pkg/30471: mail/elmo fails during build

To: pkg-manager%netbsd.org@localhost, gnats-admin%netbsd.org@localhost, pkgsrc-bugs%netbsd.org@localhost
Subject: pkg/30471: mail/elmo fails during build
From: Thomas Klausner <wiz%NetBSD.org@localhost>
Date: Wed, 15 Jun 2005 13:11:01 +0000 (UTC)
The following reply was made to PR pkg/30471; it has been noted by GNATS.

From: Thomas Klausner <wiz%NetBSD.org@localhost>
To: pkg%burningsoda.com@localhost
Cc: gnats-bugs%NetBSD.org@localhost
Subject: pkg/30471: mail/elmo fails during build
Date: Wed, 15 Jun 2005 15:10:30 +0200

 Could you please take a look at this and advise?
 
 Thanks,
  Thomas
 
 ----- Forwarded message from diro%nixsys.bz@localhost -----
 
 >Number:         30471
 >Category:       pkg
 >Synopsis:       mail/elmo fails during build
 >Confidential:   no
 >Severity:       serious
 >Priority:       medium
 >Responsible:    pkg-manager
 >State:          open
 >Class:          sw-bug
 >Submitter-Id:   net
 >Arrival-Date:   Wed Jun 08 22:32:00 +0000 2005
 >Originator:     diro%nixsys.bz@localhost
 >Release:        NetBSD 1.6.2
 >Organization:
 >Environment:
 System: NetBSD nixsys 1.6.2 NetBSD 1.6.2 (NIXSYS) #10: Thu Mar 4 22:20:38 EST 
2004 root@nixsys:/usr/src/sys/arch/alpha/compile/NIXSYS alpha
 Architecture: alpha
 Machine: alpha
 >Description:
 
 ===> Checking for vulnerabilities in elmo-1.3.1
 => Checksum SHA1 OK for elmo-1.3.1.tar.gz.
 => Checksum RMD160 OK for elmo-1.3.1.tar.gz.
 ===> Extracting for elmo-1.3.1
 ==========================================================================
 The following variables will affect the build process of this package,
 elmo-1.3.1.  Their current value is shown below:
 
         * SSLBASE (defined)
 
