PR/39750 CVS commit: pkgsrc/emulators/simh

[OBATA Akio <obache%netbsd.org@localhost>]

The following reply was made to PR pkg/39750; it has been noted by GNATS.

From: OBATA Akio <obache%netbsd.org@localhost>
To: gnats-bugs%gnats.NetBSD.org@localhost
Cc: 
Subject: PR/39750 CVS commit: pkgsrc/emulators/simh
Date: Sat,  1 Nov 2008 05:15:42 +0000 (UTC)

 Module Name:   pkgsrc
 Committed By:  obache
 Date:          Sat Nov  1 05:15:42 UTC 2008
 
 Modified Files:
        pkgsrc/emulators/simh: Makefile PLIST distinfo
        pkgsrc/emulators/simh/patches: patch-aa patch-ab patch-ac
 
 Log Message:
 Update simh to 3.8.0.
 Based on PR 39750 and some clean up.
 
 ChangeLog
 V3.8.0 15-Jun-2008
 SCP and libraries:
 
     * Fixed bug in local/global register search (found by Mark Pizzolato)
     * Fixed bug in restore of RO units (from Mark Pizzolato)
     * Added SET/SHO/NO BR with default argument (from Dave Bryan)
     * Worked around Telnet negotiation problem with QCTerm (from Dave Bryan)
 
 GRI-909:
 
     * Added GRI-99 support
 
 HP2100 (all changes from Dave Bryan):
 
     * Implemented 12966A Buffered Asynchronous Communications Interface 
simulator
     * Added SET CPU DEBUG and OS/VMA flags, enabled OS/VMA
     * Corrected MP W5 (JSB) jumper action, SET/SHOW reversal, mp_mevff clear 
on interrupt with I/O instruction in trap cell
     * Removed DBI support from 1000-M (was temporary for RTE-6/VM)
     * Enabled EMA and VIS, added EMA, VIS, and SIGNAL debug flags
     * Enabled SIGNAL instructions, SIG debug flag
     * Fixed single stepping through interrupts
     * Implemented VMA, OS, VIS, SIGNAL, and EMA firmware extensions
     * Fixed unsigned divide bug in .DDI
     * Fixed unsigned multiply bug in .DMP
     * Fixed B register return bug in /CMRT
     * DS disk: corrected and verified ioCRS action
     * MUX: sync mux poll with console poll for idle compatibility
     * PTR: fixed trailing null counter for tape re-read
     * CLK: synchronized CLK with TTY if set for 10 msec.
     * TTY: changed TTY output wait from 100 to 200 for MSU BASIC
 
 Nova (all changes from Bruce Ray):
 
     * Added CPU support for third-party 64KW memory
     * Added CPU history support
     * Renamed CLK to RTC, to match DG literature
     * Renamed DK to DKP, to match DG literature
     * Changed DKP bootstrap to DG official sequence
     * Rename DP to DSK, to match DG literature
     * Changed DSK bootstrap to DG official sequence
     * Renamed MT to MTA, to match DG literature
     * Changed MTA bootstrap to DG official sequence
 
 PDP11:
 
     * Fixed DMA memory address limit test (found by John Dundas)
     * Fixed MMR0 treatment in RESET (found by Walter Mueller)
     * Fixed write behavior of 11/70 MBRK, LOSIZE, HISIZE (found by Walter 
Mueller)
     * Added support to set default state of KDJ11B,E clock control register
     * Added support for DC11
     * Added support for KE11A
     * Added support for KG11A (from John Dundas)
     * Added support for RC11 (from John Dundas)
     * Added modem control to DL11
     * Rename TTIX/TTOX to DLI/DLO, to match DC11 nomenclature
 
 V3.7.3 02-Sep-2007
 SCP:
 
     * -Fixed bug in SET THROTTLE command
 
 PDP-10:
 
     * Fixed non-portable usage in SHOW HISTORY routine
 
 PDP-11:
 
     * TA: forward op at BOT skips initial file gap
 
 PDP-8:
 
     * CT: forward op at BOT skips initial file gap
     * -CT: fixed handling of BEOT
 
 VAX, VAX780::
 
