to wsdisplay0 [ 5.623870] /: replaying log to disk [ 15.033961] wsdisplay0: screen 1 added (default, vt100 emulation) [ 15.033961] wsdisplay0: screen 2 added (default, vt100 emulation) [ 15.033961] wsdisplay0: screen 3 added (default, vt100 emulation) [ 15.033961] wsdisplay0: screen 4 added (default, vt100 emulation) ```
Attachment:
OpenPGP_0x92FCF71C2A41A789.asc
Description: OpenPGP public key
Attachment:
OpenPGP_signature.asc
Description: OpenPGP digital signature