 You may want to abort the process now with CTRL-C and change their value
 before continuing.  Be sure to run `/usr/bin/make clean' after
 the changes.
 ==========================================================================
 ===> Required installed package openssl>=0.9.7d: openssl-0.9.7e found
 ===> Required installed package gpgme>=1.0.1: gpgme-1.0.2nb1 found
 ===> Required installed package libgpg-error>=0.6nb2: libgpg-error-1.0 found
 ===> Required installed package librfuncs>=1.0.4: librfuncs-1.0.6nb1 found
 ===> Required installed package pth>=2.0.0nb2: pth-2.0.0nb2 found
 ===> Patching for elmo-1.3.1
 => Fixing linuxifications.
 ===> Overriding tools for elmo-1.3.1
 ===> Creating toolchain wrappers for elmo-1.3.1
 ===> Configuring for elmo-1.3.1
 => Fixing locale directory references.
 configure: WARNING: If you wanted to set the --build type, don't use --host.
     If a cross compiler is detected then cross compile mode will be used.
 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
 checking whether build environment is sane... yes
 checking for gawk... /usr/bin/awk
 checking whether make sets $(MAKE)... yes
 checking for alpha--netbsd-strip... no
 checking for strip... strip
 checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
 checking for alpha--netbsd-gcc... cc
 checking for C compiler default output file name... a.out
 checking whether the C compiler works... yes
 checking whether we are cross compiling... no
 checking for suffix of executables... 
 checking for suffix of object files... o
 checking whether we are using the GNU C compiler... yes
 checking whether cc accepts -g... yes
 checking for cc option to accept ANSI C... none needed
 checking for style of include used by make... GNU
 checking dependency style of cc... gcc
 checking for alpha--netbsd-g++... c++
 checking whether we are using the GNU C++ compiler... yes
 checking whether c++ accepts -g... yes
 checking dependency style of c++... gcc
 checking for flex... flex
 checking for yywrap in -lfl... yes
 checking lex output file root... lex.yy
 checking whether yytext is a pointer... yes
 checking for strchr... yes
 checking for special C compiler options needed for large files... no
 checking for _FILE_OFFSET_BITS value needed for large files... no
 checking for _LARGE_FILES value needed for large files... no
 checking whether NLS is requested... yes
 checking for msgfmt... /usr/pkg/bin/msgfmt
 checking for gmsgfmt... /usr/pkg/bin/msgfmt
 checking for xgettext... no
 checking for msgmerge... /usr/pkg/bin/msgmerge
 checking build system type... alpha-unknown-netbsd1.6.2
 checking host system type... alpha--netbsd
 checking for alpha--netbsd-ranlib... no
 checking for ranlib... ranlib
 checking for strerror in -lcposix... no
 checking how to run the C preprocessor... cc -E
 checking for egrep... grep -E
 checking for ANSI C header files... no
 checking for an ANSI C-conforming const... yes
 checking for signed... yes
 checking for inline... inline
 checking for sys/types.h... yes
 checking for sys/stat.h... yes
 checking for stdlib.h... yes
 checking for string.h... yes
 checking for memory.h... yes
 checking for strings.h... yes
 checking for inttypes.h... yes
 checking for stdint.h... yes
 checking for unistd.h... yes
 checking for off_t... yes
 checking for size_t... yes
 checking for long long... yes
 checking for long double... yes
 checking for wchar_t... yes
 checking for wint_t... yes
 checking for inttypes.h... yes
 checking for stdint.h... yes
 checking for intmax_t... yes
 checking whether printf() supports POSIX/XSI format strings... no
 checking for working alloca.h... no
 checking for alloca... yes
 checking for stdlib.h... (cached) yes
 checking for unistd.h... (cached) yes
 checking for getpagesize... yes
 checking for working mmap... yes
 checking whether we are using the GNU C Library 2.1 or newer... no
 checking whether integer division by zero raises SIGFPE... yes
 checking for unsigned long long... yes
 checking for inttypes.h... yes
 checking whether the inttypes.h PRIxNN macros are broken... no
 checking for stdint.h... (cached) yes
 checking for SIZE_MAX... yes
 checking for stdint.h... (cached) yes
 checking for ld used by GCC... 
/usr/src/sys/pkgsrc/mail/elmo/work/.wrapper/bin/ld
 checking if the linker (/usr/src/sys/pkgsrc/mail/elmo/work/.wrapper/bin/ld) is 
GNU ld... yes
 checking for shared library run path origin... done
 checking for ptrdiff_t... no
 checking argz.h usability... no