     * CPU: fixed bug in read access g-format indexed specifiers
 
 V3.7.2 12-Jul-2007
 Ethernet library (from Dave Hittner):
 
     * fixed non-ethernet device removal loop (from Naoki Hamada)
     * added dynamic loading of wpcap.dll;
     * corrected exceed max index bug in ethX lookup
     * corrected failure to look up ethernet device names in the registry on 
Windows XP x64
 
 Honeywell 316/516 (from Theo Engel)
 
     * LPT: fixed loss of last print line (from Theo Engel)
     * MT: fixed bug in write without stop (from Theo Engel)
     * CLK: fixed bug in clock increment (from Theo Engel)
 
 IBM 1401:
 
     * added recognition of overlapped operation modifiers
     * remove restriction on load-mode binary tape operations
     * fixed read tape mark operation (found by Van Snyder)
 
 PDP-1:
 
     * -fixed typo in SBS clear (from Norm Lastovica)
 
 PDP-11:
 
     * RH, RP, TU: CS1 DVA is in the device, not the MBA
 
 PDP-8:
 
     * fixed typo (from Norm Lastovica)
 
 VAX:
 
     * revised idle detector
 
 V3.7.1         12-May-2007
 SCP and libraries:
 
     * fixed bug in get_sim_opt (reported by Don North)
     * fixed bug in RESTORE with changed memory size
     * fixed breakpoint actions in DO command file processing (from Dave Bryan)
 
 HP2100 (all fixes from Dave Bryan):
 
     * IPLI EDT delays DMA completion interrupt for TSB
     * MUX:
     * corrected "mux_sta" size from 16 to 21 elements
     * fixed "muxc_reset" to clear lines 16-20
     * fixed control card OTx to set current channel number
     * fixed to set "muxl_ibuf" in response to a transmit interrupt
     * changed "mux_xbuf", "mux_rbuf" declarations from 8 to 16 bits
     * fixed to set "mux_rchp" when a line break is received
     * fixed incorrect "odd_par" table values
     * reversed test in "RCV_PAR" to return "LIL_PAR" on odd parity
     * fixed mux reset (ioCRS) to clear port parameters
     * fixed to use PUT_DCH instead of PUT_CCH for data channel status
     * added DIAG/TERM modifiers to implement diagnostic mode
 
 PDP-11:
 
     * CPU: changed memory size routine to work with RESTORE
     * HK: NOP and DCLR (at least) do not check drive type
     * HK: MR2 and MR3 only updated on NOP
     * TU: TMK sets FCE only on read (found by Naoki Hamada)
     * XU: added missing FC_RMAL command
     * XU: cleared multicast on write
 
 VAX-11/780:
 
     * modified mbz checks to reflect 780 microcode patches (found by Naoki 
Hamada)
 
 V3.7.0 03-Feb-2007
 SCP and libraries:
 
     * Implemented throttle commands
     * Added idle support
     * Added -e to control error processing in DO command files (from Dave 
Bryan)
     * Fixed handling of non-printable characters in KSR mode
     * Fixed bug in reverse operations for P7B-format tapes
     * Fixed bug in reverse operations across erase gaps
 
 GRI-909:
 
     * Fixed handling of non-printable characters in KSR mode
 
 Honeywell 316/516
 
     * Fixed handling of non-printable characters in KSR mode
 
 HP 2100:
 
     * Reorganized CPU modules for easier addition of new instructions
     * Added Double Integer instructions, 1000-F CPU, 2114 and 2115 CPUs, 12K 
and 24K memory sizes, 12607B and 12578A DMA controllers, and 21xx binary loader 
protection
     * Fixed DMS self-test instruction execution on 1000-M
     * Fixed indirect interrupt holdoff logic
     * Fixed DS REQUEST STATUS to clear status-1 (from Dave Bryan)
     * Added Floating Point Processor (from Dave Bryan)
     * Fixed LPS diag-mode CLC response
 
 IBM 7094:
 
     * Fixed new bug in halt IO wait loop
     * Added IFT, EFT expanded core test instructions
 
 Interdata:
 