 checking argz.h presence... no
 checking for argz.h... no
 checking limits.h usability... yes
 checking limits.h presence... yes
 checking for limits.h... yes
 checking locale.h usability... yes
 checking locale.h presence... yes
 checking for locale.h... yes
 checking nl_types.h usability... yes
 checking nl_types.h presence... yes
 checking for nl_types.h... yes
 checking malloc.h usability... yes
 checking malloc.h presence... yes
 checking for malloc.h... yes
 checking stddef.h usability... yes
 checking stddef.h presence... yes
 checking for stddef.h... yes
 checking for stdlib.h... (cached) yes
 checking for string.h... (cached) yes
 checking for unistd.h... (cached) yes
 checking sys/param.h usability... yes
 checking sys/param.h presence... yes
 checking for sys/param.h... yes
 checking for asprintf... yes
 checking for fwprintf... no
 checking for getcwd... yes
 checking for getegid... yes
 checking for geteuid... yes
 checking for getgid... yes
 checking for getuid... yes
 checking for mempcpy... no
 checking for munmap... yes
 checking for putenv... yes
 checking for setenv... yes
 checking for setlocale... yes
 checking for snprintf... yes
 checking for stpcpy... no
 checking for strcasecmp... yes
 checking for strdup... yes
 checking for strtoul... yes
 checking for tsearch... yes
 checking for wcslen... yes
 checking for __argz_count... no
 checking for __argz_stringify... no
 checking for __argz_next... no
 checking for __fsetlocking... no
 checking whether _snprintf is declared... no
 checking whether _snwprintf is declared... no
 checking whether feof_unlocked is declared... no
 checking whether fgets_unlocked is declared... no
 checking whether getc_unlocked is declared... yes
 checking for iconv... no, consider installing GNU libiconv
 checking for nl_langinfo and CODESET... yes
 checking for LC_MESSAGES... yes
 checking for bison... bison
 checking version of bison... 2.0, ok
 checking whether NLS is requested... yes
 checking whether included gettext is requested... no
 checking for GNU gettext in libc... no
 checking for GNU gettext in libintl... (cached) yes
 checking whether to use NLS... yes
 checking where the gettext function comes from... external libintl
 checking how to link with libintl... /usr/lib/libintl.so
 checking gpgme.h usability... yes
 checking gpgme.h presence... yes
 checking for gpgme.h... yes
 checking gpgme4/gpgme.h usability... no
 checking gpgme4/gpgme.h presence... no
 checking for gpgme4/gpgme.h... no
 checking for gpgme-config... /usr/pkg/bin/gpgme-config
 checking for GPGME - version >= 0.4.2... yes
 checking for OpenSSL include files... found in /usr/include
 checking for OpenSSL libraries... found in /usr/lib
 checking for library containing initscr... -lncurses
 checking for library containing socket... none required
 checking for library containing gethostbyname... none required
 checking for library containing hstrerror... none required
 checking getopt.h usability... yes
 checking getopt.h presence... yes
 checking for getopt.h... yes
 checking wordexp.h usability... no
 checking wordexp.h presence... no
 checking for wordexp.h... no
 checking glob.h usability... yes
 checking glob.h presence... yes
 checking for glob.h... yes
 checking ncurses/ncurses.h usability... no
 checking ncurses/ncurses.h presence... no
 checking for ncurses/ncurses.h... no
 checking ncurses.h usability... yes
 checking ncurses.h presence... yes
 checking for ncurses.h... yes
 checking curses.h usability... yes
 checking curses.h presence... yes
 checking for curses.h... yes
 checking for locale.h... (cached) yes
 checking sys/dir.h usability... yes
 checking sys/dir.h presence... yes
 checking for sys/dir.h... yes
 checking for unsigned... yes
 checking size of unsigned... 4
 checking for scandir... yes
 checking for getopt_long... yes
 checking for mmap... yes
 checking whether to trace memory leaks... no
 configure: creating ./config.status
 config.status: creating Makefile
 config.status: creating po/Makefile.in
 config.status: creating po/Makefile
 config.status: creating po/POTFILES
 config.status: creating intl/Makefile
 config.status: creating themes/Makefile
 config.status: creating doc/Makefile
 config.status: creating src/Makefile
 config.status: creating config.h
 config.status: executing depfiles commands
 config.status: executing default-1 commands
 config.status: creating po/POTFILES
 config.status: creating po/Makefile
 
  Debugging information: no
            GPG support: yes
        OpenSSL support: yes
 
 ===> Building for elmo-1.3.1
 cd . && /bin/sh ./config.status config.h
 config.status: creating config.h
 config.status: config.h is unchanged
 /usr/bin/make  all-recursive
 Making all in doc
 cd .. && /bin/sh ./config.status doc/Makefile 
 config.status: creating doc/Makefile
 Making all in intl
 Making all in po
 Making all in src
 cd .. && /bin/sh ./config.status src/Makefile depfiles
 config.status: creating src/Makefile
 config.status: executing depfiles commands
 source='elmo.c' object='elmo.o' libtool=no  depfile='.deps/elmo.Po' 
tmpdepfile='.deps/elmo.TPo'  depmode=gcc /bin/sh ../depcomp  cc -DHAVE_CONFIG_H 
-I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'elmo.c' || echo 
'./'`elmo.c
 In file included from 
/usr/src/sys/pkgsrc/mail/elmo/work/.buildlink/include/openssl/buffer.h:66,
                  from 
/usr/src/sys/pkgsrc/mail/elmo/work/.buildlink/include/openssl/x509.h:64,
                  from 
/usr/src/sys/pkgsrc/mail/elmo/work/.buildlink/include/openssl/ssl.h:177,
                  from networking.h:39,
                  from elmo.c:65:
 /usr/include/stddef.h:43: warning: empty declaration
 source='status.c' object='status.o' libtool=no  depfile='.deps/status.Po' 
tmpdepfile='.deps/status.TPo'  depmode=gcc /bin/sh ../depcomp  cc 
-DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'status.c' || echo 
'./'`status.c
 source='folder.c' object='folder.o' libtool=no  depfile='.deps/folder.Po' 
tmpdepfile='.deps/folder.TPo'  depmode=gcc /bin/sh ../depcomp  cc 
-DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'folder.c' || echo 
'./'`folder.c
 source='cmd.c' object='cmd.o' libtool=no  depfile='.deps/cmd.Po' 
tmpdepfile='.deps/cmd.TPo'  depmode=gcc /bin/sh ../depcomp  cc -DHAVE_CONFIG_H 
-I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'cmd.c' || echo './'`cmd.c
 source='mbox.c' object='mbox.o' libtool=no  depfile='.deps/mbox.Po' 
tmpdepfile='.deps/mbox.TPo'  depmode=gcc /bin/sh ../depcomp  cc -DHAVE_CONFIG_H 
-I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'mbox.c' || echo 
'./'`mbox.c
 mbox.c: In function `mbox_box_mail_count':
 mbox.c:264: warning: passing arg 3 of `file_whole' from incompatible pointer 
type
 source='mlex.c' object='mlex.o' libtool=no  depfile='.deps/mlex.Po' 
tmpdepfile='.deps/mlex.TPo'  depmode=gcc /bin/sh ../depcomp  cc -DHAVE_CONFIG_H 
-I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'mlex.c' || echo 
'./'`mlex.c
 source='xmalloc.c' object='xmalloc.o' libtool=no  depfile='.deps/xmalloc.Po' 
tmpdepfile='.deps/xmalloc.TPo'  depmode=gcc /bin/sh ../depcomp  cc 
-DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'xmalloc.c' || echo 
'./'`xmalloc.c
 source='line.c' object='line.o' libtool=no  depfile='.deps/line.Po' 
tmpdepfile='.deps/line.TPo'  depmode=gcc /bin/sh ../depcomp  cc -DHAVE_CONFIG_H 
-I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'line.c' || echo 
'./'`line.c
 source='hash.c' object='hash.o' libtool=no  depfile='.deps/hash.Po' 
tmpdepfile='.deps/hash.TPo'  depmode=gcc /bin/sh ../depcomp  cc -DHAVE_CONFIG_H 
-I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'hash.c' || echo 
'./'`hash.c
 source='address.c' object='address.o' libtool=no  depfile='.deps/address.Po' 
tmpdepfile='.deps/address.TPo'  depmode=gcc /bin/sh ../depcomp  cc 
-DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'address.c' || echo 
'./'`address.c
 source='clock.c' object='clock.o' libtool=no  depfile='.deps/clock.Po' 
tmpdepfile='.deps/clock.TPo'  depmode=gcc /bin/sh ../depcomp  cc 
-DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'clock.c' || echo 
'./'`clock.c
 source='mailreader.c' object='mailreader.o' libtool=no  
depfile='.deps/mailreader.Po' tmpdepfile='.deps/mailreader.TPo'  depmode=gcc 
/bin/sh ../depcomp  cc -DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include 
-I/usr/pkg/include -Wall -DLOCALEDIR='"/usr/pkg/share/locale"' 
-DSYSCONFDIR='"/usr/pkg/etc"' -DDATADIR='"/usr/pkg/share/elmo"' 
-I/usr/pkg/include -I/usr/pkg/include -O2 -mieee -I/usr/include 
-I/usr/pkg/include -c `test -f 'mailreader.c' || echo './'`mailreader.c
 source='rstring.c' object='rstring.o' libtool=no  depfile='.deps/rstring.Po' 
tmpdepfile='.deps/rstring.TPo'  depmode=gcc /bin/sh ../depcomp  cc 
-DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'rstring.c' || echo 
'./'`rstring.c
 source='multree.c' object='multree.o' libtool=no  depfile='.deps/multree.Po' 