     * Removed separate multiplexor clock
     * Added idle support
     * Synced multiplexor poll to real-time clock
     * Fixed handling of non-printable characters in KSR mode
     * Synced keyboard poll to real-time clock
     * Changed line-time clock to be free-running
 
 PDP-1:
 
     * Added 16-channel sequence break system (API) support
     * Added PDP-1D support (including timesharing clock)
     * Added Type 630 data communications subsystem (multiplexer)
     * Separated TTI, TTO for API support
     * Fixed bugs in symbolic character input, block loader
 
 PDP-10:
 
     * Added idle support
     * Synced keyboard poll to real-time clock
     * Added card reader support
 
 PDP-11:
 
     * Added idle support
     * Fixed bug in ASH -32 C value
     * Fixed RF11 unit mask (found by John Dundas)
     * Synced keyboard, Ethernet, and multiplexer polls to real-time clock
     * Added clock coscheduling support
     * Added TA11 (casette) support
     * Changed DHQ11 to be off by default
     * Fixed operand order in EIS instructions (found by W.F.J. Mueller)
 
 PDP-18b:
 
     * Fixed incorrect value of PC on instruction fetch mem mmgt error
     * Fixed PDP-15 handling of mem mmgt traps (sets API 3)
     * Fixed PDP-15 handling of CAL API 4 (sets only if 0-3 inactive)
     * Fixed PDP-15 CAF to clear memory management mode register
     * Fixed boundary test in KT15/XVM (reported by Andrew Warkentin)
     * Added XVM RDCLK instruction
     * Added idle support and infinite loop detection
     * Fixed RF15, DSCD does not clear function register
     * Added PDP-15 instructions for program selection of console duplex status
     * Fxed PDP-15 handling of reader out-of-tape
     * Fixed console and multiplexer handling of non-printable characters in 
KSR mode
     * Changed real-time clock to be free running
     * Synced keyboard poll to real-time clock
 
 PDP-8:
 
     * Fixed SC value after DVI overflow (found by Don North)
     * Added idle support and infinite loop detection
     * Added TA8E support
     * Changed real-time clock to be free running
     * Added ability to disambiguate overlapping IOT definitions in symbolic 
input and output
     * Fxed console handling of non-printable characters in KSR mode
     * Synced keyboard poll to real-time clock
 
 VAX, VAX780:
 
     * Added idle support
     * Fixed operand order in EIS instructions (found by W.F.J. Mueller)
 
 V3.6.1 22-Jul-2006
 SCP:
 
     * Implemented SET/SHOW PCHAR
 
 all DECtapes:
 
     * Fixed conflict in ATTACH switches
 
 HP2100 (from Dave Bryan):
 
     * Added CAPACITY as alternate for REEL
     * Fixed EOT test for unlimited reel size
 
 IBM 1620 (from Tim McBride):
 
     * Fixed card reader fgets call
     * Fixed card reader boot sequence
 
 IBM 7094:
 
     * Fixed bug in halt IO wait loop
     * Fixed bug in reading full 80 column binary cards
     * Added binary loader (courtesy of Dave Pitt)
 
 Interdata 32b:
 
     * Fixed transcription errors in disk boot loader (found by Davis Johnson)
 
 PDP-1:
 
     * Fixed bugs in MUS and DIV
 
 PDP-11:
 
     * CIS: added interrupt tests to character instructions
     * CIS: added 11/44 stack probe test to MOVCx (only)
     * KL11/DL11: first release
     * RF11: first release
     * TTI, TTO: added UC support to TTI, TTO
 
 18b PDP's:
 
     * CPU: fixed RESET to clear AC, L, and MQ
     * DT: fixed checksum calculation bug for Type 550
     * FPP: fixed bugs in left shift, multiply
     * TTI, TTO: fixed Baudot letters/figures inversion for PDP-4
     * TTI, TTO: fixed letters/figures tracking for PDP-4
     * TTI, TTO: fixed PDP-4/PDP-7 terminal  default to be local echo
     * Added FioDEC, Baudot display
     * Generalized LOAD to handle HRI, RIM, and BIN files
 
 PDP-8:
 
     * TTIX: fixed bug in DETACH routine
 
 V3.6.0 20-Apr-2006
 SCP and libraries
 
     * Revised save/restore format to check simulator options for consistency
 
 Most magnetic tapes
 
     * Added support for limiting tape capacity to a particular size in MB
 
 IBM 7094 - First release
 
 VAX and VAX-11/780 (most bugs found by Tim Stark)
 
     * Added KESU capability to virtual examine
     * Fixed bugs in virtual examine
     * Rewrote CPU history function for improved usability
     * Fixed fault cleanup to clear PSL<tp>
     * Fixed ADAWI r-mode to preserve dst<31:16>
     * Fixed ACBD/G to test correct operand
     * Fixed access checking on modify-class specifiers
     * Ffixed branch address calculation in CPU history
     * Fixed bug in reported VA on faulting cross-page write
     * Fixed POLYD, POLYG to clear R4, R5
     * Fixed POLYD, POLYG to set R3 correctly
     * Fixed POLYD, POLYG to not exit prematurely if arg = 0
     * Fixed POLYD, POLYG to do full 64b multiply
     * Fixed POLYF, POLYD, POLYG to remove truncation on add
     * Fixed POLYF, POLYD, POLYG to mask multiply result to 31b/63b/63b
     * Fixed fp add routine to test for zero via fraction to support "denormal" 
argument from POLYF, POLYD, POLYG
     * Fixed bug in 32b floating multiply routine
     * Fixed bug in 64b extended modulus routine
 
 VAX-11/780 only (most bugs found by Tim Stark)
 
     * Added FLOAD command, loads system file from console floppy disk
     * Fixed MOVTC, MOVTUC to preserve cc's through page faults
     * Fixed MOVTUC to stop on translated == escape
     * Fixed CVTPL to set registers before destination reg write
     * Fixed CVTPL to set correct cc bit on overflow
     * Fixed EDITPC to preserve cc's through page faults
     * Fixed EDITPC EO$BLANK_ZERO count, cc test
     * Fixed EDITPC EO$INSERT to insert fill instead of blank
     * Fixed EDITPC EO$LOAD_PLUS/MINUS to skip character
     * Fixed MNEGH to test negated sign, clear C
     * Fixed carry propagation in qp_inc, qp_neg, qp_add
     * Fixed pack routines to test for zero via fraction
     * Fixed ACBH to set cc's on result
     * Fixed POLYH to set R3 correctly
     * Fixed POLYH to not exit prematurely if arg = 0
     * Fixed POLYH to mask multiply result to 127b
     * Fixed fp add routine to test for zero via fraction to support "denormal" 
argument from POLYH
     * Fixed EMODH to concatenate 15b of 16b extension
     * Fixed bug in reported VA on faulting cross-page write
     * Added access check on system PTE reference in TLB miss flows
     * Added MBZ checking in LDPCTX and MTPR
     * Compatibility mode: fixed omission of SXT
     * Compatibility mode: fixed order of operand fetching in XOR
     * CR: added CR11/CD11 support
 
 Honeywell 316
 
     * CPU: fixed bugs in LLL, LRL (found by Theo Engel)
     * LPT: fixed bug in blanks backscanning (found by Theo Engel)
     * TTY: fixed bugs in punch state handling (found by Theo Engel)
 
 IBM 1401 - Fixed bug in divide (reported by Van Snyder)
 
 Interdata
 
     * CPU: fixed bug in DH (found by Mark Hittinger)
     * SELCH: fixed bug, GO preserves EXA and SSTA (found by Davis Johnson)
     * IDC: fixed WD/WH handling (found by Davis Johnson)
     * IDC: fixed bug, nop command should be ignored (found by Davis Johnson)
 
 NOVA - Fixed bug in DIVS (found by Mark Hittinger)
 
 PDP-11
 
     * CPU: fixed order of operand XOR operand fetch for SDSD-type models
     * CIS: fixed bug in decode table (found by John Dundas)
     * CIS: fixed bug in ASHP
     * CIS: fixed bug in write decimal string with mmgt enabled
     * CIS: fixed bug in 0-length strings in multiply/divide
     * CR: added CR11/CD11 support (from John Dundas)
     * TC: fixed READ to set extended data bits in TCST (found by Alan Frisbie)
 