tmpdepfile='.deps/multree.TPo'  depmode=gcc /bin/sh ../depcomp  cc 
-DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'multree.c' || echo 
'./'`multree.c
 source='mail.c' object='mail.o' libtool=no  depfile='.deps/mail.Po' 
tmpdepfile='.deps/mail.TPo'  depmode=gcc /bin/sh ../depcomp  cc -DHAVE_CONFIG_H 
-I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'mail.c' || echo 
'./'`mail.c
 mail.c: In function `find_parent':
 mail.c:104: warning: cast from pointer to integer of different size
 mail.c:105: warning: cast from pointer to integer of different size
 mail.c: In function `put_msgid_into_hash':
 mail.c:127: warning: cast to pointer from integer of different size
 mail.c:128: warning: cast to pointer from integer of different size
 mail.c: In function `prepare_nodes_array':
 mail.c:881: warning: cast to pointer from integer of different size
 mail.c: In function `insert_mail':
 mail.c:889: warning: cast from pointer to integer of different size
 source='debug.c' object='debug.o' libtool=no  depfile='.deps/debug.Po' 
tmpdepfile='.deps/debug.TPo'  depmode=gcc /bin/sh ../depcomp  cc 
-DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'debug.c' || echo 
'./'`debug.c
 source='rarray.c' object='rarray.o' libtool=no  depfile='.deps/rarray.Po' 
tmpdepfile='.deps/rarray.TPo'  depmode=gcc /bin/sh ../depcomp  cc 
-DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'rarray.c' || echo 
'./'`rarray.c
 source='maildir.c' object='maildir.o' libtool=no  depfile='.deps/maildir.Po' 
tmpdepfile='.deps/maildir.TPo'  depmode=gcc /bin/sh ../depcomp  cc 
-DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'maildir.c' || echo 
'./'`maildir.c
 maildir.c: In function `reset_array':
 maildir.c:350: warning: cast to pointer from integer of different size
 maildir.c: In function `is_in_array':
 maildir.c:372: warning: cast from pointer to integer of different size
 source='file.c' object='file.o' libtool=no  depfile='.deps/file.Po' 
tmpdepfile='.deps/file.TPo'  depmode=gcc /bin/sh ../depcomp  cc -DHAVE_CONFIG_H 
-I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'file.c' || echo 
'./'`file.c
 source='error.c' object='error.o' libtool=no  depfile='.deps/error.Po' 
tmpdepfile='.deps/error.TPo'  depmode=gcc /bin/sh ../depcomp  cc 
-DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'error.c' || echo 
'./'`error.c
 source='select.c' object='select.o' libtool=no  depfile='.deps/select.Po' 
tmpdepfile='.deps/select.TPo'  depmode=gcc /bin/sh ../depcomp  cc 
-DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include -I/usr/pkg/include -Wall 
-DLOCALEDIR='"/usr/pkg/share/locale"' -DSYSCONFDIR='"/usr/pkg/etc"' 
-DDATADIR='"/usr/pkg/share/elmo"' -I/usr/pkg/include -I/usr/pkg/include -O2 
-mieee -I/usr/include -I/usr/pkg/include -c `test -f 'select.c' || echo 
'./'`select.c
 source='box_selection.c' object='box_selection.o' libtool=no  
depfile='.deps/box_selection.Po' tmpdepfile='.deps/box_selection.TPo'  
depmode=gcc /bin/sh ../depcomp  cc -DHAVE_CONFIG_H -I. -I. -I..    
-I/usr/include -I/usr/pkg/include -Wall -DLOCALEDIR='"/usr/pkg/share/locale"' 
-DSYSCONFDIR='"/usr/pkg/etc"' -DDATADIR='"/usr/pkg/share/elmo"' 
-I/usr/pkg/include -I/usr/pkg/include -O2 -mieee -I/usr/include 
-I/usr/pkg/include -c `test -f 'box_selection.c' || echo './'`box_selection.c
 source='confread.c' object='confread.o' libtool=no  
depfile='.deps/confread.Po' tmpdepfile='.deps/confread.TPo'  depmode=gcc 
/bin/sh ../depcomp  cc -DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include 
-I/usr/pkg/include -Wall -DLOCALEDIR='"/usr/pkg/share/locale"' 
-DSYSCONFDIR='"/usr/pkg/etc"' -DDATADIR='"/usr/pkg/share/elmo"' 
-I/usr/pkg/include -I/usr/pkg/include -O2 -mieee -I/usr/include 
-I/usr/pkg/include -c `test -f 'confread.c' || echo './'`confread.c
 source='networking.cc' object='networking.o' libtool=no  
depfile='.deps/networking.Po' tmpdepfile='.deps/networking.TPo'  depmode=gcc 
/bin/sh ../depcomp  c++ -DHAVE_CONFIG_H -I. -I. -I..    -I/usr/include 
-I/usr/pkg/include  -O2 -mieee -I/usr/include -I/usr/pkg/include -c -o 
networking.o `test -f 'networking.cc' || echo './'`networking.cc
 In file included from 
/usr/src/sys/pkgsrc/mail/elmo/work/.buildlink/include/openssl/buffer.h:66,
                  from 
/usr/src/sys/pkgsrc/mail/elmo/work/.buildlink/include/openssl/x509.h:64,
                  from 
/usr/src/sys/pkgsrc/mail/elmo/work/.buildlink/include/openssl/ssl.h:177,
                  from networking.cc:48:
 /usr/include/stddef.h:43: declaration does not declare anything
 *** Error code 1
 