 V3.5.2 20-Jan-2006
 All 7-track tapes: added write support for P7B format
 
 All console terminals: KSR/UC output suppresses non-printable characters
 
 PDP10:
 
     * RP.c: fixed DCLR not to clear disk address
 
 PDP11 (also VAX, VAX780 where applicable):
 
     * HK: fixed overlapped seek interaction with NOP, etc
     * RH: added enable/disable routine
     * RP, RQ, TQ, TS, TU: widened address display to 64b when USE_ADDR64
     * RP: fixed DCLR not to clear disk address
     * RP, TU: fixed device enable/disable logic to include Massbus adapter
     * RP, TU: widened address display to 64b when USE_ADDR64
     * TU: changed default adapter to TM03 (for VMS)
 
 PDP8:
 
     * DF, RF, DT: fixed unaligned access bug (found by Doug Carman)
     * RL: fixed IOT 61 decoding bug (found by David Gesswein)
 
 VAX:
 
     * CPU: fixed breakpoint detection when USE_ADDR64 option is active
     * CPU: fixed CVTfi to trap on integer overflow if PSW<iv> set
     * Changed default compile options to USE_ADDR64
 
 VAX780: first release
 
 V3.5.1 15-Oct-2005
 IBM 1401:
 
     * Changed character encodings to be consistent with Paul Pierce 709X 
simulator
     * Changed card column binary format to be consistent with Paul Pierce 709X 
simulator
     * Added choice of business or Fortran encoding for card punch, line 
printer , and inquiry terminal output
     * Added mode control for old/new character encodings
 
 IBM 1620: Changed character encodings to be consistent with 7094 and 1401
 
 PDP-11: Fixed bug in autoconfiguration algorithm (missing XU table entry)
 
 VAX:
 
     * Fixed bug in autoconfiguration algorithm (missing XU table entry)
     * Fixed bug in floating point structure definitions with 32b compilation 
option
 
 V3.5.0         09-Sep-2005
 SCP and libraries:
 
     * Fixed to trim trailing spaces on file names
     * sim_ether: added Windows user-defined adapter names (from Timothe Litt)
     * sim_sock: fixed SIGPIPE error on UNIX
     * sim_tape: fixed misallocation of TPC map array in 64b configurations
     * sim_tmxr: added support for SET <unit> DISCONNECT
 
 IBM 1401:
 
     * Fixed clearing of SSB-SSG on reset (reported by Ralph Reinke)
     * Fixed problem with 2, 5 character R, P instructions (reported by Van 
Snyder)
     * Removed error stops from MCE
 
 PDP-11:
 
     * Revised autoconfiguration algorithm and interface
     * Added additional 11/60 registers
     * pdp11_vh: fixed bug in vector display routine
     * pdp11_xu: fixed runt packet processing (found by Tim Chapman)
 
 PDP-15:
 
     * Removed spurious AAS instruction
     * Fixed bug in SHOW TTIX CONN/STATS
     * Fixed bug in SET TTIXn LOG/NOLOG
 
 PDP8
 
     * Fixed bug in SHOW TTIX CONN/STATS
     * Fixed bug in SET TTIXn LOG/NOLOG
 
 HP2100
 
     * Added SET MUXLn DISCONNECT
 
 Interdata:
 
     * fixed bug in SHOW PAS CONN/STATS
     * Added SET PASLn DISCONNECT
 
 SDS
 
     * Fixed bug in SHOW MUX CONN/STATS
     * Added SET MUXLn DISCONNECT
 
 V3.4.0 03-May-05
 SCP and libraries:
 
     * Fixed ASSERT code
     * Revised syntax for SET DEBUG (from Dave Bryan)
     * Revised interpretation of fprint_sym, fparse_sym returns
     * Moved DETACH sanity tests into detach_unit
     * Added test for WSAEINPROGRESS (from Tim Riker)
 
 PDP-10:
 
     * Fixed TU bug, ERASE and WREOF should not clear done (reported by Rich 
Alderson)
     * Fixed TU error reporting
 