 Stop.
 make: stopped in /usr/src/sys/pkgsrc/mail/elmo/work/elmo-1.3.1/src
 *** Error code 1
 
 Stop.
 make: stopped in /usr/src/sys/pkgsrc/mail/elmo/work/elmo-1.3.1
 *** Error code 1
 
 Stop.
 make: stopped in /usr/src/sys/pkgsrc/mail/elmo/work/elmo-1.3.1
 *** Error code 1
 
 Stop.
 make: stopped in /usr/src/sys/pkgsrc/mail/elmo
 ===> 
 ===> There was an error during the ``build'' phase.
 ===> Please investigate the following for more information:
 ===>      * log of the build
 ===>      * /usr/src/sys/pkgsrc/mail/elmo/work/.work.log
 ===> 
 *** Error code 1
 
 Stop.
 make: stopped in /sys/pkgsrc/mail/elmo
 
 >How-To-Repeat:
        make mail/elmo in pkgsrc-current
 >Fix:
        
 
 ----- End forwarded message -----
Prev by Date: Re: pkg/30464
Next by Date: Re: pkg/30484
Previous by Thread: pkg/30471: mail/elmo fails during build
Next by Thread: Re: pkg/30471: mail/elmo fails during build
Indexes:
Home | Main Index | Thread Index | Old Index