 PDP-11:
 
     * Fixed TU error reporting
 
 Interdata 16b:
 
     * Fixed bug in show history routine (from Mark Hittinger)
     * Revised examine/deposit to do words rather than bytes
 
 Interdata 32b:
 
     * Fixed bug in initial memory allocation
     * Fixed bug in show history routine (from Mark Hittinger)
     * Revised examine/deposit to do words rather than bytes
 
 HP2100 (all changes and fixes from Dave Bryan)
 
     * CPU: reorganized CPU options
     * CPU1: reorganized EIG routines
     * Added FFP support
 
 V3.3.2 09-Mar-05
 SCP: added ASSERT command (from Dave Bryan)
 
 PDP-11:
 
     * Fixed bugs in RESET for 11/70 (reported by Tim Chapman)
     * Fixed bug in SHOW MODEL (from Sergey Okhapkin)
     * Made SYSID variable for 11/70 (from Tim Chapman)
     * Fixed MBRK write case for 11/70 (from Tim Chapman)
     * RQ: added RA60, RA71, RA81 disks
     * RY: fixed bug in boot code (reported by Graham Toal)
 
 H316
 
     * Fixed IORETURN macro
     * PT: fixed bug in OCP '0001 (found by Philipp Hachtmann)
     * MT: fixed error reporting from OCP (found by Philipp Hachtmann)
 
 HP2100 (from Dave Bryan)
 
     * Fixed missing MPCK on JRS target
     * Removed EXECUTE instruction (is NOP in actual microcode)
     * Fixed missing negative overflow renorm in StoreFP
 
 I1401: fixed bug in LPT write line routine (reported by Van Snyder)
 
 Interdata 32b: fixed branches to mask new PC (from Greg Johnson)
 
 VAX:
 
     * Fixed initial state of cpu_extmem
     * RQ: added RA60, RA71, RA81 disks
 
 V3.3.1 08-Jan-05
 H316:
 
     * Fxed bug in DIV
     * TTY: fixed bug in SKS '104 (reported by Philipp Hachtmann)
     * TTY: fixed bug in SKS '504
     * Added reader/punch ASCII file support
     * Added Teletype reader/punch support
     * DP: fixed bug in skip on !seeking
     * MT: fixed bug in DMA/DMC support
     * LP: fixed bug in DMA/DMC support
 
 HP2100:
 
     * Fixed DMA reset to clear alternate CTL flop (from Dave Bryan)
     * Fixed DMA reset to not clear control words (from Dave Bryan)
     * Fixed SBS, CBS, TBS to do virtual reads
     * Separated A/B from M[0/1], for DMA IO (from Dave Bryan)
     * Added SET CPU 21MX-M, 21MX-E (from Dave Brian)
     * Disabled TIMER/EXECUTE/DIAG instructions for 21MX-M (from Dave Bryan)
     * Added post-processor to maintain T/M consistency (from Dave Bryan)
     * DS: first release
     * LPS, LPT: added restart when set online, etc (from Dave Bryan)
     * LPS: col count for non-printing characters (from Dave Bryan)
 
 IBM 1401: added address argument support (from Van Snyder)
 
 Interdata: added magtape read-only file support
 
 PDP-11:
 
     * Fixed WAIT to work in all modes (from John Dundas)
     * TM, TS: added read-only file support
 
 SDS 940: added magtape read-only file support
 
 
 To generate a diff of this commit:
 cvs rdiff -r1.26 -r1.27 pkgsrc/emulators/simh/Makefile
 cvs rdiff -r1.8 -r1.9 pkgsrc/emulators/simh/PLIST
 cvs rdiff -r1.12 -r1.13 pkgsrc/emulators/simh/distinfo
 cvs rdiff -r1.7 -r1.8 pkgsrc/emulators/simh/patches/patch-aa
 cvs rdiff -r1.5 -r1.6 pkgsrc/emulators/simh/patches/patch-ab
 cvs rdiff -r1.4 -r1.5 pkgsrc/emulators/simh/patches/patch-ac
 
 Please note that diffs are not public domain; they are subject to the
 copyright notices on the relevant files.